Determining the LNG temperature and the gas phase temperature Sample Clauses

Determining the LNG temperature and the gas phase temperature. Each of the Vessel's tanks must be equipped with temperature sensors placed in such a way that at all times at least one sensor is located in the liquid and one in the gas phase, with the other sensors distributed at regular intervals from the top to the bottom of the tank. The temperature of the LNG before the Unloading or Reloading operations is determined by calculating the arithmetic mean of the measurements from the temperature sensors immersed in the liquid. The temperature of the gas phase after the Unloading or Reloading operations is determined by calculating the arithmetic mean of the measurements from the temperature sensors located above the liquid phase. The overall temperature measurement error, including the temperature measurement system element errors, must not exceed the values in the following table in accordance with standard ISO 8310. overall error of the measuring system
Sample 1Sample 2
AutoNDA by SimpleDocs
Determining the LNG temperature and the gas phase temperature. Each of the Vessel's tanks must be equipped with temperature sensors placed in such a way that at all times at least one sensor is located in the liquid and one in the gas phase, with the other sensors distributed at regular intervals from the top to the bottom of the tank. Only the measurements in the tanks concerned by the Cargo Transfer are taken into account. The temperature of the LNG before the Cargo Transfer is determined by calculating the arithmetic mean of all the measurements from the temperature sensors immersed in the liquid. The temperature of the gas phase after the Cargo Transfer is determined by calculating the arithmetic mean of all the measurements from the temperature sensors located above the liquid phase. The overall temperature measurement error, including the temperature measurement system element errors, must not exceed the values in the following table in accordance with standard ISO 8310. overall error of the measuring system
Sample 1

Related to Determining the LNG temperature and the gas phase temperature

  • Temperature Where low temperature and/or self-service cases are used for any of such merchandise coming under the jurisdiction of the Union, such cases shall be served only by employees covered by this Agreement.

  • Quality Specifications SANMINA-SCI shall comply with the quality specifications set forth in its Quality Manual, incorporated by reference herein, a copy of which is available from SANMINA-SCI upon request.

  • Placement of EPP probes Probes for measuring EPP parameters shall be placed inside or close to Registrars points of access to the Internet across the different geographic regions; care shall be taken not to deploy probes behind high propagation-­‐delay links, such as satellite links.

  • DAF Specifications Developer shall submit initial specifications for the DAF, including System Protection Facilities, to Connecting Transmission Owner and NYISO at least one hundred eighty (180) Calendar Days prior to the Initial Synchronization Date; and final specifications for review and comment at least ninety (90) Calendar Days prior to the Initial Synchronization Date. Connecting Transmission Owner and NYISO shall review such specifications to ensure that the DAF are compatible with the technical specifications, operational control, and safety requirements of the Connecting Transmission Owner and NYISO and comment on such specifications within thirty (30) Calendar Days of Developer’s submission. All specifications provided hereunder shall be deemed to be Confidential Information.

  • Technical Specifications The Technical Specifications furnished on the CD are intended to establish the standards for quality, performance and technical requirements for all labor, workmanship, material, methods and equipment necessary to complete the Work. When specifications and drawings are provided or referenced by the County, these are to be considered part of the Scope of Work, and to be specifically documented in the Detailed Scope of Work. For convenience, the County supplied specifications, if any, and the Technical Specifications furnished on the CD.

  • Meters (a) You must allow safe and unhindered access to your premises for the purposes of reading and maintaining the meters (where relevant). (b) We will use our best endeavours to ensure that a meter reading is carried out as frequently as is needed to prepare your bills, consistently with the metering rules and in any event at least once every 12 months.

  • Metering The Interconnection Customer shall be responsible for the Connecting Transmission Owner’s reasonable and necessary cost for the purchase, installation, operation, maintenance, testing, repair, and replacement of metering and data acquisition equipment specified in Attachments 2 and 3 of this Agreement. The Interconnection Customer’s metering (and data acquisition, as required) equipment shall conform to applicable industry rules and Operating Requirements.

  • Heating, Ventilating and Air Conditioning General Office Area: The building shall be equipped with a combination heating, ventilation and air conditioning system. The system shall have ducted supply and return air. The space above the ceiling shall not be used as a supply or return plenum. The systems shall be sized in accordance with the

  • Delivery Points ‌ Project water made available to the Agency pursuant to Article 6 shall be delivered to the Agency by the State at the delivery structures established in accordance with Article 10.

  • Tenant’s Compliance With Landlord’s Fire and Casualty Insurance Tenant shall, at Tenant’s expense, comply with all insurance company requirements pertaining to the use of the Premises. If Tenant’s conduct or use of the Premises causes any increase in the premium for such insurance policies then Tenant shall reimburse Landlord for any such increase. Tenant, at Tenant’s expense, shall comply with all rules, orders, regulations or requirements of the American Insurance Association (formerly the National Board of Fire Underwriters) and with any similar body.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!