DEFECTIVE GOODS 20.1 Notwithstanding any certificate and/or receipt that may have been issued by or on behalf of Transnet either in South Africa or overseas, Goods will be accepted at the place of delivery or at the port of shipment, as specified in this Agreement, only as regards outward condition of packages and Transnet retains the right to reject the Goods supplied, on or after arrival at the place to which they are consigned, or after they have been placed in use in South Africa, should they be found defective.
20.2 If Goods are rejected owing to latent defects becoming apparent during machining operations or other preparation necessary on the part of Transnet before they can be put into use, the Supplier shall bear all expenses incurred by Transnet in carrying out such necessary operations.
20.3 If such Goods are rejected, the Supplier will pay the following costs:
a) for Goods purchased in South Africa on an ex works basis, the cost of transport from the Supplier’s works in South Africa to the named destination where the Goods have been rejected by Transnet, plus handling charges and storage, if leviable; or
b) for Goods manufactured overseas, the Supplier shall pay all replacement costs including the overseas inland transport cost, freight and insurance charges incurred plus railage or other inland transport costs from the South African port to the place where the Goods have been rejected by Transnet, including handling charges, storage, landing charges, customs duty and surcharges, if leviable.
20.4 If Transnet requires rejected Goods to be replaced, the Supplier shall, when called upon to do so, arrange prompt replacement of the Goods within the prescribed manufacturing lead times for such Goods, as indicated in Schedule 1.
20.5 If Goods are found to be defective but the defects are, in the opinion of Transnet, not of so serious a nature as to warrant total rejection of the Goods, the Supplier shall, when called upon to do so, remedy or make good such defects at its own cost, or Transnet may remedy or make good such defects at the request of the Supplier and recover from the Supplier all costs or expenses reasonably incurred by it in doing so.
20.6 Should the Supplier fail, when called upon to remedy or make good such defects within a reasonable time or to request Transnet to do so, Transnet may proceed to remedy or make good such defects and thereafter recover from the Supplier all such costs and expenses as aforementioned.
20.7 Any amount recoverable from the Supplier in terms of this clause may, without prejudice to any other legal remedies available to Transnet, be deducted in whole or in part from any monies in the hands of Transnet which are due for payment to the Supplier.
The Goods C12.1 If requested by the Authority, the Contractor shall either provide the Authority with samples of Goods or performance demonstrations of Goods for evaluation and approval at the Contractor’s cost and expense.
C12.2 The Contractor shall ensure that the Goods are fully compatible with any Equipment, to the extent specified in the Specification.
C12.3 The Contractor acknowledges that the Authority relies on the skill and judgment of the Contractor in the supply of the Goods and the performance of its obligations under the Contract.
C12.4 The Contractor shall supply and, where relevant, install the Goods in accordance with the Specification and the Tender and with all applicable provisions of the Contract.
PAYMENT FOR GOODS AND SERVICES a. DIR Customer shall comply with Chapter 2251, Texas Government Code, or applicable local law, in making payments to the Vendor. Payment under a DIR Contract shall not foreclose the right to recover wrongful payments.
b. Payments must be made in accordance with laws and procedures applicable to DIR Customer.
c. DIR Customer agrees to pay the rates and/or prices set by DIR with its vendors. DIR Customer understands these rates and/or prices include a DIR administrative fee.
d. All purchases executed under a DIR Contract will require a DIR Customer purchase order.
Proposed Goods and Services Proposed Goods and Services pdf D/M/WBE Certification OPTIONAL No response Warranty No response
Procurement for Goods and Works Except as ADB may otherwise agree, Goods and Works shall only be procured on the basis of the methods of procurement set forth below: National Competitive Bidding Shopping The methods of procurement are subject to, among other things, the detailed arrangements and threshold values set forth in the Procurement Plan. The Borrower may only modify the methods of procurement or threshold values with the prior agreement of ADB, and modifications must be set out in updates to the Procurement Plan.
Particular Methods of Procurement of Goods and Works International Competitive Bidding. Goods and works shall be procured under contracts awarded on the basis of International Competitive Bidding.
Product Warnings As of the Effective Date, all Products CORE sells and/or distributes for sale in California which do not qualify as Reformulated Products, will bear a clear and reasonable warning pursuant to this Section. CORE further agrees that the warning will be prominently placed with such conspicuousness when compared with other words, statements, designs or devices as to render it likely to be read and understood by an ordinary individual under customary conditions of use. For purposes of this Settlement Agreement, a clear and reasonable warning for the Products shall consist of a warning affixed directly to the product or product packaging, label, or tag, for Products sold in California and containing one of the following statements: WARNING: Reproductive Harm- xxx.X00Xxxxxxxx.xx.xxx OR WARNING: This product can expose you to chemicals, including DEHP, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to xxx.X00Xxxxxxxx.xx.xxx
Eligible Goods and Related Services 4.1 All the Goods and Related Services to be supplied under the Contract shall have their origin in any country that is eligible in accordance with ITT 3.9.
4.2 For purposes of this ITT, the term “goods” includes commodities, raw material, machinery, equipment, and industrial plants; and “related services” include services such as insurance, installation, training, and initial maintenance.
Returned Goods When the use of this Agreement involves the purchase of goods, the following applies: Returned goods, when due to Contractor error (i.e., over-shipment, defective merchandise, unapproved substitution, etc.), shall be returned to the Contractor at the Contractor’s expense. The Contractor shall make arrangements to remove the returned goods from the Ordering Agency premises within seven (7) calendar days after notification. The Contractor shall not apply any restocking or other charges to the Ordering Agency. At the option of the Ordering Agency, replacement items may be accepted and will be shipped within seven (7) calendar days of notification. Failure of the Contractor to arrange for return of the items within the specified time will result in the items being deemed as abandoned property and the Ordering Agency will dispose of accordingly. For orders of custom manufactured items, the Contractor must provide a production sample of the item to the Ordering Agency for acceptance. The production sample must be identical to the item to be provided. The Ordering Agency will provide written acceptance of the item prior to the Contractor continuing with production. Once delivery and acceptance has been completed and the Ordering Agency determines for any reason that any remaining quantities will not be used, the agency may request the return of the custom manufactured items. Acceptance of the return of custom manufactured items will be at the option of the Contractor. Failure of the Contractor to provide a production sample and obtain written approval from the Ordering Agency will result in the Contractor bearing all responsibility and costs associated with the return of these goods. Returned goods of regular catalog stock merchandise, when due to agency error (i.e., over purchase, discontinued use, inventory reduction, etc.) will be accepted by the Contractor if notice is given by the Ordering Agency within six (6) months of delivery and acceptance. All items to be returned must be unused and in their original containers and in suitable condition for resale. Return of regular stock catalog merchandise, when delivery and acceptance exceed six (6) months will be at the option of the Contractor.
COUNTERFEIT GOODS Seller agrees that it will not furnish to Jeppesen Goods or separately-identifiable items or components of Goods that: (i) are an unauthorized copy or substitute of an “Original Equipment Manufacturer” or “Original Component Manufacturer” (collectively, “OEM”) item; (ii) are not traceable to an OEM sufficient to ensure authenticity in OEM design and manufacture; (iii) do not contain proper external or internal materials or components required by the OEM or are not constructed in accordance with OEM design; (iv) have been re- worked, re-marked, re-labeled, repaired, refurbished, or otherwise modified from OEM design but not disclosed as such or are represented as OEM authentic or new; or (v) have not passed successfully all OEM required testing, verification, screening, and quality control processes, (collectively “Counterfeit Goods”). Notwithstanding the foregoing, Goods or items that contain modifications, repairs, re-work, or re-marking as a result of Seller’s or its subcontractor’s design authority, material review procedures, quality control processes or parts management plans, and that have not been misrepresented or mismarked without legal right to do so, will not be deemed Counterfeit Goods. Counterfeit Goods will be deemed nonconforming for this PO under which they were delivered. Seller will implement and/or maintain an appropriate strategy to ensure that Goods furnished to Jeppesen under this PO are not Counterfeit Goods. Seller’s strategy will include, but is not limited to, the direct procurement of items from OEMs or authorized suppliers, conducting approved testing or inspection to ensure the authenticity of items, and, when items are to be procured from non-authorized suppliers, obtaining from such non-authorized suppliers appropriate certificates of conformance that provide one or more of the following: (i) the OEM’s original certificate of conformance for the item; (ii) sufficient records providing unbroken supply chain traceability to the OEM; or (iii) test and inspection records demonstrating the item’s authenticity. If Seller becomes aware or suspects that it has furnished Counterfeit Goods to Jeppesen under this PO, Seller promptly, but in no case later than thirty (30) days from discovery, will notify Jeppesen in writing and replace, at Seller’s expense, such Counterfeit Goods with OEM or Jeppesen- approved Goods that conform to the requirements of this PO. Seller will be liable for all costs related to the replacement of Counterfeit Goods, installation of authentic Goods, and any testing or validation necessitated by the installation of authentic Goods after the Counterfeit Goods have been replaced. Seller bears responsibility for procuring authentic Goods or items from its subcontractors and will ensure that all such subcontractors comply with the requirements of this Section.
