DECORATIONS/STAGE FITTINGS AND LIGHTING Sample Clauses

DECORATIONS/STAGE FITTINGS AND LIGHTING. No stage property, electrical installation, appliance or decorating materials of any kind shall be brought into the facility without the consent of Council. All such items must be removed at the end of the event and, if not so removed, the hirer must pay such sum as Council determines for each day or portion of a day whilst such property remains in the facility. The use of confetti or streamers or similar articles of decoration is prohibited. Smoke machines and helium balloons are not permitted. The floor, walls or any other part of the facility, or any curtains, fittings or furniture, shall not be broken, pierced by nails or screws or in any manner or other way damaged, and no scenery, fittings or decorations of any kind shall be erected in the facility or attached to or affixed to the walls, doors or any other portion of the facility, curtains, fittings or furniture, mechanical, electrical or other equipment. The hirer will be liable on demand to pay the full cost of cleaning of or repairs occasioned by damage to the facility or any furniture or fittings as a result of the hiring. Wall decorations must only be put up using blue-tack. No tape or adhesives are permitted. Notification of any lighting changes or requirements must be made at time of booking lodgement. In the event of special electrical equipment being used, the hirer must first obtain Council's consent, which consent may be given subject to conditions including the payment of extra charges to Council and the engagement of and payment for the services of a qualified electrician.
Sample 1Sample 2Sample 3See All (5)
AutoNDA by SimpleDocs
DECORATIONS/STAGE FITTINGS AND LIGHTING. No stage property, electrical installation, appliance or decorating materials of any kind shall be brought into the facility without the consent of GLYC. All such items must be removed at the end of the event and, if not removed, the hirer must pay such sum as GLYC determines for each day or portion of a day whilst such property remains in the facility. The following items /actions are not permitted:- • Use of confetti, streamers or similar articles of decoration. • Smoke machines. • The use of nails, screws, sticky tape or adhesives etc to attach decorations or scenery to the floor, walls or any other part of the facility, or any curtains, fittings, furniture or electrical equipment . Wall decorations may only be put up using blue-tack.). The hirer will be liable on demand to pay the full cost of cleaning or repairs to the facility or any furniture or fittings as a result of the hiring. Notification of any lighting changes or requirements must be made at time of booking lodgement.
Sample 1

Related to DECORATIONS/STAGE FITTINGS AND LIGHTING

  • Installation, Maintenance, Testing and Repair Unless otherwise agreed in writing by the Parties, to the extent required by Applicable Law, Interconnection provided by a Party shall be equal in quality to that provided by such Party to itself, any subsidiary, affiliates or third party. If either Party is unable to fulfill its obligations under this Section 14.2, it shall notify the other Party of its inability to do so and will negotiate alternative intervals in good faith. The Parties agree that to the extent required by Applicable Law, the standards to be used by a Party for isolating and clearing any disconnections and/or other outages or troubles shall be at parity with standards used by such Party with respect to itself, any subsidiary, affiliate or third party.

  • Decoration 22.1 The Tenant shall decorate the Property as often as is reasonably necessary and also in the last three months before the end of the term.

  • Carpet Cleaning Shampooing carpets with the deep dirt extraction (steam cleaning) method per manufactures recommendations.

  • Decorations The only acceptable form of affixing items to walls is the use of white sticky tack, and must be removed by the Resident prior to move out, or be subject to removal charges. Spikes, hooks, screws, tacks or nails or any permanent adhesion type tape shall not be put into or on the walls or woodwork, ceilings, furnishings, doors or windows of any part of the Residence. Residents may not decorate the outside of their room door unless for special occasions approved by the Manager. Strings of indoor lights should not be in direct contact with any flammable materials and should not be left on while the room is unattended.

  • Installations 2.1. This test shall be conducted with either the complete REESS or with a related REESS subsystem(s) including the cells and their electrical connections. If the manufacturer chooses to test with related subsystem(s), the manufacturer shall demonstrate that the test result can reasonably represent the performance of the complete REESS with respect to its safety performance under the same conditions. If the electronic management unit for the REESS is not integrated in the casing enclosing the cells, then the electronic management unit may be omitted from installation on the Tested-Device if so requested by the manufacturer.

  • Maintenance, Alteration and Repair (a) Resident is responsible for and agrees to take good care of the premises, fixtures and all common areas. Resident may not remove any of Owner’s property and will not perform any repairs, upgrades, painting, wallpapering, electric changes or other alterations of the premises without prior written consent from Owner. Resident will be responsible for damage from waste stoppages caused by foreign or improper objects or improper use in lines serving bathrooms, damage to fixtures, appliances, doors, windows, screens, damage from water faucets left on or from doors left open, and repairs or replacements to alarm devices necessitated by misuse or damage by Resident and/or guests. Extraordinary appliances or furnishings such as satellite dishes, hot tubs, pool tables, water beds or high utility-consuming devices may not be installed or placed on the premises or anywhere at the Property without Owner’s prior written consent, in its sole discretion. SAMPLE

  • Installation and Maintenance Except for the bi‐directional and production metering equipment owned by the City, all equipment on Customer’s side of the delivery point, including the required disconnect device, shall be provided and maintained in satisfactory operating condition by Customer and shall remain the property and responsibility of the Customer. The City will bear no responsibility for the installation or maintenance of Customer’s equipment or for any damage to property as a result of any failure or malfunction thereof. The City shall not be liable, directly or indirectly for permitting or continuing to allow the interconnection of the Facility or for the acts or omissions of Customer or the failure or malfunction of any equipment of Customer that causes loss or injury, including death, to any party.

  • MAINTENANCE AND REPAIR; RULES Tenant will, at its sole expense, keep and maintain the Premises and appurtenances in good and sanitary condition and repair during the term of this Agreement and any renewal thereof. Without limiting the generality of the foregoing, Tenant shall:

  • Routine Maintenance, Construction, and Repair The NYISO or Connecting Transmission Owner may interrupt interconnection service or curtail the output of the Small Generating Facility and temporarily disconnect the Small Generating Facility from the New York State Transmission System or Distribution System when necessary for routine maintenance, construction, and repairs on the New York State Transmission System or Distribution System. The NYISO or the Connecting Transmission Owner shall provide the Interconnection Customer with five Business Days notice prior to such interruption. The NYISO and Connecting Transmission Owner shall use Reasonable Efforts to coordinate such reduction or temporary disconnection with the Interconnection Customer.

  • Lighting A system of fixtures providing or controlling the light sources used on or near the airport or within the airport buildings. The field lighting includes all luminous signals, markers, floodlights, and illuminating devices used on or near the airport or to aid in the operation of aircraft landing at, taking off from, or taxiing on the airport surface.

Time is Money Join Law Insider Premium to draft better contracts faster.