Description of Projects Services a. Project/Services to be performed by A-E shall consist of the work as specified herein and as required in Attachment A. If in the event Attachment A shall be in conflict with any provision of this Contract, the wording as set forth in Attachment A shall prevail. b. A-E shall be responsible for submitting all Projects/Services to County in a form which has been thoroughly reviewed and checked for completeness, accuracy and consistency by the registered professional named in Section 1.1.2 herein; and, any Projects/Services not meeting this requirement will be returned to A-E prior to review by County.
Description of Property A narrative description of the Real Estate, the improvements thereon and the tenants and Leases relating to such Real Estate.
DESCRIPTION OF PROJECT For the Company to be eligible to earn the Maximum Credit Amount, the Company will satisfy its obligations as reflected in the following representations, which the IEDC has relied upon: A. The Company will complete the Project at the Project Location. B. The Company represents that the number of permanent, Full-Time Employees (as defined in Indiana Code § 6–3.1–13–4) from whom Indiana state income tax withholdings are retained by the State of Indiana, employed as of the Commencement Date at the Project Location, is the Base Employment Number. C. The Project will result in the creation of New Employees (as defined in Indiana Code § 6- 3.1-13-6) at the Project Location of at least the Additional Jobs Commitment. D. The average of the hourly wages, before benefits, paid to New Employees at the Project Location, will at least equal the Average Wage Commitment. E. At the discretion of the IEDC, New Employees that are paid an average wage of less than the Minimum Wage Commitment may be excluded for the purpose of calculating the credit amount. F. The Project is anticipated to involve at least the Capital Investment Amount.
Description of Services A description of Google Workspace for Education Service provided by Google is set forth in the Services Summary located at xxxxx://xxxxxxxxx.xxxxxx.xxx/terms/user_features.html.
Description of Service 2.9.1.1 BellSouth shall make available to <<customer_short_name>> LMU information with respect to Loops that are required to be unbundled under this Agreement so that <<customer_short_name>> can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment <<customer_short_name>> intends to install and the services <<customer_short_name>> wishes to provide. LMU is a preordering transaction, distinct from <<customer_short_name>> ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering LMU are likewise unique from other preordering functions with associated SIs as described in this Agreement. 2.9.1.2 BellSouth will provide <<customer_short_name>> LMU information consisting of the composition of the Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair-gain devices; the Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to <<customer_short_name>> as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC for facilities is contingent upon either BellSouth or the requesting CLEC controlling the Loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility used or controlled by another CLEC unless BellSouth receives a LOA from the voice CLEC (owner) or its authorized agent on the LMUSI submitted by the requesting CLEC. 2.9.1.5 <<customer_short_name>> may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by <<customer_short_name>> and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (e.g., ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee <<customer_short_name>>’s ability to provide advanced data services over the ordered Loop type. Furthermore, the LMU information for Loops other than copper-only Loops (e.g., ADSL, UCL-ND, etc.) that support xDSL services, is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Except as set forth in Section 2.9.1.6, copper-only Loops will not be subject to change due to modification and/or upgrades to BellSouth’s network and will remain on copper facilities until the Loop is disconnected by <<customer_short_name>> or the End User, or until BellSouth retires the copper facilities via the FCC’s and any applicable Commission’s requirements. <<customer_short_name>> is fully responsible for any of its service configurations that may differ from BellSouth’s technical standard for the Loop type ordered. 2.9.1.6 If BellSouth retires its copper facilities using 47 C.F.R § 52.325(a) requirements; or is required by a governmental agency or regulatory body to move or replace copper facilities as a maintenance procedure, BellSouth will notify <<customer_short_name>>, according to the applicable network disclosure requirements. It will be <<customer_short_name>>’s responsibility to move any service it may provide over such facilities to alternative facilities. If <<customer_short_name>> fails to move the service to alternative facilities by the date in the network disclosure notice, BellSouth may terminate the service to complete the network change.
Description of Funding Techniques 6.2.1 The following are terms under which standard funding techniques shall be implemented for all transfers of funds to which the funding technique is applied in section 6.3.2 of this Agreement. Funding Technique Name Description Actual Clearance, ZBA - Same Day Payment The State shall request funds the same day it pays out funds, in accordance with the appropriate Federal agency cut-off time specified in Exhibit I. A Federal agency will deposit funds in a State account the same day as requested. The amount of the request shall be for the amount of funds that clear the State's account that day. This funding technique is interest neutral. Composite Clearance The State shall request funds such that they are deposited on the dollar-weighted average number of days required for funds to be paid out for a series of disbursements, in accordance with the clearance pattern specified in Exhibit II. The request shall be made in accordance with the appropriate Federal agency cut-off time specified in Exhibit I. The amount of the request shall be the sum of the payments issued in the series of disbursements. This funding technique is interest neutral. Pre-Issuance The State shall request funds such that they are deposited in a State account not more than three business days prior to the day the State makes a disbursement. The request shall be made in accordance with the appropriate Federal agency cut-off time specified in Exhibit I. The amount of the request shall be the amount the State expects to disburse. This funding technique is not interest neutral. 6.2.2 The following are terms under which funding techniques for administrative costs shall be implemented for all transfers of funds to which the funding technique is applied in section 6.3.2 of this Agreement. Funding Technique Name Description Actual Costs - Estimated Allocation - Monthly The State shall request funds once a month, such that they are deposited on the median day of the month, to fund the activity of the prior month. The request shall be made in accordance with the appropriate Federal agency cut-off time specified in Exhibit I. The amount of the request shall be an estimate based on the actual costs of the month distributed to the program according to the allocation of costs for the preceding six months. This funding technique is interest neutral. 6.2.3 The following are terms under which miscellaneous funding techniques shall be implemented for all transfers of funds to which the funding technique is applied in section 6.3.2 of this Agreement. There are currently no funding techniques listed in Section 6.2.3. 6.2.4 The following are terms under which State unique funding techniques shall be implemented for all transfers of funds to which the funding technique is applied in section 6.3.2 of this Agreement. There are currently no programs listed for Section 6.2.4.
DESCRIPTION OF PREMISES In consideration of the performance of all the covenants and conditions herein, as of the effective date of residence, the BSC does hereby undertake to provide room or room and board service to Member as described below. This Contract does not guarantee specific apartment complexes, apartments, houses, rooms, room sizes, or roommates, and the BSC reserves the right to reassign members within the BSC, at any time during the term hereof, in order to make the most effective use of available space, or for any other reason to further the harmony, effectiveness or other organizational goals that the Board of Directors may from time to time determine. As such, Member may have exclusive or non-exclusive rights to use the apartment/bedroom they are assigned (depending on whether or not they are assigned a roommate(s)) and non-exclusive rights to use the common areas of the unit to which they are assigned.
Description of Notes 1 Section 1.2. Commitment, Closing Date ....................................
Description of Facility Provide the following information for all units at the Facility, regardless of their RMR designation status. Information regarding units not designated as Reliability Must-Run Units is required only if and to the extent that the information is used to allocate Facility costs between Reliability Must-Run Units and other units. Unit RMR (Y/N) Maximum Net Dependable Capacity (includes CAISO-paid Upgrade capacity)* Fuel Type For this Facility, the Owner will use [insert either MW, MWhs, or service hours] in Schedule B to allocate Annual Fixed Revenue Requirements to and among Units. This election shall be applicable to all Facilities containing Reliability Must Run Units subject to any “RMR contract” as defined in the CAISO Tariff executed by Owner or any of its affiliates as defined in 18 CFR § 161.2. * Maximum Net Dependable Capacity shall reflect any transformer or line loss to the Delivery Point.
Description of Processing Include a description of how the disclosed information will be processed by each receiving party.
