Apportionment, Application and Reversal of Payments Principal and interest payments shall be apportioned ratably among the Lenders (according to the unpaid principal balance of the Loans to which such payments relate held by each Lender) and payments of the fees shall, as applicable, be apportioned ratably among the Lenders. All payments shall be remitted to the Agent and all such payments not relating to principal or interest of specific Loans, or not constituting payment of specific fees, and all proceeds of Accounts or other Collateral received by the Agent, shall be applied, ratably, subject to the provisions of this Agreement, first, to pay any fees, indemnities or expense reimbursements then due to the Agent from the Borrower; second, to pay any fees or expense reimbursements then due to the Lenders from the Borrower; third, to pay interest due in respect of all Revolving Loans, including Non-Ratable Loans and Protective Advances; fourth, to pay or prepay principal of the Non-Ratable Loans and Protective Advances; fifth, to pay or prepay principal of the Revolving Loans (other than Non-Ratable Loans and Protective Advances) and sixth, to the payment of any other Obligation including any amounts relating to Bank Products due to the Agent or any Lender or any of their Affiliates by the Borrower. Notwithstanding anything to the contrary contained in this Agreement, unless so directed by the Borrower, or unless an Event of Default has occurred and is continuing, neither the Agent nor any Lender shall apply any payments which it receives to any LIBOR Revolving Loan, except (a) on the expiration date of the Interest Period applicable to any such LIBOR Rate Loan, or (b) in the event, and only to the extent, that there are no outstanding Base Rate Revolving Loans. The Agent shall promptly distribute to each Lender, pursuant to the applicable wire transfer instructions received from each Lender in writing, such funds as it may be entitled to receive, subject to a Settlement delay as provided for in Section 2.2(j). The Agent and the Lenders shall have the continuing and exclusive right to apply and reverse and reapply any and all such proceeds and payments to any portion of the Obligations.
Patent Applications It is understood by the parties that, pursuant to the Baylor Technology Transfer Agreement, MAS has the initial responsibility for filing, prosecution and maintenance of Patents and Patent Applications covering the Baylor Technology. The parties agree that, as between MAS and CTI, MAS shall be responsible for deciding whether and how to file, prosecute and maintain the Patents and Patent Applications, provided that:
(a) all decisions of MAS (whether substantive or procedural) concerning whether and how to file, prosecute and/or maintain any Patents and Patent Applications shall be acceptable to CTI, such acceptance not to be unreasonably withheld;
(b) with respect to any action permitted under Section 5.5 of the Baylor Technology Transfer Agreement or Section 5.5 of this Agreement, MAS will use legal counsel reasonably acceptable to CTI;
(c) MAS will provide CTI with (i) drafts of all filings relating to the Patents and Patent Applications and (ii) drafts of all correspondence to be sent by MAS to Baylor, the Patent and Trademark Office (the “PTO”) or any third party relating to the Patents and Patent Applications. Final versions of all such filings and correspondence shall be acceptable to CTI, such acceptance not to be unreasonably withheld;
(d) MAS will promptly provide CTI with copies of any notices and other correspondence received by CTI from Baylor, the PTO or any other third party relating to the Patents and Patent Applications, including, but not limited to, any notices received by MAS pursuant to Section 5.5 of the Baylor Technology Transfer Agreement;
(e) MAS will, if requested by CTI, provide notice to Baylor under any of the circumstances permitting notice pursuant to Section 5.5 of the Baylor Technology Transfer Agreement;
(f) MAS agrees to cooperate with CTI to whatever extent is reasonably necessary to procure patent protection of any rights regarding the Licensed Technology and agrees to execute any and all documents to give CTI the full benefit of the sublicenses and licenses granted herein;
(g) MAS represents and warrants that, as of the Effective Date, it has not received any notices from Baylor pursuant to Section 5.5(c) or Section 5.5(d) of the Baylor Technology Transfer Agreement. In the event MAS receives any notices from Baylor pursuant to Section 5.5(c) or Section 5.5(d) of the Baylor Technology Transfer Agreement after the Effective Date. MAS will provide a copy of such notice to CTI within five (5) business days of receipt of such notice by MAS. MAS will then take all actions requested by CTI to allow CTI to retain its rights granted under this Agreement, including, but not limited to, promptly notifying Baylor in the event CTI wishes MAS to proceed with any actions in connection with the Patents or Patent Applications.
Provisional Application Upon signature of this Compact, and until this Compact has entered into force in accordance with Section 7.3, the Parties will provisionally apply the terms of this Compact; provided that, no MCC Funding, other than Compact Implementation Funding, will be made available or disbursed before this Compact enters into force.
Application for Payment The form acceptable to Owner that is to be used by the Contractor during the course of the Work in requesting payment from the Owner and that is to be accompanied by such supporting documentation as is required by the Contract Documents.
Application Form To apply for a pole attachment or conduit occupancy license under this Agreement, Applicant shall submit to SWBT two signed copies of the appropriate application forms. SWBT represents that the forms specified in subsections (a)-(b) are forms in use prior to the effective date of this Agreement and that SWBT is in the process of revising such forms to conform to the provisions of this Agreement and to streamline the application process. The parties therefore agree that the forms specified in subsections (a) and (b) will be interim forms only. SWBT reserves the right to change the format and content of these forms upon 60 days written notice to Applicant.
(a) To apply for a pole attachment license, Applicant shall submit to SWBT two signed copies of SWBT’s Form SW-9434 (“Access Application and Make- Ready Authorization”) together with completed Form SW-9433 (“Pole Attachments”). An application for a pole attachment license will not be complete or subject to processing by SWBT until these forms have been submitted to SWBT; provided, however, that such forms will be deemed to be substantially complete if they contain the information specified in subsections (c)-(h) below, as applicable. Copies of Forms SW-9433 and SW-9434 are attached to this Agreement as parts of APPENDIX III.
(b) To apply for a conduit occupancy license, Applicant shall submit to SWBT two signed copies of SWBT’s Form SW-9434 (“Access Application and Make-Ready Authorization”) together with completed Form SW-9435 (“Conduit Occupancy”). An application for a conduit occupancy license will not be complete or subject to processing by SWBT until these forms have been submitted to SWBT; provided, however, that such forms will be deemed to be substantially complete if they contain the information specified in subsections (c)-(h) below, as applicable. Copies of Forms SW-9434 and SW-9435 are attached to this Agreement as parts of APPENDIX III.
(c) Each application for a license under this Agreement shall include, at a minimum, the following information:
(1) the poles, ducts, and conduits (including all manholes) along Applicant’s proposed route to or within which Applicant desires to attach or place its facilities;
(2) a description of the facilities to be attached to SWBT’s poles and a description of the facilities to be placed within each component of SWBT’s conduit system (including but not limited to ducts, conduits, manholes, and handholes) along the proposed route;
(3) for poles, the proposed points of attachment;
(4) for building entrance or building distribution ducts or conduits or other space within a building, a conspicuous statement, as required by Section 5.06 of this Agreement, that the application pertains to a building entrance or building distribution duct or conduit or other space within a building;
(5) if applicable, a conspicuous notation that the space requested is not to be assigned (or billed) to Applicant until SWBT has received Applicant’s written instruction to make such assignment or issued a license authorizing Applicant to occupy the space requested; and
(6) if applicable, a conspicuous statement that Applicant intends to occupy the space before the issuance of a license, as provided in Section 8.03 of this Agreement.
(d) Facilities descriptions which apply to multiple pole attachments or conduit occupancies need only be described once on any form. Facilities descriptions shall include, at a minimum, the following information:
(1) the number and types of cables, including the physical size (diameter) and weight (weight per foot);
(2) the number and types of strands, if any, which will be used to support the cables, including the rated holding capacity expressed in thousand pound increments (e.g., 2.2M) of such strands; and
(3) sufficient information to identify and describe the physical characteristics (size, dimensions, and weight) of apparatus enclosures and other facilities to be attached to SWBT’s poles or placed in SWBT’s conduit system.
(e) When it appears to Applicant that facilities modification, capacity expansion, or make-ready work may be required to accommodate Applicant’s access requests, Applicant shall describe the facilities modification, capacity expansion, or make-ready work which Applicant proposes. Applicant shall also describe its plans, if any, to use any infrequent construction technique or connectivity solution authorized under Section 6.03 to avoid high or unusual expenditures and state its reasons for the use of such technique or solution.
(f) Applicant acknowledges that the poles along a particular pole line or route may include poles owned by firms (such as electric utilities) other than SWBT, that it may be necessary for SWBT to rearrange its facilities or perform other make-ready work on poles other than poles it owns or controls in order to accommodate Applicant’s request for access to SWBT’s poles and that, at the time an application is submitted, it may be difficult for Applicant to determine with certainty whether a particular pole is owned or controlled by SWBT or by another entity. Accordingly, the application shall, to the extent feasible, identify all poles utilized by SWBT (without regard to ownership) along Applicant’s proposed route.
(g) Each application for a license under this Agreement shall be accompanied by a construction schedule showing Applicant’s projected dates for beginning and completing construction at the sites specified in the application. Information on this schedule may be used by SWBT’s engineering and outside plant construction personnel in scheduling work required to process Applicant’s applications and scheduling such capacity expansions, make- ready work, and facilities modifications, if any, as may be necessary to accommodate Applicant’s facilities.
(h) Applicant may include multiple cables in a single license application and may provide multiple services (e.g., CATV and non-CATV services) under the same cable sheath or jacket. When both CATV and non-CATV services are provided under the same cable sheath or jacket, or CATV and non-CATV services are provided using different cables attached or lashed to the same strand or otherwise occupying the same space on a pole or the same duct or inner duct within a conduit, Applicant will so advise SWBT and SWBT shall, if permitted by law, adjust its charges to enable SWBT to charge Applicant the rate applicable to telecommunications carriers rather than the rate applicable to cable television systems solely to provide cable service.
Paid Claims without Supporting Documentation Any Paid Claim for which Xxxxxxx cannot produce documentation shall be considered an error and the total reimbursement received by Xxxxxxx for such Paid Claim shall be deemed an Overpayment. Replacement sampling for Paid Claims with missing documentation is not permitted.
Application Process The employees wishing to enter into a job share arrangement will apply in writing to the Employer and forward a copy to the Union outlining the proposed commencement date of the job share, how the hours and days of work will be shared and how communication and continuity of work will be maintained. The Employer shall communicate a decision on a job share request in writing to the applicants. Applications to Job Sharing shall not be unreasonably denied.
Notice, Application In the case of any Loan, the Administrative Agent shall have received a Notice of Borrowing and, in the case of any Issuance of any Letter of Credit, the Issuing Lender and the Administrative Agent shall have received an L/C Application or L/C Amendment Application, as required under Section 3.2.
Applications for Payment 9.3.1 At least ten days before the date for each progress payment established in the State- Contractor Agreement, the Contractor shall submit to the Architect an itemized Application for Payment, notarized if required, supported by such data substantiating the Contractor's right to payment as the State or the Architect may require. The application for payment must, at a minimum, reflect retainage and the required waivers of lien and any other support documentation enumerated elsewhere in the Contract Documents.
9.3.2 Unless otherwise provided in the Contract Documents, payments will be made on account of materials or equipment not incorporated in the Work but delivered and suitably stored at the site and, if approved in advance by the State, payments may similarly be made for materials or equipment suitably stored at some other location agreed upon in writing. Payments for materials or equipment stored on or off the site shall be conditioned upon submission by the Contractor of bills of sale or such other procedures satisfactory to the State to establish the State's title to such materials or equipment or otherwise protect the State's interest, including applicable insurance and transportation to the site for those materials and equipment stored off the site.
9.3.3 The Contractor warrants that title to all Work, materials and equipment covered by an Application for Payment will pass to the State either by incorporation in the construction or upon the receipt of payment by the Contractor, whichever occurs first, free and clear of all liens, claims, security interests or encumbrances, hereinafter referred to in this Article 9 as "liens"; and that no Work, materials or equipment covered by an Application for Payment will have been acquired by the Contractor, or by any other person performing Work at the site or furnishing materials and equipment for the Project, subject to an agreement under which an interest therein or an encumbrance thereon is retained by the seller or otherwise imposed by the Contractor or such other person.
Application to Repayment Amounts (i) Subject to clause (ii) of this Section 5.2(c), the first proviso to Section 5.2(a)(i) and the first proviso to Section 5.2(a)(ii), (A) each prepayment of Term Loans required by Sections 5.2(a)(i) and (ii) (other than in connection with a Debt Incurrence Prepayment Event) shall be allocated to the Classes of Term Loans outstanding, pro rata, based upon the applicable remaining Repayment Amounts due in respect of each such Class of Term Loans (excluding any Class of Term Loans that has agreed to receive a less than pro rata share of any such mandatory prepayment and taking into account any reduction in the amount of any required Excess Cash Flow payment to any Class of Term Loans that have been subject to a Section 13.6(g) transaction), shall be applied pro rata to Lenders within each Class, based upon the outstanding principal amounts owing to each such Lender under each such Class of Term Loans and shall be applied to reduce such scheduled Repayment Amounts within each such Class in accordance with Section 5.2(d)(ii) and (B) each prepayment of Term Loans required by Section 5.2(a)(i) in connection with a Debt Incurrence Prepayment Event shall be allocated to any Class of Term Loans outstanding as directed by the Borrower (subject to the requirement that the proceeds of any Specified Debt Incurrence Prepayment Event shall in all cases be applied to prepay or repay the applicable Refinanced Indebtedness), shall be applied pro rata to Lenders within each such Class, based upon the outstanding principal amounts owing to each such Lender under each such Class of Term Loans and shall be applied to reduce such scheduled Repayment Amounts within each such Class in accordance with Section 5.2(d)(ii); provided that, with respect to the allocation of such prepayments under clause (A) above only, between an Existing Term Loan Class and Extended Term Loans of the same Extension Series, the Borrower may allocate such prepayments as the Borrower may specify, subject to the limitation that the Borrower shall not allocate to Extended Term Loans of any Extension Series any such mandatory prepayment under such clause (A) unless such prepayment is accompanied by at least a pro rata prepayment, based upon the applicable remaining Repayment Amounts due in respect thereof, of the Term Loans of the Existing Term Loan Class, if any, from which such Extended Term Loans were converted or exchanged (or such Term Loans of the Existing Term Loan Class have otherwise been repaid in full).
(ii) With respect to each such prepayment required by Section 5.2(a)(i) and Section 5.2(a)(ii) (other than any Debt Incurrence Prepayment Event), (A) the Borrower will, not later than the date specified in Section 5.2(a) for offering to make such prepayment, give the Administrative Agent, written notice requesting that the Administrative Agent provide notice of such prepayment to each Lender and the Administrative Agent will promptly provide such notice to each Lender, (B) other than if such prepayment arises due to a Specified Debt Incurrence Prepayment Event, each Lender of Term Loans will have the right to refuse any such prepayment by giving written notice of such refusal to the Administrative Agent and the Borrower within three Business Days after such Lender’s receipt of notice from the Administrative Agent of such prepayment, and to the extent any such prepayment is so refused, such amounts may be retained by the Borrower (the “Retained Refused Proceeds”) and (C) the Borrower will make all such prepayments not so refused upon the tenth Business Day after the Lender received first notice of repayment from the Administrative Agent.
