Suitable fill definition

Suitable fill means fill material which is:
Suitable fill means fill material which meets the requirements of N.J.A.C. 7:9A-10.1(f).
Suitable fill means fill material which is stable, compacted, well graded, pervious, not adversely affected by water and frost, devoid of trash or similar foreign matter, tree stumps, or other organic material; and is fitting for the purpose of supporting the intended use and/or permanent structure.

Examples of Suitable fill in a sentence

  • Suitable fill material is to be used and should be compacted multiple times to reduce settling.

  • Suitable fill material shall be placed in 15cm layers, each layer being well watered and consolidated by approved hand or mechanical tampers or other suitable means to achieve the required density.

  • Suitable fill materials, as defined herein, granular materials, and topsoil obtained from locations arranged for by Design-Builder (off the Site).

  • Suitable fill material shall be spread in layers of not more than 8 inches (loose) over the full area of the fill, and compacted to the required density by the use of compaction equipment.

  • Suitable fill materials include the following soil types based on the Unified Soil Classification System (USCS): GW, GP, SW, and SP.

  • Suitable fill material must be placed in thin lifts, with a maximum loose-lift thickness of eight (8) inches.

  • Suitable fill material (“Clean Soil”) as defined in this document is soil that will not have an adverse effect on human health or the environment when imported to the receiving site.

  • Suitable fill will normally be sufficiently dry to develop soil suctions on compaction.

  • Suitable fill material should be placed in thin lifts (lift thickness depends on type of equipment used, but generally lifts of 8 inches loose measurements are recommended).

  • The two data sets were collected over Cooke City, Montana and environs in July 2006 by the HyMap31 visible near infrared and shortwave infrared (VNIR/SWIR) airborne sensor.

Related to Suitable fill

  • Receivable File means the documents (whether tangible or electronic) specified in Section 2.02 pertaining to a particular Receivable.

  • Receivable Files means the documents specified in Section 3.3.

  • Case file means a record that is assembled and maintained for each application approved for state cost sharing.

  • Changeable filters means any filter, exclusive of inherent filtration, which can be removed from the useful beam through any electronic, mechanical, or physical process.

  • Membrane filtration means a pressure or vacuum driven separation process in which particulate matter larger than one micrometer is rejected by an engineered barrier, primarily through a size exclusion mechanism, and which has a measurable removal efficiency of a target organism that can be verified through the application of a direct integrity test. This definition includes the common membrane technologies of microfiltration, ultrafiltration, nanofiltration, and reverse osmosis.

  • Lease File means, for each Lease, the Collateral Lease File applicable to such Lease.

  • Jobsite means the immediate work area within the property lines of a single construction project, alteration project, or maintenance project where electrical construction or alteration of electrical wiring is in progress.

  • Direct filtration means a series of processes including coagulation and filtration but excluding sedimentation resulting in substantial particulate removal.

  • Place of manufacture means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

  • Office means the registered office for the time being of the Company;

  • Certificate Administrator’s Website The internet website of the Certificate Administrator, initially located at xxx.xxxxxxx.xxx.

  • Repo Custodian shall have the meaning set forth in the preamble of this Agreement.

  • place of supply means the place of supply as referred to in Chapter V of the Integrated Goods and Services Tax Act;

  • Locations mean one or more of the healthcare or other facilities owned by the Borrower on the Property as identified on Schedule 1.1(a) hereto.

  • Slug loading means any pollutant, including oxygen demanding pollutants, released in a discharge at a flow rate and/or pollutant concentration as to cause interference in the POTW.

  • Contractor System means the information and communications technology system used by the Contractor in performing the Services including the Software, the Contractor Equipment and related cabling (but excluding the Authority System).

  • Contract File means with respect to each Contract, the physical and/or electronic files in which Credit Acceptance maintains the fully executed original counterpart or “authoritative copy” (in each case, for UCC purposes) of the Contract (to the extent required in accordance with Section 3.03 of this Agreement), either a standard assurance in the form commonly used in the industry relating to the provision of a certificate of title or other evidence of lien, the original or electronic instruments modifying the terms and conditions of such Contract and the original or electronic endorsements or assignments of such Contract.

  • Compact state means a state, U.S. commonwealth, possession or trust territory which is a signatory to the interstate compact on the placement of children.

  • Archives means the archives of Michigan.

  • Anchor location means the physical location from which:

  • Tank means an enclosed space which is formed by the permanent structure of a ship and which is designed for the carriage of liquid in bulk.

  • Water supply system means a water distribution system, piping, connection fittings, valves and appurtenances within a building, structure, or premises. Water supply systems are also referred to commonly as premise plumbing systems.

  • Agency Office The office of the Issuing Entity maintained pursuant to Section 3.2 of the Indenture.

  • 17g-5 Information Provider’s Website The 17g-5 Information Provider’s Internet website, which shall initially be located within the Certificate Administrator’s Website (xxx.xxxxxxx.xxx), under the “NRSRO” tab on the page relating to this transaction.

  • Emergency medical services personnel means that term as defined in section 20904 of the public health code, 1978 PA 368, MCL 333.20904.

  • Unfit-for-use tank system means a tank system that has been determined through an integrity assessment or other inspection to be no longer capable of storing or treating hazardous waste without posing a threat of release of hazardous waste to the environment.