Specific Conditions If applicable, specific conditions required after a risk assessment will be included in Exhibit G. Grantee shall adhere to the specific conditions listed therein.
SUSPENSIVE CONDITIONS 2.1 This entire AGREEMENT is subject to the registration of transfer of ownership of the PROPERTY to the EMPLOYER. In the event that the PROPERTY is not transferred within 6 (six) months from date of signing of this Agreement by the CONTRACTOR, the CONTRACTOR reserves the right to:
2.1.1 increase the CONTRACT SUM, based on the current prices for the building materials, and the CONTRACTOR shall notify the EMPLOYER in writing of such increased cost and the EMPLOYER may then, at his/her option, cancel this agreement by providing written notice of cancellation to the CONTRACTOR within 5 (five) DAYS of receiving written notice from the CONTRACTOR in respect of the increased cost. Should written notice of cancellation not be forthcoming within the aforesaid period, the CONTRACTOR and the EMPLOYER shall proceed with the AGREEMENT at the increased CONTRACT SUM and the EMPLOYER shall be obliged to pay the increase in the CONTRACT SUM to the CONTRACTOR within 21 (twenty one) DAYS of receiving written notice from the CONTRACTOR in respect of the increased cost; or
2.1.2 cancel this AGREEMENT and the parties shall have no claim of whatsoever nature against each other.
2.2 This AGREEMENT is subject further to the EMPLOYER being offered a loan to be secured by a mortgage bond over the PROPERTY and improvements in the amount reflected in Schedule B or such lesser amount as the EMPLOYER may accept, within 30 (thirty) DAYS of the date of the CONTRACTOR’s signature of this AGREEMENT, which period may be extended in the CONTRACTOR’s sole discretion. Should no amount be inserted in the relevant field in the Schedule B, then the suspensive condition contained in this clause will not apply. In the event that the suspensive condition contained in this clause is not fulfilled, this AGREEMENT will lapse and the parties shall have no claim of whatsoever nature against each other.
Other Terms & Conditions 15.6.1. On termination of License Agreement:
a. All third party agreements, entered by the Licensee with respect to the said property business space, shall stand terminated with immediate effect ;
b. In case of termination of agreement on account of Licensee’s Events of Default, the interest free Security Deposit and/or Performance Security shall be forfeited in favour of Maha-Metro. Any outstanding dues payable to Maha-Metro shall be adjusted/ recovered from the advance license fee and forfeited interest free Security Deposit. Balance outstanding dues, if remaining after adjustment of outstanding dues from the advance license fee and interest free Security Deposit, shall be recovered from the licensee.
c. All utilities shall be disconnected with immediate effect, unless otherwise specified elsewhere, and
15.6.2. A notice of vacation shall be issued to the Licensee to vacate the premises within 30 days.
i. On termination of the license agreement, the Licensee shall handover the vacant possession of premises to the Maha-Metro’s authorized representative within 30 days from the date of termination of License Agreement, after removal of plants, equipments, furniture, fixtures, etc. installed by the Licensee at its own cost, without causing damage to Maha-Metro structures. The Licensee shall be allowed to remove their temporary structures, assets like furniture, almirahs, airconditioners, DG sets, equipments, etc without causing damage to the structure. However, the Licensee shall not be allowed to remove any facility, equipment, fixture, etc. which has become an integral part of the development plan of the space. The Licensee agrees voluntarily and un-equivocally not to seek any claim, damages, compensation or any other consideration whatsoever on this account. If the premise is not handed over in good condition as required under this clause, Maha-Metro reserves the right to deduct/ recover damage charges. No grace period shall be provided to licensee, if licensee terminates the contract within the lockin period.
ii. If the Licensee fails to vacate the premises within the grace period of thirty (30) days, penalty of twice the prevalent monthly License Fee shall be chargeable for occupation for this thirty (30) days period. And, after lapse of this 30 (thirty) days grace period, Maha- Metro shall take over the goods / property treating at NIL/ Zero value, even if it is under lock & key; and shall be free to dispose-off the property in whatsoever manner as it deems fit. Licensee shall have no claim for compensation or consideration / damages after completion of grace period. If, licensee fails to pay the penalty, applicable in case of non- vacation of premises, the same shall be adjusted from the Interest Free Security Deposit / Performance Security available with Maha-Metro. No grace period shall be provided to licensee, if licensee terminates the contract within the lock-in period.
iii. After vacating the premises, the Licensee shall submit a vacation certificate from the Maha-Metro’s authorized representative as a proof of Licensee having vacated the site. Licensee’s statement regarding vacation, without a vacation certificate from the Station in-charge or its authorized representative, shall not be accepted.
iv. The termination of this Agreement shall not relieve either party from its obligation to pay any sums then owing to the other party nor from the obligation to perform or discharge any liability that had been incurred prior thereto. The Licensee shall be liable to pay all dues outstanding to Maha-Metro including electricity, chiller and other utility charges under this agreement without prejudice to rights and remedies applicable under the law. The final settlement of dues shall take place after submission of vacation certificate from the Depot in charge or his authorized representative subsequent to termination of License Agreement.
v. On termination of Agreement, Maha-Metro shall have rights to re-enter, re-market or to seal/ lock the Licensed Space.
Safe Working Conditions The Employer undertakes to maintain office furniture, equipment, etc., in a practical and safe condition in order to avoid injury to employees or damage to their attire. Employees, for their part and in their own interest, are expected to advise the Employer of any such potentially injurious equipment.
Unsafe Work Conditions No Employee shall be disciplined for refusal to work on a job which in the opinion of:
(a) A member of a safety committee; or
(b) A person designated by a safety committee; or
(c) A safety officer after an on-site inspection and following discussion with a representative of the Employer, does not meet the standards established pursuant to the Workers' Compensation Act.
Site Conditions A. Existing Site Conditions: Information with respect to the site of the Work given in drawings or specifications has been obtained by County's representatives and is believed to be reasonably correct, but the County does not warrant either the completeness or accuracy of such information, and it is the responsibility of the Contractor to verify all such information.
Unbundled Loop Modifications (Line Conditioning 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Subloop that may diminish the capability of the Loop or Subloop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the BellSouth’s TR 73600 Unbundled Local Loop Technical Specification.
2.5.2 BellSouth will remove load coils only on copper Loops and Subloops that are less than eighteen thousand (18,000) feet in length.
2.5.3 For any copper loop being ordered by NewPhone which has over six thousand (6,000) feet of combined bridged tap will be modified, upon request from NewPhone, so that the loop will have a maximum of six thousand (6,000) feet of bridged tap. This modification will be performed at no additional charge to NewPhone. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper Loop that will result in a combined total of bridged tap between two thousand five hundred (2,500) and six thousand (6,000) feet will be performed at the rates set forth in Exhibit A.
2.5.4 NewPhone may request removal of any unnecessary and non-excessive bridged tap (bridged tap between zero (0) and two thousand five hundred (2,500) feet which serves no network design purpose), at rates pursuant to BellSouth’s SC Process as mutually agreed to by the Parties.
2.5.5 Rates for ULM are as set forth in Exhibit A.
2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered.
2.5.7 If NewPhone requests ULM on a reserved facility for a new Loop order, BellSouth may perform a pair change and provision a different Loop facility in lieu of the reserved facility with ULM if feasible. The Loop provisioned will meet or exceed specifications of the requested Loop facility as modified. NewPhone will not be charged for ULM if a different Loop is provisioned. For Loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the Loop provisioned.
2.5.8 NewPhone shall request Loop make up information pursuant to this Attachment prior to submitting a service inquiry and/or a LSR for the Loop type that NewPhone desires BellSouth to condition.
2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for NewPhone, NewPhone will submit a SI to BellSouth. If a spare Loop facility that meets the Loop modification specifications requested by NewPhone is available at the location for which the ULM was requested, NewPhone will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, NewPhone will not be charged for ULM but will only be charged the service order charges for submitting an order.
Terms & Conditions The Contractor agrees to comply with the Terms and Conditions.
TEACHING CONDITIONS The parties recognize that optimum school facilities for both student and teacher are desirable to insure the high quality of education that is the goal of both the Association and the Board. It is also acknowledged that the primary duty and responsibility of the teacher is to teach and that the organization of the school and school day should be directed toward ensuring that the energy of the teacher is primarily utilized to this end.
Safe Conditions Whenever an employee reports a condition which the employee feels represents a violation of safety or health rules and regulations or which is an unreasonable hazard to persons or property, such conditions shall be promptly investigated. The appropriate administrator shall reply to the concern, in writing, if the employee's concern is communicated in writing.
