Target point definition

Target point means the intersection of the projection of the headform longitudinal axis with the front surface of the vehicle (see point A in Figure 6.).
Target point means this location is defined as the intersection of the headform longitudinal axis projection onto the vehicle (point A on Figure 4).
Target point means the interparagraph of the head form longitudinal axis projection onto the vehicle (point A on Figure 4).

Examples of Target point in a sentence

  • Target point locations were modified so that the trajectory covered by the movement of HapticMASTER robot arm was mapped into a straight line connecting only two virtual target points.

  • Target point BH2α2Sα1HtH1B’ Here is the equation used to calculate the data presented in above figure: Ht = H1+Scosα1tgα2-Ssinα1【Procedure of REM】 Menu P21.REM2.

  • Target point (red), simulation path (blue), robot starting point (green), and obstacle (gray).

  • Figure 12 TMS SetUp Wizard – Target point check Figure 13 TMS SetUp Wizard – Apply Position Press F1 Yes: Confirm the instrument position Set position (see Figure 13)Press F1 Set: Accepts and stores the instrument position After this screen the position of the instrument is stored and can be used in other TMS Applica- tions programs.

  • Include any obstructions from the tower itself in the analysis, (e.g. the wall below the window, walkways around the front of the tower, any railings, etc.) as well as any buildings/terrain around the tower that might block visibility.Target PointLine of Sight Evaluation and Validation– January 2016RTLP-MCX Range Design GuideThe Target point is where LoS is required ‘To’.

  • After the Target point of sale (POS) breach during the holiday shopping season of late 2013 (Vijayan, 2014), so many other retailers were compromised; from Home Depot (Krebs, 2014) and Neiman Marcus (Katz, 2014) to UPS (Hardekopf, 2014 ) and the State of New York (Virtanen, 2014); that Forbes magazine began a running web listing of the top 20 data beaches of 2014 (Forbes, 2014).

  • In the evaluation phase (Algorithm II.1), Algorithm II.1 E (Target point , Tree node ) to concentrate around a single value.

  • Target point BH2α2Sα1HtH1B’ Here is the equation used to calculate the data presented in above figure: Ht = H1+Scosα1tgα2-Ssinα1.

  • BY: (Person Submitting this report)DATE: ------------ Reminder: If the applicant(s) score lower than the Target point total, an Adverse Action Letter must be sent to the applicant(s) and a copy of the Adverse Action letter filed with their application.

  • Selecting the point table with "Target point table" and switching on "Controlword bit 4 (New set- point)" starts positioning to the position data at the set speed, acceleration time constant and deceleration time constant.


More Definitions of Target point

Target point means the intersection of the head form longitudinal axis projection with the vehicle (point A on Figure 4).
Target point for student parachutists means that point on the surface located in the center of the drop zone containing a clearly defined marking of at least ten yards in diameter. The target point for licensed parachutists will be located within the drop zone with an unobstructed radial free distance as required for the class of jumper.
Target point means the intersection of the projection of the headform longitudinal axis with the front surface of the vehicle (see point A in Figure 7.). Copied from gtr, § 3.25.

Related to Target point

  • Target Population means persons with low incomes who have one or more disabilities, including mental illness, HIV or AIDS, substance abuse, or other chronic health condition, or individuals eligible for services provided pursuant to the Lanterman Developmental Disabilities Services Act (Division 4.5 (commencing with Section 4500) of the Welfare and Institutions Code) and may include, among other populations, adults, emancipated minors, families with children, elderly persons, young adults aging out of the foster care system, individuals exiting from institutional settings, veterans, and homeless people.

  • Meet Point A point, designated by the Parties, at which one Party’s responsibility for service begins and the other Party’s responsibility ends.

  • Measurement Point means the emission source for which continuous emission measurement systems (CEMS) are used for emission measurement, or the cross-section of a pipeline system for which the CO2 flow is determined using continuous measurement systems;

  • Exit Point means a border control post or any other place designated by a Member State where animals, falling within the scope of Regulation (EC) No 1/2005, leave the customs territory of the Union;

  • Meet-Point Billing (MPB means the billing associated with interconnection of facilities between two (2) or more LECs for the routing of traffic to and from an IXC with which one of the LECs does not have a direct connection. In a multi-bill environment, each Party bills the appropriate tariffed rate for its portion of a jointly provided Switched Exchange Access Service.

  • Target area means a qualified census tract under Section 42 of the Internal Revenue

  • INTER-CONNECTION POINT/ DELIVERY/ METERING POINT means a single point at 220kV or above, where the power from the Project(s) is injected into the identified ISTS Substation (including the dedicated transmission line connecting the Projects with the substation system) as specified in the RfS document. Metering shall be done at this interconnection point where the power is injected into. For interconnection with grid and metering, the WPDs shall abide by the relevant CERC/ SERC Regulations, Grid Code and Central Electricity Authority (Installation and Operation of Meters) Regulations, 2006 as amended and revised from time to time.

  • Demarcation Point means the point where Qwest owned or controlled facilities cease, and CLEC, End User Customer, premises owner or landlord ownership or control of facilities begin. "Designed, Verified and Assigned Date" or "DVA" means the date on which implementation groups are to report that all documents and materials have been received and are complete.

  • Flash point means the lowest temperature of a liquid at which its vapours form a flammable mixture with air;

  • H-point means the pivot centre of the torso and thigh of the H-point machine when installed in a vehicle seat in accordance with Annex 3. Once determined in accordance with the procedure described in Annex 3, the "H" point is considered fixed in relation to the seat-cushion structure and is considered to move with it when the seat is adjusted in the X direction.

  • Receipt Point(s) means the receipt points set forth in Section 6 of this Toll Schedule.

  • Receipt Point means the receipt/inception point(s) where Crude Oil is received into the Gathering System, as such points are specified in Section II of this tariff.

  • Opium poppy means the plant of the species Papaver somniferum L., except its seeds.

  • Delivery Points means: (i) for natural gas transported by interstate pipelines, the city gate stations of your Utility, and (ii) for electricity, one or more points at which Company, as your agent, has arranged for the delivery of electricity to a third party (such as your Utility) for your account or at your premises.

  • Development Location Point means a single point selected by the Applicant on the proposed Development site that is located within 100 feet of a residential building existing or to be constructed as part of the proposed Development. For a Development which consists of Scattered Sites, this means a single point on the site with the most units that is located within 100 feet of a residential building existing or to be constructed as part of the proposed Development.

  • Meet-Point Billing (MPB) refers to the billing associated with interconnection of facilities between two or more LECs for the routing of traffic to and from an IXC with which one of the LECs does not have a direct connection. In a multi-bill environment, each Party bills the appropriate tariffed rate for its portion of a jointly provided Switched Exchange Access Service.

  • Attachment point means a point on the network at which network assets are connected to assets owned by another person.

  • CO2 means carbon dioxide.

  • Cubic Foot means the volume of gas which occupies one cubic foot when such gas is at a temperature of 60 degrees Fahrenheit, and at a pressure of 14.73 pounds per square inch absolute.

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • Throughput means the measure of production, or factor related to production, used to determine the relationship between the amount of energy used by the target unit and the levels of activity of the target unit, as set out in Schedule 6 to an underlying agreement; “the Tribunal” means the First-tier Tribunal established under the Xxxxxxxx Xxxxxx xxx Xxxxxxxxxxx Xxx 00000;

  • Supply Point means the point of connection between the licensed network and your apparatus or equipment.

  • Delivery Point means the point(s) of connection(s) at which energy is delivered into the Grid System i.e. the Interconnection Point.

  • Production Unit means a facility for generation of electricity made up of a single generation unit or of an aggregation of generation units;

  • Drilling unit means the area fixed for the drilling of one well by order or rule of any state or federal body having authority. If a Drilling Unit is not fixed by any such rule or order, a Drilling Unit shall be the drilling unit as established by the pattern of drilling in the Contract Area unless fixed by express agreement of the Drilling Parties.

  • NGLs means natural gas liquids.