Visible Moisture definition

Visible Moisture means an atmospheric environment containing water in any form that can be seen in natural or artificial light; for example, clouds, fog, rain, sleet, hail, or snow.
Visible Moisture means an atmospheric environment containing water in any form that can be seen in natural or artificial light; for example, clouds, fog, mist, rain, sleet, hail, or snow. GM1 MMEL.125 Operational and maintenance procedures‌VALIDATION OF OPERATIONAL AND MAINTENANCE PROCEDURES
Visible Moisture means an atmospheric environment containing water in any form that can be seen in natural or artificial light; for example, clouds, fog, mist, rain, sleet, hail, or snow.Issue No: MMEL/2 CS MMEL.125 Operational and Maintenance Procedures‌Accomplishment instructions for the operational and maintenance procedures identified in the MMEL by the associated symbols are developed and validated by the applicant. GM1 MMEL.125 Operational and maintenance procedures‌VALIDATION OF OPERATIONAL AND MAINTENANCE PROCEDURES

Examples of Visible Moisture in a sentence

  • Information General Info: Foundation Type Slab on Grade Moisture Presence: Indications of Moisture at Visible Portions None Visible Moisture Presence: Indications of Condensation Present Not at Visible Portions General Info: Slab Foundation Information The inspection of slab foundations is limited to visual portions of the slab only.


More Definitions of Visible Moisture

Visible Moisture means an atmospheric environment containing water in any form that can be seen in natural or artificial light; for example, clouds, fog, mist, rain, sleet, hail, or snow. SUPPLEMENT EMBRAER 170/175/190/195GUIDANCE FOR USE OF THIS SUPPLEMENT 1. This Supplement is applicable to all ERJ 170-100, ERJ 170-200, ERJ 190-100, ERJ 190-100 ECJ and ERJ 190-200 models which have the commercial designation of EMBRAER 170, EMBRAER 175, EMBRAER 190, LINEAGE 1000 and EMBRAER 195, respectively. 2. This Supplement defines the standard of MMEL recommended for the above aircraft type by the European Aviation Safety Agency (EASA) by identifying the differences from the ANAC MMEL. 3. The information presented in the ANAC MMEL for the aircraft type is acceptable to EASA except where superseded by an item in this supplement. NOTE: Items within this supplement will use the same reference number as the corresponding item in the ANAC MMEL. Where an item in this supplement does not appear in the ANAC MMEL, the number will be preceded by “E”, and the sequential reference will commence from “1” again. (e.g. E52-1 would be the first EASA specific item in ATA Chapter 52). Such items will be placed at the end of the related chapter. 4. Unless otherwise stated within this Supplement, the definitions contained in the ANAC MMEL are applicable. However, EASA equivalents must be assumed in reading and applying both. 5. This supplement is based upon the ANAC approved EMBRAER 170/175/190/195 MMEL at Revision 10 dated September 30th, 2014. Additional MMEL alleviation provided by later issues of the ANAC MMEL must not be used until this EASA Supplement has been updated to confirm that issue as the base document. 6. The text presented in bold format within this document highlights parts of the EASA MMEL Supplement entry which differ from the ANAC MMEL entry. SUPPLEMENT EMBRAER 170/175/190/195 INTENTIONALLY LEFT BLANKAIRCRAFTEMBRAER 170/175/190/195REVISION NO: Revision 8DATE: 13 June 2014PAGES22-1(1) System & Sequence Numbers Item(2) Rectification Interval (3) Number installed (4) Number required for dispatch (5) Remarks or Exceptions22 Auto Flight Control System -10-00 Autopilot Channels B 2 0 May be inoperative provided operations do not require their use.NOTE: this system is required to be operative for RVSM operations. -11-01 Guidance Panel (GP) 3) Autopilot (AP) Button B 1
Visible Moisture means an atmospheric environment containing water in any form that can be seen in natural or artificial light; for example, clouds, fog, mist, rain, sleet, hail, or snow. CS MMEL.125 Operational and Maintenance Procedures‌ED Decision 2014/004/RAccomplishment instructions for the operational and maintenance procedures identified in the MMEL by the associated symbols are developed and validated by the applicant. GM1 MMEL.125 Operational and maintenance procedures‌ VALIDATION OF OPERATIONAL AND MAINTENANCE PROCEDURESED Decision 2014/004/R

Related to Visible Moisture

  • Visible area means that portion of the input surface of the image receptor over which incident x-ray photons are producing a visible image.

  • Visible emissions means any emissions, which are visually detectable without the aid of instruments, coming from RACM or asbestos-containing waste material, or from any asbestos milling, manufacturing, or fabricating operation. This does not include condensed, uncombined water vapor.

  • Combustible material means combustible refuse, combustible waste or any other material capable of igniting;

  • Accessible surface means surface of equipment or of an equipment part that can be easily or accidentally touched by persons without the use of a tool.

  • Counterfeit substance means a controlled substance which, or the container or labeling of which, without authorization, bears the trademark, trade name, or other identifying mark, imprint, number or device, or any likeness thereof, of a manufacturer, distributor, or dispenser other than the person who in fact manufactured, distributed, or dispensed the substance.

  • Visible sheen means the presence of a film or sheen upon or a discoloration of the surface of the discharge. A sheen can also be from a thin glistening layer of oil on the surface of the discharge.

  • Combustible liquid means a liquid that has a flash point not less than 37.8 degrees Celsius and not greater than 93.3 degrees Celsius;

  • Visible means capable of being seen, whether or not legible, without visual aid by a person of normal acuity.

  • Combustible means capable of undergoing combustion.

  • Vapor tight means equipment that allows no loss of vapors. Compliance with vapor-tight requirements can be determined by checking to ensure that the concentration at a potential leak source is not equal to or greater than 100 percent of the lower explosive limit (LEL) when measured with a combustible gas detector, calibrated with propane, at a distance of 1 inch (2.54 cm) from the source.

  • Contamination means the presence of, or Release on, under, from or to the environment of any Hazardous Substance, except the routine storage and use of Hazardous Substances from time to time in the ordinary course of business, in compliance with Environmental Laws and with good commercial practice.

  • Low water pressure means water pressure below the regulatory reference level which is the minimum pressure when demand on the system is not abnormal.

  • explosive actuated fastening device means a tool that is activated by an explosive charge and that is used for driving bolts, nails and similar objects for the purpose of providing fixing;

  • Covered Species means the species for which the Bank has been established and for which Credits have been allocated as set forth in Exhibit F-1.

  • noxious liquid substance means any substance designated in Appendix II to this Annex or provisionally assessed under the provisions of Regulation 3(4) as falling into Category A, B, C or D.

  • Accessible route means a continuous, unobstructed path connecting accessible elements and spaces in a building or within a site that can be negotiated by a person with a severe disability using a wheelchair and that is also safe for and usable by people with other disabilities. Interior accessible routes may include corridors, floors, ramps, elevators, and lifts. Exterior accessible routes may include parking access aisles, curb ramps, walks, ramps, and lifts. A route that complies with the appropriate requirements of ANSI A117.1 or a comparable standard is an accessible route.

  • Dangerous Substance means any radioactive emissions and any natural or artificial substance (whether in solid or liquid form or in the form of a gas or vapour and whether alone or in combination with any other substance) which, taking into account the concentrations and quantities present and the manner in which it is being used or handled, it is reasonably foreseeable will cause harm to man or any other living organism or damage to the Environment including any controlled, special, hazardous, toxic, radioactive or dangerous waste.

  • impermeable surface means a surface or pavement constructed and maintained to a standard sufficient to prevent the transmission of liquids beyond the pavement surface, and should be read in conjunction with the term “sealed drainage system” (below).

  • Pests means Birds, Vermin and Insects.

  • Recyclable material means those materials which would

  • Noxious weeds means weeds that are difficult to control effectively, such as Johnson Grass, Kudzu, and multiflora rose.

  • Explosive material means any chemical compound, mixture, or device which produces a substantial instantaneous release of gas and heat spontaneously or by contact with sparks or flame.

  • Geologically hazardous areas means areas that because of their susceptibility to erosion, sliding, earthquake, or other geological events, are not suited to the siting of commercial, residential, or industrial development consistent with public health or safety concerns.

  • Hazardous substance UST system means an UST system that contains a hazardous substance defined in section 101(14) of the Comprehensive Environmental Response, Compensation and Liability Act of 1980 (but not including any substance regulated as a hazardous waste under subtitle C) or any mixture of such substances and petroleum, and which is not a petroleum UST system.

  • Infestation means the presence, within or around a dwelling, of insects, rodents, or other pests.

  • Sediment means solid material, mineral or organic, that is in suspension, is being transported, or has been moved from its site of origin by air, water or gravity as a product of erosion.