DIVISION C. Special Provisions In accordance with A21, the Sections, Subsections, and Items therein listed are attached and made a part hereof. The material is indexed by the numbering system used in Division B. The numbers after the C (that identifies material in this Division) indicates the Part, Section, Subsection, or Item of Division B that is being supplemented or modified by each particular provision included in this Division.
DIVISION C. ARBITRATION
DIVISION C. Special Provisions In accordance with A21, the Sections, Subsections, and Items therein listed are attached and made a part hereof. The material is indexed by the numbering system used in Division B. The numbers after the C (that identifies material in this Division) indicates the Part, Section, Subsection, or Item of Division B that is being supplemented or modified by each particular provision included in this Division. C2.11# – TIMBER SUBJECT TO AGREEMENT. (2/71) In addition, there is within Sale Area an unestimated quantity of: Species Product Cull Logs Combined Cull Logs Other softwood Subdivisions 2 and 3 Sawtimber that shall be Included Timber upon written agreement. C2.2# - MINIMUM PIECE SIZE FOR SAWTIMBER. (2/2009) Purchaser is not required to pay for or remove minimum sawtimber pieces as described in A2 if said pieces have a net scale of less than 20 board feet. SAMPLE C2.35# DESIGNATION OF TIMBER, CUTTING UNIT BOUNDARIES, AND SUBDIVISION/PAYMENT UNIT BOUNDARIES (6/2012) Trees are designated for cutting under B2.35 only if designated as shown in the Timber Designation table below. The boundaries of Subdivisions/Payment Units and Cutting Units are designated as shown in the Boundary Designation table below. Trees used for boundary designation are not to be cut. SPECIFICATIONS PURSUANT TO C2.35# - DESIGNATION OF TIMBER. CUTTING UNIT BOUNDARIES, AND SUBDIVISION/PAYMENT UNIT BOUNDARIES Timber Designation Table Subdivision/Area/ Payment Unit Tree Paint Color Designation or Specification Mandatory Subdivision 1 (Timber Subject to Agreement) Subdivisions 2 and 3 Blue Hazard Tree. Notwithstanding B2.32 all dead and unstable live trees which are leaning towards a road or are otherwise hazardous to a road, and are sufficiently tall to reach Purchaser's landings or the roadbed of National Forest System roads within Sale Area, shall be felled by Purchaser when Marked in the specified paint color above and below xxxxx height by Forest Service in advance of felling any other timber in the vicinity. Pieces meeting Utilization Standards from such dead and unstable live trees shall be removed unless Purchaser is notified in writing that removal would cause unacceptable damage to areas requiring special protection such as residual timber, roads, administrative sites, streamside management zones, and areas identified on Sale Area Map or on the ground. Mandatory Subdivision 1 (Timber Subject to Agreement) Subdivisions 2 and 3 Blue Individual Tree Mark. Individual tr...
DIVISION C. Special Provisions In accordance with A21, the Sections, Subsections, and Items therein listed are attached and made a part hereof. The material is indexed by the numbering system used in Division B. The numbers after the C (that identifies material in this Division) indicates the Part, Section, Subsection, or Item of Division B that is being supplemented or modified by each particular provision included in this Division. C2.21# – UTILIZATION, REMOVAL, AND AMOUNT PAYABLE FOR NON-SAWTIMBER. (5/2008) Notwithstanding B2.2, Purchaser is required to pay for, cut, and remove the Non-Sawtimber Products of Included Timber listed in A2 and those Non-Sawtimber Products listed in the following table, unless otherwise agreed. If Purchaser can sufficiently demonstrate that no market exists within the normal delivery distance for specific Non-Sawtimber Products, Forest Service and Purchaser may agree to alternate removal requirements of such Non- Sawtimber Products as specified in the alternate removal agreement. See Agreement Example. The agreement for alternate removal requirements shall be executed prior to removing any timber from the Unit(s) included in the agreement. Alternate removal requirements shall apply only to whole units and not to portions of units. All material meeting alternate removal specifications shall be cut and moved to locations designated in the agreement. Volumes of material with alternate removal requirements will be determined from the cruise report for the sale. SAMPLE Purchaser will be charged for the following:
DIVISION C. Special Provisions In accordance with A21, the Sections, Subsections, and Items therein listed are attached and made a part hereof. The material is indexed by the numbering system used in Division B. The numbers after the C (that identifies material in this Division) indicates the Part, Section, Subsection, or Item of Division B that is being supplemented or modified by each particular provision included in this Division. C2.11# - TIMBER SUBJECT TO AGREEMENT (02/1971) In addition, there is within Sale Area an unestimated quantity of: Species Product ZZC Grn Bio Cv that shall be Included Timber upon written agreement. C2.3# - RESERVE TREES (04/2004) Notwithstanding the designations for cutting under B2.31, B2.32, B2.33, or B2.34, live or dead wildlife, genetic, or bearing reserve trees or groups of reserve trees within such cutting units or clearings shall be left uncut. Reserve trees are identified by an orange paint band for Wildlife Trees, or an orange paint band with a 4"x4" metal sign signifying Genetic Tree or Bearing Tree and shall be protected in accordance with C6.32#. Units with reserve trees are shown on Sale Area Map. C2.35# (OPTION 1) - INDIVIDUAL TREE DESIGNATION (06/2008) All Cutting Units designated as DxD on the Sale Area Map; All standing and down WF, ES, AF, LP, PP, WL, and DF, with Diameter Breast Height (DBH) less than 21.0" not marked with orange paint above and below xxxxx height and meeting the attached designation description which meet the minimum tree diameter stated in A2 are designated for cutting. Additional timber to be cut, if any, will be designated for cutting in accordance with B2.37. Leave trees, Marked with orange , or identified by the description in the attached table are not to be cut, unless designated by the Forest Service. Sale Name: Shamrock (DxP) Page 142 Contract 2400-6,(6/06) DESCRIPTION PURSUANT TO C2.35# (OPTION 1) – INDIVIDUAL TREE DESIGNATION (06/2008) Unit Map Symbol Designated Species Less than Xxxxx Diameter (inches) Unit(s): 077, 089, 097, 098, 100, 101, 103, 116, 138, and 143 DxD WF 27.0 ES 26.0 AF, DF, LP, PP 25.0 WL 28.0 1/ DxD xxxxx diameter: Measured outside the bark at 6-inches above the ground, on the uphill side of the tree, with a diameter or retractable loggers tape set perpendicular to the bole of the tree. Sale Name: Shamrock (DxP) Page 142a Contract 2400-6, (6/06) C2.355# - DESIGNATION BY PRESCRIPTION (05/2015) Within Subdivision(s) or Cutting Unit(s) ALL , as shown on the Sale Area Map, t...
DIVISION C. Special Provisions In accordance with A21, the Sections, Subsections, and Items therein listed are attached and made a part hereof. The material is indexed by the numbering system used in Division B. The numbers after the C (that identifies material in this Division) indicates the Part, Section, Subsection, or Item of Division B that is being supplemented or modified by each particular provision included in this Division. C2.2# - UTILIZATION AND REMOVAL OF INCLUDED PRODUCTS (3/21). Unless otherwise agreed in writing, or as specified in C2.211# - Optional Removal of Non-sawtimber Products, Purchaser is required to pay for and remove the following products described in this provision and listed in A2 of the contract: Sawtimber is defined as:
DIVISION C. Special Provisions In accordance with A22, the Sections, Subsections, and Items therein listed are attached and made a part hereof. The material is indexed by the numbering system used in Division B. The numbers after the C (that identifies material in this Division) indicates the Part, Section, Subsection, or Item of Division B that is being supplemented or modified by each particular provision included in this Division. TRAFFIC CONTROL PLAN AND SPECIFICATIONS PURSUANT TO B(T)6.33 SAFETY Unless otherwise agreed in writing in accordance with B(T)6.33 Safety, the following measures are required to provide adequate warning of hazards for users of roads and trails adjacent to Purchaser's Operations. Part I. Signing and Other Warning Methods:
DIVISION C. Special Provisions In accordance with A21, the Sections, Subsections, and Items therein listed are attached and made a part hereof. The material is indexed by the numbering system used in Division B. The numbers after the C (that identifies material in this Division) indicates the Part, Section, Subsection, or Item of Division B that is being supplemented or modified by each particular provision included in this Division. Lost Mule SBA Timber Sale A22- List of Special Provisions C2.2# - UTILIZATION AND REMOVAL OF INCLUDED PRODUCTS (3/21). C2.358# – INDIVIDUAL TREES (LEAVE TREE MARKING) (7/20). C2.359# – INDIVIDUAL TREES (CUT TREE MARKING) (7/20). C3.34 – EMERGENCY RATE REDETERMINATION (6/22). C4.211 – DOWNPAYMENT (7/22). C4.212 – TEMPORARY REDUCTION OF DOWNPAYMENT (8/09). C4.213 – PERIODIC PAYMENT SCHEDULE (7/22). C4.3 – PAYMENT GUARANTEED BY XXXX. (8/21). C4.31 – BLANKET BOND. (8/21). C4.4 – PAYMENTS NOT RECEIVED (8/12). C5.102# – CONSTRUCTION OF TEMPORARY ROADS (2/97). C5.12# – USE OF ROADS BY PURCHASER (6/99). C5.13# – ROAD COMPLETION DATE (4/04). C5.210 – STAKING ERRORS BY PURCHASER (10/04). C5.219# – ENGINEERING (10/04). C5.31# – ROAD MAINTENANCE REQUIREMENTS (7/01). SPECIFICATION T-101 SURFACE BLADING SPECIFICATION T-103 DUST ABATEMENT SPECIFICATION T-108 SLIDE REMOVAL AND SLUMP REPAIR SPECIFICATION T-301 DITCH CLEANING SPECIFICATION T-310 MINOR DRAINAGE STRUCTURES SPECIFICATION T-507 CUTTING ROADSIDE VEGETATION SPECIFICATION T-618 MAJOR DRAINAGE STRUCTURES SPECIFICATION T-619 MISCELLANEOUS STRUCTURES SPECIFICATION T-710 TRAFFIC SERVICES C5.314# – DUST ABATEMENT TREATMENT (2/02). C5.314# – ATTACHMENT (2/02). C5.316 – SNOW REMOVAL (4/13). C5.32# – ROAD MAINTENANCE DEPOSIT SCHEDULE (8/12). C5.41# – CLOSURE TO USE BY OTHERS (3/07). C6.10 – PREWORK CONFERENCE (10/04).
DIVISION C. Special Provisions In accordance with A21, the Sections, Subsections, and Items therein listed are attached and made a part hereof. The material is indexed by the numbering system used in Division B. The numbers after the C (that identifies material in this Division) indicates the Part, Section, Subsection, or Item of Division B that is being supplemented or modified by each particular provision included in this Division. C2.11# - TIMBER SUBJECT TO AGREEMENT (02/1971) In addition, there is within Sale Area an unestimated quantity of: Species Product Green Bio Cv. Grn Bio Cv that shall be Included Timber upon written agreement. C2.30# - CUTTING UNIT BOUNDARIES (02/2021) Notwithstanding B2.3, the boundaries of cutting units, or portions of cutting units, are identified as shown on the Cutting Unit Boundary Designation Table below and the Sale Area Map. Cutting Unit Boundary Designation Table Marked boundary trees shall not be cut. Discernable Boundaries are boundary locations that are readily identifiable features on the ground in locations shown on the Sale Area Map. A Geo-Fence is a location on the ground corresponding to the boundary location shown on a mobile mapping device using a Global Positioning System (GPS) Receiver using the digital vector file/shapefile named LLBB_SaleMap_VirtualBoundaries and dated 04/04/2022 . The digital vector file/shapefile will be provided to the Purchaser by the Forest Service. A digital list of the coordinates can be provided upon request. Included Timber is located within and not past the boundary as shown on the mobile mapping device using the digital vector file/shapefile listed above. Purchaser is responsible for obtaining a GPS receiver(s) that is capable of determining the location of the true Geo-Fence within the contract tolerance. Allowable contract tolerance is 40 feet. Forest Service inspection of cutting Included Timber to determine if cutting is within allowable contract tolerance, shall use the digital vector file/shapefile named and dated above using a GPS Receiver with a minimum, tested accuracy in a Light-Medium canopy of 20 feet. National Technology Development Program GPS Receiver accuracy reports by GPS manufacturer and model are available at: xxxxx://xxx.xx.xxx.xx/database/gps/mtdcrept/accuracy/index.htm. Forest Service determination of boundary location will be final. As an operational convenience and subject to written agreement by the Forest Service, in advance of marking, Purchaser may mark Geo-Fe...
DIVISION C. Special Provisions In accordance with A21, the Sections, Subsections, and Items therein listed are attached and made a part hereof. The material is indexed by the numbering system used in Division B. The numbers after the C (that identifies material in this Division) indicates the Part, Section, Subsection, or Item of Division B that is being supplemented or modified by each particular provision included in this Division. C2.11# – TIMBER SUBJECT TO AGREEMENT (2/71). In addition, there is within Sale Area an unestimated quantity of Non-sawtimber that shall be Included Timber upon written agreement. C2.2# - UTILIZATION AND REMOVAL OF INCLUDED PRODUCTS (4/03). Unless otherwise agreed in writing, or as specified in C2.211# - Optional Removal of Non-sawtimber Products, Purchaser is required to pay for and remove the following products described in A2 of the contract: Sawtimber is the xxxxx of trees meeting Sawtimber Product specifications as listed in A2 of the contract. Non-sawtimber is the xxxxx of trees meeting Non-sawtimber Product specifications as listed in A2 of the contract, but that do not meet the minimum piece specifications for Sawtimber Products. Non-sawtimber removal is only required in Cutting Units N/A. Only the volume of non-sawtimber in the cutting units listed above is included in the estimated volume shown in A2. If the purchaser and the Forest Service agree to remove non-sawtimber from cutting units other than those listed above this non-sawtimber must be measured and paid for at the rates shown in A4. C2.38# - SPECIES DESIGNATION (08/1/2018). Within the cutting units shown below, listed species are designated for cutting when they (a) meet utilization standards and (b) are smaller than the xxxxx diameter listed below and shown on the Sale Area Map: Unit Designated Species Maximum Xxxxx Diameter – (Inches) All Units Cedar, Xxxxxxx-fir, Grand fir, Hemlock, Western larch, Lodgepole pine, Spruce, White pine. N/A Xxxxx diameter will be measured at N/A inches above ground level on the uphill side of the tree. A minimum xxxxx height of N/A inches above ground level on the uphill side shall be left in the units listed above. In addition, any trees within the cutting unit boundary that are wind thrown prior to Purchaser's logging in the immediate vicinity which meet Utilization Standards in amounts less than specified in B2.133 are designated for cutting. In addition, all decked Cedar, Xxxxxxx fir, Grand fir, Hemlock, Western larch, Lodgepole pine,...
