USEPA Method 5 definition

USEPA Method 5 means the promulgated Test Method 5 – Determination of Particulate Matter Emissions from Stationary Sources;
USEPA Method 5 means the USEPA Method 5 - Determination of Particulate Matter Emissions From Stationary Sources;
USEPA Method 5 means the most recent version and relevant part of USEPA Method 5 – Determination of particulate matter emissions from stationary sources;

Examples of USEPA Method 5 in a sentence

  • If required, compliance shall be determined by performing a stack test using USEPA Method 5 of 40 CFR Part 60, Appendix A.

  • The method of sampling and analysis shall comply with USEPA Method 5 or Method 17, ISO 9096:2003 or ASTM D3685-98, or a similar iso-kinetic method to the satisfaction of the Council.

  • Here, “particulate matter” is considered the filterable, total suspended particulate matter collected from a USEPA Method 5 stack test.

  • Applicable Compliance Method: Visible particulate emissions shall be determined according to USEPA Method 5 as required in f)(1)a.

  • Refer to Figure 4-5 for a drawing of the USEPA Method 5 sampling apparatus.

  • Unless otherwise provided by applicable rules, emission standards for particulate matter referenced in the conditions of this permit address only filterable particulate, as would be measured by USEPA Method 5 or other appropriate USEPA Test Methods.

  • The Permittee may report all PM emissions measured by USEPA Method 5 as PM10 and PM2.5, in which case separate testing for PM10 or PM2.5 using USEPA Method 201 or 201A need not be performed.

  • This approach conforms to USEPA Method 5 “Determination of Particulate Matter from Stationary Sources”.

  • Following completion of the shakedown period for the affected BOPF baghouse system, the emissions of particulate matter (PM) from the affected BOPF baghouse, as would be measured by USEPA Method 5, 5D or 17, shall not exceed 0.005 grains per dry standard cubic foot (gr/dcsf).

  • Unless otherwise provided by applicable rules, emission standards for particulate matter under applicable regulations that are referenced in the conditions of this permit address only filterable particulate, as would be measured by USEPA Method 5 or other appropriate USEPA Test Methods.


More Definitions of USEPA Method 5

USEPA Method 5 means United States (of America) Environmental Protection Agency Method for Determination of Particulate Matter Emission From Stationary Sources;
USEPA Method 5 means the promulgated Test Method 5 – Determination of Particulate Matter Emissions from Stationary Sources (out of stack filter);
USEPA Method 5 means USEPA Test Method 5 – Determination of Particulate Matter Emissions from Stationary Sources; and
USEPA Method 5 means the United States Environmental Protection Agency Method 5 Determination of particulate matter emissions from stationary sources;

Related to USEPA Method 5

  • Method Detection Level or “MDL” means the minimum concentration of an analyte (substance) that can be measured and reported with a ninety- nine percent (99%) confidence that the analyte concentration is greater than zero (0) as determined by procedure set forth in 40 CFR 136, Appendix B. The method detection level or MDL is equivalent to the LOD.

  • Method detection limit means the minimum concentration of a hazardous substance that can be measured and reported with 99% confidence that the analyte concentration is greater than zero and is determined from analysis of a sample in a given matrix that contains the analyte.

  • Procurement Methods means any one of the procurement modes / methods as provided in the Punjab Procurement Rules 2014 published by the Punjab Procurement Regulatory Authority (PPRA), Government of Punjab.

  • Method Detection Limit (MDL means the minimum concentration of a substance (analyte) that can be measured and reported with 99 percent confidence that the analyte concentration is greater than zero and is determined from analysis of a sample in a given matrix containing the analyte.

  • Alternative method means any method of sampling and analyzing for an air pollutant that is not a reference or equivalent method but that has been demonstrated to the satisfaction of the commissioner and the U.S. EPA to, in specific cases, produce results adequate for a determination of compliance.

  • Settlement Method Election Date With respect to any Settlement of any Transaction, the 2nd Scheduled Trading Day immediately preceding (x) the Valuation Date for such Transaction, in the case of Physical Settlement, or (y) the First Unwind Date for such Transaction, in the case of Cash Settlement or Net Share Settlement.

  • Settlement Method means, with respect to any conversion of Notes, Physical Settlement, Cash Settlement or Combination Settlement, as elected (or deemed to have been elected) by the Company.

  • Statewide popular election means a general election in which

  • Payment Method means a payment method that Stripe accepts as part of the Stripe Payments Services (e.g., a Visa credit card, Klarna).

  • method of polling means a method of casting a vote in a poll, which may be by post, internet, text message or telephone;

  • Non-Administrator Substance Use Disorder Treatment Facility means a Substance Use Disorder Treatment Facility that does not meet the definition of an Administrator Substance Use Disorder Treatment Facility.

  • Brand Name or Equal Specification means a specification which uses one or more manufacturer’s names or catalogue numbers to describe the standard of quality, performance, and other characteristics needed to meet District requirements, and which provides for the submission of equivalent products.

  • Medication-assisted treatment or "MAT" means the use of pharmacologic therapy, often in combination with counseling and behav- ioral therapies, for the treatment of substance use disorders.

  • Standard Methods means the examination and analytical procedures set forth in the most recent edition of "Standard Methods for the Examination of Water and Wastewater" published jointly by the American Public Health Association, the American Water Works Association, and the Water Pollution Control Federation.

  • Market Participant Energy Withdrawal means transactions in the Day-ahead Energy Market and Real-time Energy Market, including but not limited to Demand Bids, Decrement Bids, real-time load (net of Behind The Meter Generation expected to be operating, but not to be less than zero), internal bilateral transactions and Export Transactions, as further described in the PJM Manuals. Market Seller Offer Cap:

  • BPD means barrels per day.

  • Market Participant Energy Injection means transactions in the Day-ahead Energy Market and Real-time Energy Market, including but not limited to Day-ahead generation schedules, real- time generation output, Increment Offers, internal bilateral transactions and import transactions, as further described in the PJM Manuals.

  • Manual Load Dump Warning means a notification from PJM to warn Members of an increasingly critical condition of present operations that may require manually shedding load.

  • Multiple Bill/Single Tariff means the billing method used when Switched Exchange Access Services is jointly provided by the Parties. As described in the MECAB document, each Party will render a bill in accordance with its own tariff for that portion of the service it provides. Each Party will bill its own network access service rates.

  • MBA Delinquency Method Under the MBA Delinquency Method, a loan due on the first of the month is considered 30 days delinquent when all or part of one or more payments remains unpaid as of close of business on the last Business Day of such month.

  • Government energy aggregation program means a program and

  • Multiple Bill/Single Tariff means the billing method used when Switched Exchange Access Services is jointly provided by the Parties. As described in the MECAB document, each Party will render a bill in accordance with its own tariff for that portion of the service it provides. Each Party will bill its own network access service rates.

  • Access Tandem Switch is a Switch used to connect End Office Switches to interexchange Carrier Switches. Qwest's Access Tandem Switches are also used to connect and switch traffic between and among Central Office Switches within the same LATA and may be used for the exchange of local traffic.

  • Treatment zone means a soil area of the unsaturated zone of a land treatment unit within which hazardous constituents are degraded, transformed, or immobilized.

  • ISO-NE Tariff means ISO-NE’s Transmission, Markets and Services Tariff, FERC Electric Tariff No. 3, as amended from time to time.

  • Election Assistance Commission means the commission established by Public