Access to and Usage of the Service
Access to and Usage of the Service Sample Clauses
Related to Access to and Usage of the Service
Access to the Services ID’s for access to Vendor Core Research and Analyst Inquiry may not be shared. Access to the Services is restricted to the number of named individuals (each a “Licensed User”) as identified in the Customer Purchase Order.
Access to NID 2.7.3.1 NewPhone may access the customer’s premises wiring by any of the following means and NewPhone shall not disturb the existing form of electrical protection and shall maintain the physical integrity of the NID: 2.7.3.1.1 BellSouth shall allow NewPhone to connect its Loops directly to BellSouth’s multi-line residential NID enclosures that have additional space and are not used by BellSouth or any other telecommunications carriers to provide service to the premises; 2.7.3.1.2 Where an adequate length of the customer’s premises wiring is present and environmental conditions permit, either Party may remove the customer premises wiring from the other Party’s NID and connect such wiring to that Party’s own NID; 2.7.3.1.3 Either Party may enter the subscriber access chamber or dual chamber NID enclosures for the purpose of extending a cross-connect or spliced jumper wire from the customer premises wiring through a suitable “punch-out” hole of such NID enclosures; or 2.7.3.1.4 NewPhone may request BellSouth to make other rearrangements to the customer premises wiring terminations or terminal enclosure on a time and materials cost basis. 2.7.3.2 In no case shall either Party remove or disconnect the other Party’s loop facilities from either Party’s NIDs, enclosures, or protectors unless the applicable Commission has expressly permitted the same and the disconnecting Party provides prior notice to the other Party. In such cases, it shall be the responsibility of the Party disconnecting loop facilities to leave undisturbed the existing form of electrical protection and to maintain the physical integrity of the NID. It will be NewPhone’s responsibility to ensure there is no safety hazard, and NewPhone will hold BellSouth harmless for any liability associated with the removal of the BellSouth Loop from the BellSouth NID. Furthermore, it shall be the responsibility of the disconnecting Party, once the other Party’s loop has been disconnected from the NID, to reconnect the disconnected loop to a nationally recognized testing laboratory listed station protector, which has been grounded as per Article 800 of the National Electrical Code. If no spare station protector exists in the NID, the disconnected loop must be appropriately cleared, capped and stored. 2.7.3.3 NewPhone shall not remove or disconnect ground wires from BellSouth’s NIDs, enclosures, or protectors. 2.7.3.4 NewPhone shall not remove or disconnect NID modules, protectors, or terminals from BellSouth’s NID enclosures. 2.7.3.5 Due to the wide variety of NID enclosures and outside plant environments, BellSouth will work with NewPhone to develop specific procedures to establish the most effective means of implementing this section if the procedures set forth herein do not apply to the NID in question.
Use of the Service 12.1 When using the Service you must comply with: (a) our CRA, including clause 4 of the General Terms, and this clause 12; and (b) any rules, including any acceptable use conditions, imposed by any third party whose content or services you access using the Service or whose Network on which your data transmits. 12.2 Any use of the Service at the Premises is your responsibility. The terms of our CRA apply to you and also to anyone else who uses the Service (regardless of whether you give them permission to do so or not). 12.3 You must ensure that any software you use in relation to the Service is properly licensed. 12.4 The use of a Local Area Network (LAN) for personal use is permitted, however the set-up and configuration of a LAN connected to the modem is not supported by customer service. 12.5 All IP addresses provided by us for your use remain our property. Most Services include a dynamic IP address. A new IP address is usually allocated whenever the computer and modem are rebooted. The IP address remains until the next time the computer and modem are switched off. Where provided, you may configure your computer or modem to connect using a static IP address. 12.6 We may at any time adjust aspects of the Service for security or Network management reasons, including, without limitation: (a) deleting transitory data that has been stored on our servers for longer than 90 days; (b) deleting stored email messages that are older than 90 days; (c) rejecting any incoming email messages and attachments that exceed 30 Megabytes (including encapsulation); (d) delivering access and content via proxy servers; (e) limiting the number of addresses to whom an outgoing email can be sent; (f) refusing to accept incoming email messages to mailboxes that have exceeded the email storage limit; (g) managing the Network to prioritise certain types of Internet traffic over others; and (h) blocking or filtering specific Internet ports. 12.7 You are responsible for providing any security or privacy measures for your computer networks and any data stored on those networks or accessed through the Service. We will not be liable to you in respect of any loss, damage, costs or expenses incurred by you in connection with your failure to provide that security. 12.8 You may request additional users on the Service in accordance with the Pricing Schedule. 12.9 You must take reasonable steps to ensure that others do not gain unauthorised access to the Service through your account. We recommend that you do not disclose your password to others and that you change your password regularly. 12.10 We may monitor use of the Service to investigate a breach (or suspected breach) of the Fair Use Policy or upon the request of an authorised authority. 12.11 Where you provide your own wireless computer connection device, you are responsible for any loss caused by an unauthorised interception of the Service.
Access to Services Subject to and in accordance with the terms of this Agreement, including any Schedules, Company grants You a non-exclusive, non-sublicensable, nontransferable, non-assignable, revocable license for the term of this Agreement to access and use the Services. Services may only be used by Your Users for internal business purposes only. You agree to comply with the terms and conditions of this Agreement, including any Schedules, and with all applicable Company procedures and policies that further define use of the Services. You acknowledge and agree that the actions of any of Your Users with respect to the Services will be deemed to be actions by You and that any breach by any of Your Users of the terms of this Agreement, including any Schedule, will be deemed to be a breach by You.
Scope of the Services UNOPS intends to retain the Contractor for the implementation of the Services, and the Contractor intends to provide the Services. The Contractor has represented to UNOPS that it has the appropriate experience, expertise, licences, and resources to undertake the Services and has agreed to undertake the Services in accordance with the Contract. In reliance on the Contractor’s representations UNOPS has entered into the Contract. The Contract sets out the terms and conditions upon which the Contractor will undertake the Services.
Access to the Site 22.1 The Contractor shall allow the Engineer and any person authorized by the Engineer access to the Site, to any place where work in connection with the Contract is being carried out or is intended to be carried out and to any place where materials or plant are being manufactured / fabricated / assembled for the works.
Use of the Services 1.1 We will make the Oracle services listed in Your order (the “Services”) available to You pursuant to this Agreement and Your order. Except as otherwise stated in this Agreement or Your order, You have the non- exclusive, worldwide, limited right to use the Services during the period defined in Your order, unless earlier terminated in accordance with this Agreement or Your order (the “Services Period”), solely for Your internal business operations. You may allow Your Users (as defined below) to use the Services for this purpose, and You are responsible for their compliance with this Agreement and Your order. 1.2 The Service Specifications describe and govern the Services. During the Services Period, we may update the Services and Service Specifications (with the exception of the Data Processing Agreement as described below) to reflect changes in, among other things, laws, regulations, rules, technology, industry practices, patterns of system use, and availability of Third Party Content (as defined below). Oracle updates to the Services or Service Specifications will not materially reduce the level of performance, functionality, security or availability of the Services during the Services Period of Your order. 1.3 You may not, and may not cause or permit others to: (a) use the Services to harass any person; cause damage or injury to any person or property; publish any material that is false, defamatory, harassing or obscene; violate privacy rights; promote bigotry, racism, hatred or harm; send unsolicited bulk e-mail, junk mail, spam or chain letters; infringe property rights; or otherwise violate applicable laws, ordinances or regulations; (b) perform or disclose any benchmarking or availability testing of the Services; (c) perform or disclose any performance or vulnerability testing of the Services without Oracle’s prior written approval, or perform or disclose network discovery, port and service identification, vulnerability scanning, password cracking or remote access testing of the Services; or (d) use the Services to perform cyber currency or crypto currency mining ((a) through (d) collectively, the “Acceptable Use Policy”). In addition to other rights that we have in this Agreement and Your order, we have the right to take remedial action if the Acceptable Use Policy is violated, and such remedial action may include removing or disabling access to material that violates the policy.
Access to Site 3.05.1 Contractor may enter and leave the premises at all reasonable times without charge. Contractor and its employees may use the common areas and roadways of the premises where it is to perform the services together with all facilities, equipment, improvements, and services provided in connection with the premises for common use. This excludes parking for Contractor’s personnel. Contractor shall repair any damage caused by it or its employees as a result of its use of the common areas.
Description of the service 10.1.1 Automatic transfer service implies a transfer by the bank of the funds from the client’s account without further consent of the client, on the basis of fixed amount determined by the client in its application form or of information provided by the client’s creditor to the bank on the client’s debt. 10.1.2 The parties agree that the payment order created (generated) by the bank for the purposes of automatic transfer services shall have the legal force equal to the document having been printed on the paper and executed by the person(s) authorized to manage of the account. 10.1.3 The bank shall carry out the automatic transfer services in accordance with requirements and conditions stipulated in this agreement, the application on registration for automatic transfer service and the sources disseminated by the bank. 10.1.4 For the purposes of obtaining automatic transfer services the client shall apply to the bank with the application as per paragraph 1.2 of this agreement.
Access to Work District representatives shall at all times have access to the Work, wherever it is, in preparation or in progress. Contractor shall provide safe and proper facilities for such access.
