Transponder Performance Specifications definition

Transponder Performance Specifications means the specifications for the performance of the Transponder set forth in Attachment A.
View Source
Transponder Performance Specifications means the specifications attached hereto as Exhibit D.
View Source
Transponder Performance Specifications means the downlink EIRP power levels and saturated flux density (“SFD”) levels for the Service Transponder(s) on a Satellite as referenced to the beam peak level location, as such EIRP power levels and SFD levels may be extrapolated by SES by measurements from one of its monitoring stations or at other convenient locations within the beam. The Transponder Performance Specifications for SES North American Fleet Satellites are made available to Customer at ▇▇▇.▇▇▇.▇▇▇/▇▇▇▇▇▇▇▇▇. The downlink EIRP power levels and SFD levels may change from time to time in the event of the relocation of a Satellite. In the Satellite table, measurement accuracy is ±2.0 dB and SFD assumes a flux control attenuator set to 6 dB.
View Source

Examples of Transponder Performance Specifications in a sentence

  • Technical performance criteria for the Satellite are described in the Transponder Performance Specifications set forth in Attachment A.

  • For purposes of this Section 7.02, interference shall also mean acts or omissions which cause a Transponder to fail to meet its Transponder Performance Specifications.

  • The Satellite contains certain Ku-Band redundant equipment units (individually, a "Transponder Spare"), which are designed as substitutes for equipment units the failure of which could cause a Transponder to fail to meet the Transponder Performance Specifications.

  • Technical performance criteria for the C-3 and the C-4 Transponders referred to in Article 2.A. are described in the Transponder Performance Specifications contained in Attachment ▇.

  • The deactivation of a Lessee Transponder under this Section 8.03 shall be treated as a failure of the capacity to meet the applicable Transponder Performance Specifications.

  • An "outage unit" shall mean the failure of the Lessee Transponders to meet the Transponder Performance Specifications for a [***] period in one day (with each such [***] period in the same day constituting a separate outage unit).

  • PanAmSat, as soon as possible and to the extent technically feasible, shall employ a Transponder Spare in the Satellite as a substitute for any Lessee Transponder equipment unit that has caused any Lessee Transponder to suffer a Confirmed Failure (as defined in Section 12.02) in order to enable such Lessee Transponder to meet the Transponder Performance Specifications.

  • Except as otherwise specifically set forth in this Agreement, the aforementioned credit will be Customer's sole and exclusive remedy for unavailability of Service and/or failure of Service to meet the Transponder Performance Specifications.

  • Exhibit B to this Agreement sets forth the "Transponder Performance Specifications," which are certain technical specifications for the Transponders, including values for each Transponder for polarization isolation, interference between Transponders, frequency response, group delay, amplitude non-linearity, spurious outputs, phase shift, cross talk, stability, transmit EIRP, uplink saturation flux density, and G/T.

  • The aforementioned credit will be Customer’s sole and exclusive remedy for unavailability of Service and/or failure of Service to meet the Transponder Performance Specifications set forth in Attachment A.


More Definitions of Transponder Performance Specifications

Transponder Performance Specifications shall have the meaning set forth in Section 3.02 of the Purchase Agreement.
View Source