Design Verification and Control Sample Clauses

Design Verification and Control. Contractor deliverables shall: · Be presented in a manner that enables traceability to the Basis of Design; and · Be checked (including inter-discipline checks where appropriate) and approved by authorized personnel of Contractor independent of the deliverable’s originator
AutoNDA by SimpleDocs

Related to Design Verification and Control

  • E-Verification The Vendor represents and warrants that it will ensure its compliance with the Mississippi Employment Protection Act of 2008, and will register and participate in the status verification system for all newly hired employees. Mississippi Code Annotated §§71-11-1 et seq. The term “employee” as used herein means any person that is hired to perform work within the State of Mississippi. As used herein, “status verification system” means the Illegal Immigration Reform and Immigration Responsibility Act of 1996 that is operated by the United States Department of Homeland Security, also known as the E-Verify Program, or any other successor electronic verification system replacing the E-Verify Program. Vendor agrees to maintain records of such compliance. Upon request of the State and after approval of the Social Security Administration or Department of Homeland Security when required, Vendor agrees to provide a copy of each such verification. Vendor further represents and warrants that any person assigned to perform services hereafter meets the employment eligibility requirements of all immigration laws. The breach of this agreement may subject Vendor to the following: termination of this contract for goods or services and ineligibility for any state or public contract in Mississippi for up to three (3) years with notice of such cancellation/termination being made public; the loss of any license, permit, certification, or other document granted to Vendor by an agency, department or governmental entity for the right to do business in Mississippi for up to one (1) year; or,

  • Inspection and Verification The Secured Parties and such persons as the Secured Parties may reasonably designate shall have the right to inspect the Collateral, all records related thereto (and to make extracts and copies from such records) and the premises upon which any of the Collateral is located, to discuss the Grantor’s affairs with the officers of the Grantor and its independent accountants and to verify under reasonable procedures the validity, amount, quality, quantity, value, condition and status of, or any other matter relating to, the Collateral, including, in the case of collateral in the possession of any third Person, by contacting any account debtor or third Person possessing such Collateral for the purpose of making such a verification. Out-of-pocket expenses in connection with any inspections by representatives of the Secured Parties shall be (a) the obligations of the Grantor with respect to any inspection after the Secured Parties’ demand payment of the Notes or (b) the obligation of the Secured Parties in any other case.

  • Medical Verification The Town may require medical verification of an employee’s absence if the Town perceives the employee is abusing sick leave or has used an excessive amount of sick leave. The Town may require medical verification of an employee’s absence to verify that the employee is able to return to work with or without restrictions.

  • Third Party Verification 4.8.1 The SPD shall be further required to provide entry to the site of the Power Project free of all encumbrances at all times during the Term of the Agreement to SECI and a third Party nominated by any Indian Governmental Instrumentality for inspection and verification of the works being carried out by the SPD at the site of the Power Project. 4.8.2 The third party may verify the construction works/operation of the Power Project being carried out by the SPD and if it is found that the construction works/operation of the Power Project is not as per the Prudent Utility Practices, it may seek clarifications from SPD or require the works to be stopped or to comply with the instructions of such third party.

  • Search, Enquiry, Investigation, Examination And Verification a. The Property is sold on an “as is where is basis” subject to all the necessary inspection, search (including but not limited to the status of title), enquiry (including but not limited to the terms of consent to transfer and/or assignment and outstanding charges), investigation, examination and verification of which the Purchaser is already advised to conduct prior to the auction and which the Purchaser warrants to the Assignee has been conducted by the Purchaser’s independent legal advisors at the time of execution of the Memorandum. b. The intending bidder or the Purchaser is responsible at own costs and expenses to make and shall be deemed to have carried out own search, enquiry, investigation, examination and verification on all liabilities and encumbrances affecting the Property, the title particulars as well as the accuracy and correctness of the particulars and information provided. c. The Purchaser shall be deemed to purchase the Property in all respects subject thereto and shall also be deemed to have full knowledge of the state and condition of the Property regardless of whether or not the said search, enquiry, investigation, examination and verification have been conducted. d. The Purchaser shall be deemed to have read, understood and accepted these Conditions of Sale prior to the auction and to have knowledge of all matters which would have been disclosed thereby and the Purchaser expressly warrants to the Assignee that the Purchaser has sought independent legal advice on all matters pertaining to this sale and has been advised by his/her/its independent legal advisor of the effect of all the Conditions of Sale. e. Neither the Assignee nor the Auctioneer shall be required or bound to inform the Purchaser of any such matters whether known to them or not and the Purchaser shall raise no enquiry, requisition or objection thereon or thereto.

  • Quality control system (i) The Contractor shall establish a quality control mechanism to ensure compliance with the provisions of this Agreement (the “Quality Assurance Plan” or “QAP”). (ii) The Contractor shall, within 30 (thirty) days of the Appointed Date, submit to the Authority’s Engineer its Quality Assurance Plan which shall include the following: (a) organisation, duties and responsibilities, procedures, inspections and documentation; (b) quality control mechanism including sampling and testing of Materials, test frequencies, standards, acceptance criteria, testing facilities, reporting, recording and interpretation of test results, approvals, check list for site activities, and proforma for testing and calibration in accordance with the Specifications for Road and Bridge Works issued by MORTH, relevant IRC specifications and Good Industry Practice; and (c) internal quality audit system. The Authority’s Engineer shall convey its approval to the Contractor within a period of 21 (twenty-one) days of receipt of the QAP stating the modifications, if any, required, and the Contractor shall incorporate those in the QAP to the extent required for conforming with the provisions of this Clause 11.2. (iii) The Contractor shall procure all documents, apparatus and instruments, fuel, consumables, water, electricity, labour, Materials, samples, and qualified personnel as are necessary for examining and testing the Project Assets and workmanship in accordance with the Quality Assurance Plan. (iv) The cost of testing of Construction, Materials and workmanship under this Article 11 shall be borne by the Contractor.

  • Contract Monitoring The criminal background checks required by this rule shall be national in scope, and must be conducted at least once every three (3) years. Contractor shall make the criminal background checks required by Paragraph IV.G.1 available for inspection and copying by DRS personnel upon request of DRS.

  • Identity Verification In the case that the Subscriber provides telecommunication services to any Subscriber’s Customers pursuant to Section 8.1, the Subscriber is responsible for performing and shall perform personal identification of Subscriber’s Customer. SORACOM shall not bear any responsibility in relation to dealing with such matters.

  • Procurement of Small Works Works estimated to cost $250,000 equivalent or less per contract, up to an aggregate amount not to exceed $800,000 equivalent, may be procured under lump-sum, fixed-price contracts awarded on the basis of quotations obtained from three (3) qualified domestic contractors in response to a written invitation. The invitation shall include a detailed description of the works, including basic specifications, the required completion date, a basic form of agreement acceptable to the Bank, and relevant drawings, where applicable. The award shall be made to the contractor who offers the lowest price quotation for the required work, and who has the experience and resources to complete the contract successfully. Part D: Review by the Bank of Procurement Decisions

  • Electronic Visit Verification ("EVV A. To ensure: 1. the EVV system is used to verify the provision of services governed under 40 TAC, Chapter 68 or its successor; 2. only authorized people access the Contractor's EVV account; 3. all data elements required by HHSC or HHSC's designee are uploaded or entered and maintained in the EVV system completely, accurately, and prior to submitting the claim; 4. that each time services governed by 40 TAC Chapter 68 or its successor are delivered to an individual, the Contractor's staff uses an HHSC-approved EVV system; and 5. service delivery documentation is immediately available for review by HHSC when requested. B. Equipment provided to Contractor by HHSC, HHSC’s designee, or an HHSC-approved EVV vendor, must be returned in good condition when the equipment is no longer needed under this Contract. In the context of this agreement, “good condition” means Contractor must not place any marks or identifying information on the equipment and may not alter information on the equipment including logos and serial numbers. If the equipment is lost, stolen, marked, altered or damaged by Contractor, Contractor may be required to pay the replacement cost for each piece of equipment that is lost, stolen, marked or damaged. Replacement costs for lost, stolen, marked or damaged equipment may be assessed periodically. If Contractor recovers previously lost or stolen equipment for which Contractor paid the replacement cost in the prior 12 months, Contractor may return the equipment and be reimbursed for the replacement costs within 12 months of the date HHSC, HHSC’s designee or an HHSC-approved EVV vendor (as applicable) received payment in full from the Contractor. This is provided the equipment is returned in good condition as specified above. C. HHSC may perform EVV compliance oversight reviews to determine if Contractor has complied with EVV compliance requirements as outlined in 40 TAC Chapter 68 or its successor, EVV Policy posted on the HHSC EVV website or EVV Policy Handbook. D. If the Contractor determines an electronic record in the EVV system needs to be adjusted at any time, the Contractor will make the adjustment in the EVV system using the most appropriate EVV reason code number(s), EVV reason code description(s) and enter any required free text when completing visit maintenance in the EVV system, if applicable. E. Contractor must begin using an HHSC-approved EVV system prior to submitting an EVV relevant claim. F. All claims for services required to use EVV (EVV claims) must match to an accepted EVV visit transaction in the EVV Aggregator (the state’s centralized EVV database) prior to reimbursement of an EVV claim. Without a matching accepted EVV visit transaction, the claim will be denied. G. Contractor must submit all EVV related claims through the Texas Medicaid Claims Administrator, or as otherwise described in the EVV Policy posted on the HHSC EVV website or in the EVV Policy Handbook. H. Contractor must complete all required EVV training as outlined in the EVV Policy posted on the HHSC EVV website or EVV Policy Handbook: • Prior to using either an EVV vendor system or an EVV proprietary system and • Yearly thereafter. I. Contractor and, if applicable, the Contractor’s appointed EVV system administrator, must complete, sign and date the EVV Onboarding Form as outlined in 40 TAC Chapter 68 or its successor, EVV Policy posted on the HHSC website or EVV Policy Handbook.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!