Cost and Payment for Changes to the Specifications. (i) For all changes to the Specifications pursuant to Sections 3.2.3(a) or 3.2.3(b), Adolor shall be responsible for and pay Supplier any and all amounts incurred in implementing a change to the Specifications. Supplier must provide such documentation of its costs and expenses as may be reasonably requested by Adolor. Supplier agrees to use commercially reasonable efforts to minimize its costs associated with any Specification change. (ii) For all changes to the Specifications that are necessitated because a change is required to the Facility generally or a class of products (and not specific to the API Compound or intermediates, or their manufacture), Supplier shall be responsible for the costs and expenses of such changes.

Cost and Payment for Changes to the Specifications. (i) For all changes to the Specifications pursuant to Section 3.2.2(a), Client shall be responsible for and pay CRL any and all amounts incurred in implementing a change to the Specifications. For all changes to the Specifications pursuant to Section 3.2.2(b), Client shall be responsible for and pay CRL all amounts set forth in the Cost and Time Statement approved by Client in writing. CRL agrees to use commercially reasonable efforts to minimize its costs associated with any Specification change. (ii) For all changes to the Specifications that are necessitated because a change is required to the Facility generally, CRL shall be responsible for the costs and expenses of such changes.

Cost and Payment for Changes to the Specifications. (i) For all changes to the Specifications pursuant to Sections 3.2.2(a) or 3.2.2(b), Adolor shall be responsible for and pay PII any and all amounts incurred in implementing a change to the Specifications. PII must provide such documentation of its costs and expenses as may be reasonably requested by Adolor. PII agrees to use commercially reasonable efforts to minimize its costs associated with any Specification change. (ii) For all changes to the Specifications that are necessitated because a change is required to the Facility generally, PII shall be responsible for the costs and expenses of such changes.

Cost and Payment for Changes to the Specifications. (i) For all changes to the Specifications pursuant to Sections 3.2.3(a) or 3.2.3(b), except as otherwise set forth in this Section 3.2.3(c); (ii) Adolor shall be responsible for and pay Supplier any and all amounts incurred in implementing a change to the Specifications. Supplier must provide such documentation of its costs and expenses as may be reasonably requested by Adolor. Supplier agrees to use commercially reasonable efforts to minimize its costs associated with any Specification change. (iii) For all changes that are necessitated because a change is required to the Facility generally or a class of products (and not specific to the API Compound), Supplier shall be responsible for the costs and expenses of such changes.

Cost and Payment for Changes to the Specifications. For all changes to the Specifications pursuant to Sections 4.2.1, 4.2.2 or 4.2.3 that are Product specific, all amounts incurred in implementing a change to the Specifications shall be apportioned between the Parties as set forth below in this Section 4.2.4. For all changes to the Specifications pursuant to Sections 4.2.1, 4.2.2 or 4.2.3 that are required to be undertaken by a Product Supplier in order for such Product Supplier to remain in compliance with cGMP or applicable Laws or that generally affect the Product Supplier and not the Product specifically, the Existing Product Suppliers have agreed to be responsible for all amounts incurred in implementing such a change to the Specifications. For all changes to the Specifications pursuant to this Section 4.2, GSK shall, in its discretion, either (a) perform, or arrange for the performance of, all development work in connection therewith or (b) request that Adolor or its Product Supplier prepare a Cost and Time Statement to perform such development work. Adolor must provide such documentation of its or its Product Suppliers’ costs and expenses as may be reasonably requested by GSK. Adolor agrees to use commercially reasonable efforts to minimize its costs associated with any Specification change. At the request of GSK, Adolor shall evaluate the estimated costs and timing of potential revisions to the Specifications. If the changes only affect the Product sold in the ROW, GSK shall be solely responsible for the costs and expenses of such changes, and if the changes affect the Product sold both within and outside the ROW, the costs and expenses shall be apportioned between the two (2) territories and shared in accordance with the cost sharing provisions set forth in the Collaboration Agreement.

Related to Cost and Payment for Changes to the Specifications

Changes to Specifications All Specifications and any changes thereto agreed to by the parties from time to time shall be in writing, dated and signed by the parties. Any change to the Process shall be deemed a Specification change. No change in the Specifications shall be implemented by Catalent, whether requested by Client or requested or required by any Regulatory Authority, until the parties have agreed in writing to such change, the implementation date of such change, and any increase or decrease in costs, expenses or fees associated with such change (including any change to Unit Pricing). Catalent shall respond promptly to any request made by Client for a change in the Specifications, and both parties shall use commercially reasonable, good faith efforts to agree to the terms of such change in a timely manner. As soon as possible after a request is made for any change in Specifications, Catalent shall notify Client of the costs associated with such change and shall provide such supporting documentation as Client may reasonably require. Client shall pay all costs associated with such agreed upon changes. If there is a conflict between the terms of this Agreement and the terms of the Specifications, this Agreement shall control. Catalent reserves the right to postpone effecting changes to the Specifications until such time as the parties agree to and execute the required written amendment.
Modifications and Updates to the Wire Center List and Subsequent Transition Periods 5.4.6.1 In the event AT&T identifies additional wire centers that meet the criteria set forth in Sections 5.4.2.1 or 5.4.2.2 above, but that were not included in the Master List of Unimpaired Wire Centers or AT&T’s List of Unimpaired Wire Centers, AT&T shall include such additional wire centers in a CNL. Each such list of additional wire centers shall be considered a Subsequent Wire Center List. AT&T will follow any limitations on the frequency with which it may issue such lists and notification procedures set forth in applicable Commission orders. 5.4.6.2 TWTC shall have thirty (30) business days to dispute the additional wire centers listed on AT&T’s CNL. Absent such dispute, effective thirty (30) business days after the date of a AT&T CNL providing a Subsequent Wire Center List, AT&T shall not be required to provide DS1 and DS3 Dedicated Transport, as applicable, in such additional wire center(s), except pursuant to the self-certification process as set forth in Section 1.9.1 of this Attachment. 5.4.6.3 For purposes of Section 5.4.6.1 above, AT&T shall make available DS1 and DS3 Dedicated Transport that were in service for TWTC in a wire center on the Subsequent Wire Center List as of the thirtieth (30th) business day after the date of AT&T’s CNL identifying the Subsequent Wire Center List (Subsequent Embedded Base) until one hundred eighty (180) days after the thirtieth (30th) business day Version: 4Q06 Standard ICA 11/30/06 from the date of AT&T’s CNL identifying the Subsequent Wire Center List (Subsequent Transition Period). 5.4.6.4 The rates set forth in Exhibit B shall apply to the Subsequent Embedded Base during the Subsequent Transition Period. 5.4.6.5 No later than one hundred eighty (180) days from AT&T’s CNL identifying the Subsequent Wire Center List, TWTC shall submit an LSR(s) or spreadsheet(s) as applicable, identifying the Subsequent Embedded Base of circuits to be disconnected or converted to other AT&T services. 5.4.6.5.1 In the case of disconnection, the applicable disconnect charges set forth in this Agreement shall apply. 5.4.6.5.2 If TWTC chooses to convert DS1 and/or DS3 Dedicated Transport to special access circuits in existence as of the Effective Date of this Agreement, AT&T will include such DS1 and/or DS3 Dedicated Transport within TWTC’s total special access circuits, and apply any discounts to which TWTC is entitled from the transition period of 3/11/2006 to the conversion date. Conversions will be subject to the switch-as-is charge set forth in Exhibit A to this Attachment 2. 5.4.6.5.3 AT&T shall not impose disconnect or nonrecurring installation charges when transitioning the Subsequent Embedded Base of DS1 and DS3 Dedicated Transport in existence as of the Effective Date of this Agreement. 5.4.6.6 If TWTC fails to submit the LSR(s) or spreadsheet(s) for all of its Subsequent Embedded Base by one hundred eighty (180) days after the date of AT&T’s CNL identifying the Subsequent Wire Center List, AT&T will identify TWTC’s remaining Subsequent Embedded Base, if any, and will transition such circuits to the equivalent tariffed AT&T service(s), or in the case of Georgia, to the equivalent 271 service(s) set forth in Exhibit 1. In the states of Florida, Kentucky, Mississippi and South Carolina, those circuits identified and transitioned by AT&T shall be subject to the applicable disconnect charges as set forth in this Agreement and the full nonrecurring charges for installation of the equivalent tariffed AT&T service as set forth in AT&T’s tariffs. In the states of Alabama, Georgia, North Carolina and Tennessee, those circuits identified and transitioned by AT&T shall be subject to the applicable switch-as-is rates set forth in Exhibit A of Attachment
Certification Regarding Entire TIPS Agreement for Part 1 and Part 2 Contracts 5 This is a two part solicitation. Part 1 is solicited for TIPS sales that are not considered a "public work" construction (1) The TIPS solicitation document resulting in the Agreement; (2) Any addenda or clarifications issued in relation to the corresponding TIPS solicitation; (3) All solicitation information provided to Vendor by TIPS through the TIPS eBid System; (3) Vendor’s entire proposal response to the corresponding TIPS solicitation including all accepted required attachments, acknowledged notices and certifications, accepted negotiated terms, accepted pricing, accepted responses to questions, and accepted written clarifications of Vendor’s proposal, and; any properly included attachments to the TIPS Contract. Does Vendor agree? Yes, Vendor agrees TIPS Members often turn to TIPS Contracts for ease of use and to receive discounted pricing. Vendor must respond with a percentage from 0%-100%. The percentage discount that you input below will be applied to your Part 1 "Catalog Pricing", as defined in the solicitation, for all TIPS Sales made during the life of the contract. You cannot alter this percentage discount once the solicitation legally closes. You will always be required to discount every TIPS Sale by the percentage included below with the exception of limited goods/services specifically identified and excluded from this discount in Vendor’s original proposal. If you add goods or services to your "Catalog Pricing" during the life of the contract, you will be required to sell those new items with this discount applied.
Contractor Changes The Contractor shall notify DAS in writing no later than ten (10) Days from the effective date of any change in: a. its certificate of incorporation or other organizational document; b. more than a controlling interest in the ownership of the Contractor; or c. the individual(s) in charge of the Performance. This change shall not relieve the Contractor of any responsibility for the accuracy and completeness of the Performance. DAS, after receiving written notice by the Contractor of any such change, may require such agreements, releases and other instruments evidencing, to DAS’s satisfaction, that any individuals retiring or otherwise separating from the Contractor have been compensated in full or that provision has been made for compensation in full, for all work performed under terms of the Contract. The Contractor shall deliver such documents to DAS in accordance with the terms of DAS’s written request. DAS may also require, and the Contractor shall deliver, a financial statement showing that solvency of the Contractor is maintained. The death of any Contractor Party, as applicable, shall not release the Contractor from the obligation to Perform under the Contract; the surviving Contractor Parties, as appropriate, must continue to Perform under the Contract until Performance is fully completed.
Changes to the Notice Information Either Party may change this information by giving five Business Days written notice prior to the effective date of the change.
Notice of Network Changes If a Party makes a change in the information necessary for the transmission and routing of services using that Party’s facilities or network, or any other change in its facilities or network that will materially affect the interoperability of its facilities or network with the other Party’s facilities or network, the Party making the change shall publish notice of the change at least ninety (90) days in advance of such change, and shall use reasonable efforts, as commercially practicable, to publish such notice at least one hundred eighty (180) days in advance of the change; provided, however, that if an earlier publication of notice of a change is required by Applicable Law (including, but not limited to, 47 CFR 51.325 through 51. 335) notice shall be given at the time required by Applicable Law.
DAF Specifications Developer shall submit initial specifications for the DAF, including System Protection Facilities, to Connecting Transmission Owner and NYISO at least one hundred eighty (180) Calendar Days prior to the Initial Synchronization Date; and final specifications for review and comment at least ninety (90) Calendar Days prior to the Initial Synchronization Date. Connecting Transmission Owner and NYISO shall review such specifications to ensure that the DAF are compatible with the technical specifications, operational control, and safety requirements of the Connecting Transmission Owner and NYISO and comment on such specifications within thirty (30) Calendar Days of Developer’s submission. All specifications provided hereunder shall be deemed to be Confidential Information.
Program Changes Contractor agrees to inform the County of any alteration in program or service delivery at least thirty (30) days prior to the implementation of the change, or as soon as reasonably feasible.
Changes to the Terms of Use We may revise and update these Terms of Use from time to time in our sole discretion. All changes are effective immediately when we post them, and apply to all access to and use of the Website thereafter. However, any changes to the dispute resolution provisions set out in Governing Law and Jurisdiction will not apply to any disputes for which the parties have actual notice on or before the date the change is posted on the Website. Your continued use of the Website following the posting of revised Terms of Use means that you accept and agree to the changes. You are expected to check this page from time to time, so you are aware of any changes, as they are binding on you.
Maintenance Manual No later than 60 (sixty) days prior to the Project Completion Date, the Contractor shall, in consultation with the Authority’s Engineer, evolve a maintenance manual (the “Maintenance Manual”) for the regular and preventive maintenance of the Project Highway in conformity with the Specifications and Standards, safety requirements and Good Industry Practice, and shall provide 5 (five) copies thereof to the Authority’s Engineer. The Authority’s Engineer shall review the Maintenance Manual within 15 (fifteen) days of its receipt and communicate its comments to the Contractor for necessary modifications, if any.

Cost and Payment for Changes to the Specifications Sample Clauses

Filter & Search

Related Clauses

Parent Clauses

Related to Cost and Payment for Changes to the Specifications