Design Approval Procedures for Israeli Supplemental Type Certificates Sample Clauses

Design Approval Procedures for Israeli Supplemental Type Certificates. (a) Israeli Supplemental Type Certificates may be issued under the provisions of CAAI Aircraft Certification Procedure 4.1.29 for approval of major changes to the type design of an aircraft, aircraft engine, or propeller, which has been certificated/validated by the CAAI, when the FAA is the authority of the State of Design for the design change, and the FAA has issued an STC. As part of its involvement in any aspect of the STC, the CAAI may exercise the option to retain the compliance determinations. (b) The CAAI will develop the STC certification basis in accordance with CAAI Aircraft Certification Procedure 4.1.38. The date of application is the date application is made to the FAA for the U.S. STC. (c) U.S. applicants shall submit STC applications to the FAA Aircraft Certification Office responsible for the applicant’s geographic area, with a request that the application and required information be forwarded to the CAAI. Appendix A contains the address for the CAAI. (d) Each application should contain the following information: (1) A description of the change, together with the make and model of the product; (2) A copy of the U.S. STC and the certification basis; and (3) A planning date for CAAI issuance of the STC; (4) A description of all novel or unusual design features which might necessitate issuance of CAAI special conditions; and (5) All exemptions or equivalent level of safety findings granted by the FAA for the U.S. STC. (e) The basic design approval procedures for Israeli Type Certification (paragraph 3.0.2 above) should be used for STCs, but both authorities may agree to streamline these procedures based on the magnitude and complexity of the design change. (f) The following documentation will be required, as applicable, for review by the CAAI during the STC approval process: (1) Compliance Checklist, (2) Airplane/Rotorcraft Flight Manual Supplement, (3) Master Documentation List/Master Drawing List, (4) Manufacturing and Installation Instruction Drawings, (5) Maintenance/Repair Manual Supplements, (6) Weight and Balance Data, and (7) Instructions for Continued Airworthiness. (g) The CAAI will issue an STC when compliance with the applicable CAAI airworthiness requirements has been verified and a compliance statement has been made by the FAA.
Sample 1Sample 2
AutoNDA by SimpleDocs

Related to Design Approval Procedures for Israeli Supplemental Type Certificates

  • DISTRIBUTION OF CONTRACTOR PRICE LIST AND CONTRACT APPENDICES Contractor shall provide Authorized Users with electronic copies of the Contract, including price lists and Appendices, upon request. Contract Updates will be handled as provided in Appendix C – Contract Modification Procedures.

  • Required Procurement Procedures for Obtaining Goods and Services The Grantee shall provide maximum open competition when procuring goods and services related to the grant- assisted project in accordance with Section 287.057, Florida Statutes.

  • Procedures for LNP Request The Parties shall provide for the requesting of End Office LNP capability on a reciprocal basis through a written request. The Parties acknowledge that Verizon has deployed LNP throughout its network in compliance with FCC 96-286 and other applicable FCC Regulations. 15.4.1 If Party B desires to have LNP capability deployed in an End Office of Party A, which is not currently capable, Party B shall issue a LNP request to Party A. Party A will respond to the Party B, within ten (10) days of receipt of the request, with a date for which LNP will be available in the requested End Office. Party A shall proceed to provide for LNP in compliance with the procedures and timelines set forth in FCC 00-000, Xxxxxxxxx 80, and FCC 97-74, Paragraphs 65 through 67. 15.4.2 The Parties acknowledge that each can determine the LNP-capable End Offices of the other through the Local Exchange Routing Guide (LERG). In addition, the Parties shall make information available upon request showing their respective LNP-capable End Offices, as set forth in this Section 15.4.

  • Supplemental Agreements Without Consent of Applicable Certificateholders Without limitation of Section 9.01 of the Basic Agreement, under the terms of, and subject to the limitations contained in, Section 9.01 of the Basic Agreement, the Company may (but will not be required to), and the Trustee (subject to Section 9.03 of the Basic Agreement) shall, at the Company’s request, at any time and from time to time: (i) Enter into one or more agreements supplemental to the Escrow Agreement, the NPA or the Deposit Agreement for any of the purposes set forth in clauses (1) through (9) of such Section 9.01, and (without limitation of the foregoing or Section 9.01 of the Basic Agreement) (a) clauses (2) and (3) of such Section 9.01 shall also be deemed to include the Company’s obligations under (in the case of clause (2)), and the Company’s rights and powers conferred by (in the case of clause (3)), the NPA, and (b) references in clauses (4), (6) and (7) of such Section 9.01 to “any Intercreditor Agreement or any Liquidity Facility” shall also be deemed to refer to “the Intercreditor Agreement, the Liquidity Facility, the Escrow Agreement, the NPA or the Deposit Agreement”, (ii) Enter into one or more agreements supplemental to the Agreement, the Intercreditor Agreement or the NPA to provide for the formation of one or more Additional Trusts, the issuance of Additional Certificates, the purchase by an Additional Trust (if any) of applicable Additional Equipment Notes and other matters incidental thereto or otherwise contemplated by Section 2.01(b) of the Basic Agreement, subject to the provisions of Section 4(a)(vi) of the NPA and Section 9.1(d) of the Intercreditor Agreement, and (iii) Enter into one or more agreements supplemental to the Agreement to provide for the formation of one or more Refinancing Trusts, the issuance of Refinancing Certificates, the purchase by any Refinancing Trust of applicable Refinancing Equipment Notes and other matters incidental thereto or as otherwise contemplated by Section 2.01(b) of the Basic Agreement, subject to the provisions of Section 4(a)(vi) of the NPA and Section 9.1(c) of the Intercreditor Agreement.

  • Change Orders and Contract Amendments 33.1 The Procuring Entity may at any time order the Supplier through notice in accordance GCC Clause 8, to make changes within the general scope of the Contract in any one or more of the following: a) drawings, designs, or specifications, where Goods to be furnished under the Contract are to be specifically manufactured for the Procuring Entity; b) the method of shipment or packing; c) the place of delivery; and d) the Related Services to be provided by the Supplier. 33.2 If any such change causes an increase or decrease in the cost of, or the time required for, the Supplier's performance of any provisions under the Contract, an equitable adjustment shall be made in the Contract Price or in the Delivery/Completion Schedule, or both, and the Contract shall accordingly be amended. Any claims by the Supplier for adjustment under this Clause must be asserted within twenty-eight (28) days from the date of the Supplier's receipt of the Procuring Entity's change order. 33.3 Prices to be charged by the Supplier for any Related Services that might be needed but which were not included in the Contract shall be agreed upon in advance by the parties and shall not exceed the prevailing rates charged to other parties by the Supplier for similar services.

  • Project Delivery Order Procedures The TIPS Member having approved and signed an interlocal agreement, or other TIPS Membership document, may make a request of the awarded vendor under this Agreement when the TIPS Member has services that need to be undertaken. Notification may occur via phone, the web, email, fax, or in person. Upon notification of a pending request, the awarded vendor shall make contact with the TIPS Member as soon as possible, but must make contact with the TIPS Member within two working days. Scheduling of projects (if applicable) may be accomplished when the TIPS Member issues a Purchase Order and/or an Agreement or Contract that will serve as “the notice to proceed” as agreed by the Vendor and the TIPS Member. The period for the delivery order will include the mobilization, materials purchase, installation and delivery, design, weather, and site cleanup and inspection. No additional claims may be made for delays as a result of these items. When the tasks have been completed the awarded vendor shall notify the client and have the TIPS Member or a designated representative of the TIPS Member inspect the work for acceptance under the scope and terms in the Purchase Order and/or Agreement or Contract. The TIPS Member will issue in writing any corrective actions that are required. Upon completion of these items, the TIPS Member will issue a completion notice and final payment will be issued per the contractual requirements of the project with the TIPS Member. Any Construction contract prepared by the TIPS Member’s Legal Counsel may alter the terms of this subsection, “Scheduling of Projects”.

  • Auction Schedule; Method of Submission of Orders (a) The Funds and the Auction Agent shall conduct Auctions for each series of Preferred Shares in accordance with the schedule set forth below. Such schedule may be changed at any time by the Auction Agent with the consent of the Fund, which consent shall not be withheld unreasonably. The Auction Agent shall give notice of any such change to BD. Such notice shall be received prior to the first Auction Date on which any such change shall be effective. Time Event ---- ----- By 9:30 A.M. Auction Agent advises the Funds and the Broker-Dealers of the Maximum Rate as set forth in Section 3.2(a) hereof.

  • Order to Stop Work The Commission, may, by written order to Contractor/Vendor at any time, and without notice to any Surety, require Contractor/Vendor to stop all or any part of the work called for by this contract. This order shall be for a specified period not exceeding 90 days after the order is delivered to Contractor/Vendor, unless the parties agree to any further period. Any such order shall be identified specifically as a stop work order issued pursuant to this clause. Upon receipt of such an order, Contractor/Vendor shall forthwith comply with its terms and take all reasonable steps to minimize the occurrence of costs allocable to the work covered by the order during the period of work stoppage. Before the stop work order expires, or within any further period to which the parties shall have agreed, the Commission shall either: Cancel the stop work order; or, Terminate the work covered by such order as provided in the Termination for Default clause or the Termination for Convenience clause of this Contract.

  • Vendor Encouraging Members to bypass TIPS agreement Encouraging entities to purchase directly from the Vendor or through another agreement, when the Member has requested using the TIPS cooperative Agreement or price, and thereby bypassing the TIPS Agreement is a violation of the terms and conditions of this Agreement and will result in removal of the Vendor from the TIPS Program.

  • Attachment C, Standard State Provisions for Contracts and Grants Attachment C is hereby deleted in its entirety and replaced by the Attachment C December 15, 2017 attached to this Amendment. Child Support (Applicable to natural persons only; not applicable to corporations, partnerships or LLCs). Contractor is under no obligation to pay child support or is in good standing with respect to or in full compliance with a plan to pay any and all child support payable under a support order as of the date of this amendment.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!