Calibration of In-Situ Instruments Sample Clauses

Calibration of In-Situ Instruments. The pH meter, DO meter and turbidimeter shall be checked and calibrated before use. DO meter and turbidimeter shall be certified by a laboratory accredited under HOKLAS or any other international accreditation scheme, and subsequently re-calibrated at 3 monthly intervals throughout all stages of the water quality monitoring. Responses of sensors and electrodes should be checked with certified standard solutions before each use. Wet bulb calibration for a DO meter shall be carried out before measurement at each monitoring location.
Sample 1
AutoNDA by SimpleDocs
Calibration of In-Situ Instruments. 5.4.9.1 All in-situ monitoring instruments should be checked, calibrated and certified by a laboratory accredited under HOKLAS or any other international accreditation scheme before use and subsequently re-calibrated at three monthly intervals throughout all stages of the water quality monitoring programme. Responses of sensors and electrodes should be checked with certified standard solutions before each use. Wet bulb calibration for a DO meter should be carried out before measurement at each monitoring location. 5.4.9.2 For the on-site calibration of field equipment, the BS 127:1993, Guide to Field and On-Site Test Methods for the Analysis of Water should be observed. 5.4.9.3 Sufficient stocks of spare parts should be maintained for replacements when necessary. Backup monitoring equipment should also be made available so that monitoring can proceed uninterrupted even when some equipment is under maintenance, calibration, etc.
Sample 1
Calibration of In-Situ Instruments. All in-situ monitoring instruments would be calibrated and certified by a laboratory accredited under HOKLAS or any other international accreditation scheme before use, and subsequently re-calibrated at 3 monthly intervals throughout all stages of the water quality monitoring programme. Responses of sensors and electrodes should be checked with certified standard solutions before each use. Wet bulb calibration for a DO probe should be carried out at least once per monitoring day. A zero check in distilled water should be performed with the turbidity probe at least once per monitoring day. The probe should then be calibrated with a solution of known NTU. In addition, the turbidity probe should be calibrated at least twice per month to establish the relationship between turbidity readings (in NTU) and levels of suspended solids (in mg/L). For the on-site calibration of field equipment, the BS 127: 1993, Guide to Field and On-Site Test Methods for the Analysis of Waters should be observed. Sufficient stocks of spare parts should be maintained for replacements when necessary. Backup monitoring equipment should also be made available so that monitoring could proceed uninterrupted even when some equipment is under maintenance, calibration etc.
Sample 1
Calibration of In-Situ Instruments. All in-situ monitoring instruments shall be checked, calibrated and certified by a laboratory accredited under HOKLAS or any other international accreditation scheme before use, and subsequently re-calibrated at 3 monthly intervals throughout all stages of the water quality monitoring. Responses of sensors and electrodes should be checked with certified standard solutions before each use. Wet bulb calibration for a DO meter shall be carried out before measurement at each monitoring location. For the on site calibration of field equipment, the BS 1427:1993, "Guide to Field and on-site test methods for the analysis of waters" should be observed. Sufficient stocks of spare parts should be maintained for replacements when necessary. Backup monitoring equipment shall also be made available so that monitoring can proceed uninterrupted even when some equipment some equipment is under maintenance, calibration, etc. Equipment list and testing methods for water quality baseline monitoring are as follows:
Sample 1

Related to Calibration of In-Situ Instruments

  • Execution of Instruments All deeds, mortgages, bonds, checks, contracts and other instruments pertaining to the business and affairs of the Company shall be signed on behalf of the Company by (i) the Chairman; or (ii) when authorized by resolution(s) of the Directors, the President; or (iii) by such other person or persons as may be designated from time to time by the Directors.

  • FORM OF INSTRUMENTS All instruments and documents delivered in connection with these Master Terms and any Purchase Agreement, and all proceedings to be taken in connection with these Master Terms and any Purchase Agreement and the transactions contemplated herein and therein, shall be in a form as set forth in the attachments hereto, and Funding shall have received copies of such documents as it or its counsel shall reasonably request in connection therewith. Any instrument or document which is substantially in the same form as an attachment hereto or a recital herein will be deemed to be satisfactory as to form.

  • Delivery of Instruments, etc Upon request by the Lender, the Borrower will promptly deliver to the Lender in pledge all instruments, documents and chattel papers constituting Collateral, duly endorsed or assigned by the Borrower.

  • Proof of Execution of Instruments and of Holding of Debt Securities Subject to the provisions of Sections 7.01, 7.02 and 13.09, proof of the execution of any instrument by a Holder or his agent or proxy shall be sufficient if made in accordance with such reasonable rules and regulations as may be prescribed by the Trustee or in such manner as shall be satisfactory to the Trustee. The ownership of Debt Securities of any series shall be proved by the Debt Security Register or by a certificate of the Registrar for such series. The Trustee may require such additional proof of any matter referred to in this Section 8.02 as it shall deem necessary.

  • Compliance with Other Instruments, etc The Servicer is not in violation of any term of its certificate of incorporation or by-laws. The execution, delivery and performance by the Servicer of the Transaction Documents to which it is a party do not and will not (i) conflict with or violate the organizational documents of the Servicer, (ii) conflict with or result in a breach of any of the terms, conditions or provisions of, or constitute a default under, or result in the creation of any Lien on any of the properties or assets of the Servicer pursuant to the terms of any instrument or agreement to which the Servicer is a party or by which it is bound where such conflict would have a material adverse effect on the Servicer’s activities or its ability to perform its obligations under the Transaction Documents or (iii) require any consent of or other action by any trustee or any creditor of, any lessor to or any investor in the Servicer.

  • Compliance with Laws, Other Instruments, Etc The execution, delivery and performance by the Company of this Agreement and the Notes will not (i) contravene, result in any breach of, or constitute a default under, or result in the creation of any Lien in respect of any property of the Company or any Subsidiary under, any indenture, mortgage, deed of trust, loan, purchase or credit agreement, lease, corporate charter or by-laws, or any other Material agreement or instrument to which the Company or any Subsidiary is bound or by which the Company or any Subsidiary or any of their respective properties may be bound or affected, (ii) conflict with or result in a breach of any of the terms, conditions or provisions of any order, judgment, decree, or ruling of any court, arbitrator or Governmental Authority applicable to the Company or any Subsidiary or (iii) violate any provision of any statute or other rule or regulation of any Governmental Authority applicable to the Company or any Subsidiary.

  • Recordation of Instrument To the extent permitted by applicable law, this Instrument, or a memorandum thereof if permitted under applicable law, is subject to recordation in all appropriate public offices for real property records in all of the counties or other comparable jurisdictions in which any or all of the properties subject to the Mortgages are situated, and in any other appropriate public recording office or elsewhere, such recordation to be effected by the Master Servicer at the Certificateholders' expense on direction of the related Certificateholders, but only when accompanied by an Opinion of Counsel to the effect that such recordation materially and beneficially affects the interests of the Certificateholders or is necessary for the administration or servicing of the Mortgage Loans.

  • Promotion and Protection of Investments 1. Each Contracting Party shall in accordance with its laws and regulations promote, create favorable conditions for investments by investors of the other Contracting Party and admit such investments. 2. Each Contracting Parly shall at all times accord in its territory to investments of investors of the other Contracting Party fair and equitable treatment and full and constant protection and security. 3. Each Contracting Party shall not impair by unreasonable, arbitrary or discriminatory measures the management, maintenance, use, enjoyment, acquisition or disposal of investments in its territory of investors of the other Contracting Xxxxx.

  • Delivery of Instruments Xxxxxx Xxx shall furnish to each Holder, upon request, copies of this Trust Agreement, without attachments, applicable to the Certificate(s) held by such Holder.

  • Location of Improvements; No Encroachments All improvements which were considered in determining the Appraised Value of the Mortgaged Property lay wholly within the boundaries and building restriction lines of the Mortgaged Property, and no improvements on adjoining properties encroach upon the Mortgaged Property. No improvement located on or being part of the Mortgaged Property is in violation of any applicable zoning law or regulation;

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!