Place and Time The closing of the sale and purchase of the Shares (the “Closing”) shall take place at the offices of Xxxxx Xxxxx & Associates, PLLC, 0 Xxxxx Xxxxxxx Xxxxxx, Xxxxxxxxx Xxxxxx, X.X. 00000 on such date (the “Closing Date”) and time as the parties shall so agree. Except as agreed to by the parties, the Closing shall occur simultaneous with the execution and delivery of this Agreement.
Changes to Specifications All Specifications and any changes thereto agreed to by the parties from time to time shall be in writing, dated and signed by the parties. Any change to the Process shall be deemed a Specification change. No change in the Specifications shall be implemented by Catalent, whether requested by Client or requested or required by any Regulatory Authority, until the parties have agreed in writing to such change, the implementation date of such change, and any increase or decrease in costs, expenses or fees associated with such change (including any change to Unit Pricing). Catalent shall respond promptly to any request made by Client for a change in the Specifications, and both parties shall use commercially reasonable, good faith efforts to agree to the terms of such change in a timely manner. As soon as possible after a request is made for any change in Specifications, Catalent shall notify Client of the costs associated with such change and shall provide such supporting documentation as Client may reasonably require. Client shall pay all costs associated with such agreed upon changes. If there is a conflict between the terms of this Agreement and the terms of the Specifications, this Agreement shall control. Catalent reserves the right to postpone effecting changes to the Specifications until such time as the parties agree to and execute the required written amendment.
Date and Time The provisions of Section 6.3 are subject to any cut-off date and cut-off time agreed between the applicable Novation Netting Offices and Matched Pair Novation Netting Offices of the Parties.
DELIVERY AND PUBLISHING 4.1. Xxxxxxx Science offers publishing via a variety of methods. The parties agree that, at a minimum, and subject to the terms of this Agreement, the Work shall be published in the subscription journal specified, in Schedule 3: Publishing. Additionally, if so specified in the space provided in Schedule 3: Publishing in respect of “Open Access Plus”, and subject to the commercial terms specified therein and the other terms of this Agreement, the Work shall be made available, by Xxxxxxx Science, on an open access basis under the terms of the Creative Commons Attribution 4.0 International Public License (CC- BY 4.0), a copy of which is available at: xxxxx://xxxxxxxxxxxxxxx.xxx/licenses/by/4.0/legalcode .
4.2. The Assignor may, if so specified in the space provided in Schedule 1: Details of the Work, opt to have Xxxxxxx Science, or its third party contractor, provide a short animated video summarising the salient aspects of the Work, on the basis that all rights, title and interest in such short animated video shall become part of the Work for the purposes of this Agreement. The provision of such service by Xxxxxxx Science or its third party contractor shall be subject to the prevailing terms and rates relating to such service. Such animated video shall be made available, by Xxxxxxx Science, on an open access basis under the terms of the Creative Commons Attribution 4.0 International Public License (CC-BY-NC-ND 4.0), a copy of which is available at xxxxx://xxxxxxxxxxxxxxx.xxx/licenses/by-nc-nd/4.0/, and Xxxxxxx Science shall retain all rights to exploit the video commercially.
4.3. The Assignor undertakes to provide to Xxxxxxx Science, by the deadline specified in Schedule 1: Details of the Work (the “Submission Deadline”), an electronic copy of the Work in a high-quality, professionally prepared, production-ready format. The Assignor undertakes to ensure that all pages of the Work so submitted have been proof-read carefully, and that all diagrams, illustrations, figures and captions, are of excellent quality, with regard to both substance and form.
4.4. The Assignor represents and warrants that the Work has been prepared in accordance with the relevant Guidelines, and checked for all possible linguistic inconsistencies and errors, including grammar, style and typography, by someone with a high command of the English language and familiarity with academic writing in the English language. (“Guidelines” means the Instructions to Authors available on the Xxxxxxx Science website, as well as the Aims & Scope applicable to the relevant Xxxxxxx Science publication). Xxxxxxx Science’s nominated service provider, Xxxxxxx Science, offers English language support services which Assignor may elect to utilise in respect of the Work by completing the applicable box in Schedule 1: Details of the Work. The provision of such services by Xxxxxxx Science shall be subject to Xxxxxxx 2 [v.122016] Science’s prevailing terms and rates relating to such type of optional support.
DELIVERY AND TITLE A. The place of delivery for all Products sold pursuant to this Agreement shall be FOB Plant. Buyer and Buyer’s agents shall be given access to Seller’s Plant in a manner and at all times reasonably necessary and convenient for Buyer to take delivery as provided herein. Buyer shall schedule the loading and shipping of all outbound Products purchased hereunder which is shipped by rail. All labor and equipment necessary to load rail cars shall be supplied by Seller without charge to Buyer. Seller agrees to handle all Products in a good and workmanlike manner in accordance with Buyer’s reasonable requirements and in accordance with normal industry practice. Seller shall maintain the rail loading facilities in safe operating condition in accordance with normal industry standards.
B. Seller shall be responsible at all times for the quantity, quality and condition of any Products in storage at the Plant. Seller shall not be responsible for the quantity, quality and condition of any of Products stored by Buyer at locations other than the Plant.
C. Buyer shall give to Seller a schedule of quantities of the Products to be removed by rail with sufficient advance notice reasonably to allow Seller to provide the required services. Seller shall provide the labor, equipment and facilities necessary to meet Buyer’s loading schedule and, except for any consequential or indirect damages, shall be responsible for Buyer’s actual costs or damages resulting from Seller’s failure to do so. Buyer shall order and supply rail cars as scheduled for rail shipments. All freight charges shall be the responsibility of Buyer and shall be billed directly to Buyer.
D. Buyer shall provide loading orders as necessary to permit Seller to maintain Seller’s usual production schedule, provided, however, that Buyer shall not be responsible for failure to schedule removal of the DDGS unless Seller shall have provided to Buyer production schedules as follows: Five (5) days prior to the beginning of each calendar month during the term hereof, Seller shall provide to Buyer a tentative schedule for production in the next calendar month which is to be shipped by railcar. Seller shall inform Buyer daily of inventory and production status. For purposes of this paragraph, notification will be sufficient if made by e-mail or facsimile as follows: If to Buyer, to the attention of Xxxxx Xxxxxxx, Facsimile number 000-000-0000 or email to xxxxxxxx@xxx-xxxxx.xxx, and If to Seller, to the attention of Xxxxx Xxxxxx, Facsimile number 000-000-0000 or email to xxxxx.xxxxxx@xxxxxxxxxxxxxxxxxxxxxxxxx.xxx, Or to such other representatives of Buyer and Seller as they may designate to the other in writing.
E. Title, risk of loss and full shipping responsibility shall pass to Buyer upon loading the DDGS into rail cars and delivering to Buyer of the xxxx of lading for each such shipment.
File Naming Conventions Files will be named according to the following convention: {gTLD}_{YYYY-MM-DD}_{type}_S{#}_R{rev}.{ext} where: {gTLD} is replaced with the gTLD name; in case of an IDN-TLD, the ASCII-compatible form (A-Label) must be used; {YYYY-MM-DD} is replaced by the date corresponding to the time used as a timeline watermark for the transactions; i.e. for the Full Deposit corresponding to 2009-08-02T00:00Z, the string to be used would be “2009-08-02”; {type} is replaced by: “full”, if the data represents a Full Deposit; “diff”, if the data represents a Differential Deposit; “thin”, if the data represents a Bulk Registration Data Access file, as specified in Section 3 of Specification 4; {#} is replaced by the position of the file in a series of files, beginning with “1”; in case of a lone file, this must be replaced by “1”. {rev} is replaced by the number of revision (or resend) of the file beginning with “0”: {ext} is replaced by “sig” if it is a digital signature file of the quasi-homonymous file. Otherwise it is replaced by “ryde”.
Particular Methods of Procurement of Goods and Works International Competitive Bidding. Goods and works shall be procured under contracts awarded on the basis of International Competitive Bidding.
Minimum Shipping Requirements for TIPS Sales Vendor shall ship, deliver, or provide ordered goods and services within a commercially reasonable time after acceptance of the order. If a delay in delivery is anticipated, Vendor shall notify the TIPS Member as to why delivery is delayed and provide an updated estimated time for completion. The TIPS Member may cancel the order if the delay is not commercially acceptable or not consistent with the Supplemental Agreement applicable to the order.
Updates and Upgrades Contractor grants to the Department a non-exclusive, non-transferable license to use upgrades and updates provided by Contractor during the term of the Contract. Such upgrades and updates are subject to the terms of the Contract. The Department shall download, distribute, and install all updates as released by Contractor during the length of the Contract, and Contractor strongly suggests that the Department also downloads, distributes, and installs all upgrades as released by Contractor during the length of the Contract. Contractor shall use commercially reasonable efforts to provide the Department with work-around solutions or patches to reported software problems that may affect the Department’s use of the software during the length of the Contract.
Minimum Site Requirements for TIPS Sales (when applicable to TIPS Sale). Cleanup: When performing work on site at a TIPS Member’s property, Vendor shall clean up and remove all debris and rubbish resulting from their work as required or directed by the TIPS Member or as agreed by the parties. Upon completion of work, the premises shall be left in good repair and an orderly, neat, clean and unobstructed condition. Preparation: Vendor shall not begin a project for which a TIPS Member has not prepared the site, unless Vendor does the preparation work at no cost, or until TIPS Member includes the cost of site preparation in the TIPS Sale Site preparation includes, but is not limited to: moving furniture, installing wiring for networks or power, and similar pre‐installation requirements. Registered Sex Offender Restrictions: For work to be performed at schools, Vendor agrees that no employee of Vendor or a subcontractor who has been adjudicated to be a registered sex offender will perform work at any time when students are, or reasonably expected to be, present unless otherwise agreed by the TIPS Member. Vendor agrees that a violation of this condition shall be considered a material breach and may result in the cancellation of the TIPS Sale at the TIPS Member’s discretion. Vendor must identify any additional costs associated with compliance of this term. If no costs are specified, compliance with this term will be provided at no additional charge. Safety Measures: Vendor shall take all reasonable precautions for the safety of employees on the worksite, and shall erect and properly maintain all necessary safeguards for protection of workers and the public. Vendor shall post warning signs against all hazards created by the operation and work in progress. Proper precautions shall be taken pursuant to state law and standard practices to protect workers, general public and existing structures from injury or damage. Smoking: Persons working under Agreement shall adhere to the TIPS Member’s or local smoking statutes, codes, ordinances, and policies.
