Drilling Motors Sample Clauses

Open Split View

Download

Share

Cite

Drilling Motors. Quantity 24 Type (AC/DC) AC Power of each 850 KW Total power 20,400 KW

Sample 1

Save

Copy

Related to Drilling Motors

• Wet Weather In the event of wet weather, work in the open will continue until the particular work in hand can no longer be done safely and efficiently. Whilst it is raining, employees will be required to: Continue to work under cover or relocate to alternative work under cover, on site. Obtain materials and services for employees working under cover where there is only minimal exposure to inclement weather. When required, perform emergency and safety work. In addition, work on unexpected breakdowns, which can be corrected in limited time duration. Should a portion of the project be affected by wet weather, all other employees not so affected shall continue working in accordance with award conditions, regardless that some employees may be entitled to cease work due to wet weather. If a halt to productive work occurs due to inclement weather, the parties agree that employees may be relocated to other unaffected sites. Where the above steps are not possible, affected employees may be required to attend tool box meetings, work planning sessions or skills development activities, all of which will count as productive time for payment purposes.

• STRS PICK-UP The Board agrees, as a condition of employment, to tax shelter employee contributions to the State Teacher's Retirement System (STRS) in accordance with State Retirement System and Federal Internal Revenue Service guidelines and restrictions. This section in no way implies that the Board will contribute any portion of the employee's share of retirement contributions. For purposes of this paragraph, total annual salary and salary per pay period of each bargaining unit member shall be the salary otherwise payable under this Agreement, as amended. The total annual salary and salary per pay period of each member shall be payable by the Board in two parts: (1) deferred salary and (2) cash salary. A member's deferred salary shall be equal to that percentage of said member's total annual salary or salary per pay period which is required from time to time by the State Teachers Retirement System (STRS) to be paid as an employee contribution by said member as a pickup of the STRS employee contribution otherwise payable by said member. A member's cash salary shall be equal to said member's total annual salary or salary per period less the amount of the pickup for said member and shall be payable, subject to applicable payroll deductions, to said member. The Board's total combined expenditures for members' total annual salaries otherwise payable under this Agreement, as amended, (including pickup amounts) and its employer contributions to STRS shall not be greater than the amounts it would have paid for those items had this provision not been in effect. The Board shall compute and remit its employer contributions to STRS based upon total annual salary, including the "pickup". The Board shall report for Federal and Ohio income tax purposes as a member's gross income said member's total annual salary less the amount of the "pickup". The Board shall report for municipal income tax purposes as a member's gross income said member's total annual salary, including the amount of the pickup. The pickup shall be included in the member's total annual salary for the purpose of computing daily rate of pay, for determining paid salary adjustments to be made due to absence, or for any other similar purpose. The pickup shall apply to all payroll payments made after the effective date of this provision. Should the Board's payment of deferred salary cause an individual bargaining unit member's annuity contributions to exceed the IRS permissible level, any such individual shall have the right to adjust annuity deductions within thirty (30) days of the effective date of this provision.

• Check Meters Developer, at its option and expense, may install and operate, on its premises and on its side of the Point of Interconnection, one or more check meters to check Connecting Transmission Owner’s meters. Such check meters shall be for check purposes only and shall not be used for the measurement of power flows for purposes of this Agreement, except as provided in Article 7.4 below. The check meters shall be subject at all reasonable times to inspection and examination by Connecting Transmission Owner or its designee. The installation, operation and maintenance thereof shall be performed entirely by Developer in accordance with Good Utility Practice.

• Two-Way Interconnection Trunks 2.4.1 Where the Parties have agreed to use Two-Way Interconnection Trunks for the exchange of traffic between Verizon and PCS, PCS shall order from Verizon, and Verizon shall provide, the Two-Way Interconnection Trunks and the Entrance Facility, on which such Trunks will ride, and transport and multiplexing, in accordance with the rates, terms and conditions set forth in this Agreement and Verizon’s applicable Tariffs. 2.4.2 Prior to ordering any Two-Way Interconnection Trunks from Verizon, PCS shall meet with Verizon to conduct a joint planning meeting (“Joint Planning Meeting”). At that Joint Planning Meeting, each Party shall provide to the other Party originating Centium Call Second (Hundred Call Second) information, and the Parties shall mutually agree on the appropriate initial number of Two-Way End Office and Tandem Interconnection Trunks and the interface specifications at the Point of Interconnection (POI). Where the Parties have agreed to convert existing One-Way Interconnection Trunks to Two-Way Interconnection Trunks, at the Joint Planning Meeting, the Parties shall also mutually agree on the conversion process and project intervals for conversion of such One-Way Interconnection Trunks to Two-Way Interconnection Trunks. 2.4.3 Two-Way Interconnection Trunks shall be from a Verizon End Office or Tandem to a mutually agreed upon POI. 2.4.4 On a semi-annual basis, PCS shall submit a good faith forecast to Verizon of the number of End Office and Tandem Two-Way Interconnection Trunks that PCS anticipates Verizon will need to provide during the ensuing two (2) year period to carry traffic from PCS to Verizon and from Verizon to PCS. PCS’s trunk forecasts shall conform to the Verizon CLEC trunk forecasting guidelines as in effect at that time. 2.4.5 The Parties shall meet (telephonically or in person) from time to time, as needed, to review data on End Office and Tandem Two-Way Interconnection Trunks to determine the need for new trunk groups and to plan any necessary changes in the number of Two-Way Interconnection Trunks. 2.4.6 Two-Way Interconnection Trunks shall have SS7 Common Channel Signaling. The Parties agree to utilize B8ZS and Extended Super Frame (ESF) DS1 facilities, where available. 2.4.7 With respect to End Office Two-Way Interconnection Trunks, both Parties shall use an economic Centium Call Second (Hundred Call Second) equal to five (5). 2.4.8 Two-Way Interconnection Trunk groups that connect to a Verizon access Tandem shall be engineered using a design blocking objective of Xxxx-Xxxxxxxxx B.005 during the average time consistent busy hour. Two-Way Interconnection Trunk groups that connect to a Verizon local Tandem shall be engineered using a design blocking objective of Xxxx-Xxxxxxxxx B.01 during the average time consistent busy hour. Verizon and PCS shall engineer Two-Way Interconnection Trunks using BOC Notes on the LEC Networks SR-TSV-002275. 2.4.9 The performance standard for final Two-Way Interconnection Trunk groups shall be that no such Interconnection Trunk group will exceed its design blocking objective (B.005 or B.01, as applicable) for three

• One-Way Interconnection Trunks 2.3.1 Where the Parties use One-Way Interconnection Trunks for the delivery of traffic from Onvoy to Frontier, Onvoy, at Xxxxx’s own expense, shall: 2.3.1.1 provide its own facilities for delivery of the traffic to the technically feasible Point(s) of Interconnection on Frontier’s network in a LATA; and/or 2.3.1.2 obtain transport for delivery of the traffic to the technically feasible Point(s) of Interconnection on Frontier’s network in a LATA (a) from a third party, or, (b) if Frontier offers such transport pursuant to a Frontier access Tariff, from Frontier. 2.3.2 For each Tandem or End Office One-Way Interconnection Trunk group for delivery of traffic from Onvoy to Frontier with a utilization level of less than sixty percent (60%) for final trunk groups and eighty-five percent (85%) for high usage trunk groups, unless the Parties agree otherwise, Onvoy will promptly submit ASRs to disconnect a sufficient number of Interconnection Trunks to attain a utilization level of approximately sixty percent (60%) for all final trunk groups and eighty-five percent (85%) for all high usage trunk groups. In the event Onvoy fails to submit an ASR to disconnect One-Way Interconnection Trunks as required by this Section, Frontier may disconnect the excess Interconnection Trunks or bill (and Onvoy shall pay) for the excess Interconnection Trunks at the rates set forth in the Pricing Attachment. 2.3.3 Where the Parties use One-Way Interconnection Trunks for the delivery of traffic from Frontier to Onvoy, Frontier, at Frontier’s own expense, shall provide its own facilities for delivery of the traffic to the technically feasible Point(s) of Interconnection on Frontier’s network in a LATA.

• Shift Rotation Routine shift rotation is not an approach to staffing endorsed by the Employer. Except for emergency situations where it may be necessary to provide safe patient care, shift rotation will not be utilized without mutual consent. If such an occasion should ever occur, volunteers will be sought first. If no one volunteers, the Employer will rotate shifts on an inverse seniority basis until the staff vacancies are filled.

• Pendahuluan Industri perbankan syari’ah di Indonesia tengah memasuki fase growth (pertumbuhan) xxx sangat membutuhkan kepercayaan xxx loyalitas masyarakat untuk terus meningkatkan produktivitasnya. Kepercayaan xxx loyalitas mutlak dibutuhkan untuk memasuki fase maturity perbankan syariah dalam menghadapi kompetisi global. Kepercayaan xxx loyalitas tidak dapat diperoleh tanpa adanya produk- produk yang mampu menjawab kebutuhan masyarakat. Produk bank syariah sudah semestinya mampu memenuhi seluruh komponen masyarakat, baik dalam produk funding, financing, xxx services. Oleh karenanya, inovasi produk bank syariah menjadi syarat mutlak sebagai indikator bahwa bank syariah mampu beradaptasi dengan kebutuhan manusia modern. Inovasi produk merupakan salah satu unsur penting untuk dapat menjaga sustainabilitas perusahaan. Inovasi produk merepresentasikan kemampuan perusahaan untuk dapat memenuhi kebutuhan pasar sekaligus sebagai upaya untuk memperoleh keuntungan perusahaan. Bank syariah pada dasarnya telah melakukan serangkaian upaya inovasi, salah satunya adalah dengan melakukan “rekayasa” (engineering) terhadap akad- akad dalam fiqh muamalah. Beberapa akad dalam fiqh muamalah tidak begitu saja diadopsi oleh perbankan syariah, namun juga “diadaptasikan” dengan kebutuhan masyarakat terhadap xxxx-xxxx perbankan. Rekayasa xxx adaptasi ini memang sebuah keniscayaan, karena jika adopsi dilakukan secara apa adanya maka produk bank syariah diragukan dapat memberikan manfaat yang tepat bagi masyarakat. Prinsip keleluasan bermuamalah dalam Islam merupakan modal utama untuk menghadapi kompleksitas permasalahan ekonomi serta besarnya tuntutan masyarakat akan peran perbankan syariah.1 Dalam rangka memenuhi kebutuhan masyarakat xxx mengembangkan industri perbankan xxx keuangan xxxx xxxx kompetitif, inovasi dalam berbisnis yang dilakukan oleh perbankan syariah melalui serangkaian adaptasi tersebut memang sudah menjadi tuntutan bisnis. Sebagai contoh dapat dikemukakan xxxxxx xxxx kartu kredit syariah, asuransi syariah, obligasi syariah, FX iB, xxx Islamic Swap. Produk-produk dalam kegiatan keuangan syariah tersebut mengandung beberapa akad. Sebagai contoh, dalam transaksi kartu kredit syariah terdapat akad ijarah, qardh, xxx kafalah. Obligasi syariah mengandung sekurang-kurangnya akad mudharabah (atau ijarah) xxx wakalah, serta terkadang disertai kafalah atau wa’d. Islamic swap mengandung beberapa kali akad tawarruq, bay‘, wakalah, xxxxx, xxx terkadang disertai wa’d.2 Dalam setiap transaksi, akad-akad tersebut dilakukan secara bersamaan atau setidak-tidaknya setiap akad yang terdapat dalam suatu produk tidak bisa ditinggalkan, karena kesemuanya merupakan satu kesatuan. Transaksi seperti 1 Xxxxxx Xxxxx Xxxxxx, “Konstruksi Akad dalam Pengembangan Produk Perbankan Syariah di Indonesia”, Al-‘Adalah, Vol. 12, No. 3 (Juni, 2015), 493. 2 Xxxxxxxxx Xxxxxxx, “Multiakad dalam Transaksi Syariah Kontemporer pada Lembaga Keuangan Syariah di Indonesia”, Al-Iqtishad, Vol. 3, No. 1 (Januari, 2011), 156. inilah yang dikenal dengan istilah multiakad (Indonesia) atau hybrid contract (Inggris) atau al-’uqud al-murakkabah (Arab). Hybrid contract merupakan perbincangan yang masih hangat dikalangan para cendikiawan muslim untuk menentukan keabsahan hukumnya. Pendapat pertama mengatakan hukumnya mubah berdasar kaidah fiqh al-ashlu fi al-mu’amalat al-ibahah (hukum asal muamalah adalah boleh). Pendapat kedua mengharamkan berdasarkan dengan hadits-hadits yang mengharamkan dua jual beli dalam satu jual beli (bai’ataini fi bai’atin), atau mengharamkan dua akad dalam satu akad (shafqatain fi shafqatin).3 Sebagai entitas bisnis yang menjadi bagian penting dalam sistem ekonomi syariah sebagai induknya, tentunya industri perbankan syariah tidak boleh keluar dari nilai-nilai syariah. Melakukan inovasi memang tuntutan bisnis, namun menjaga shariah compliance juga menjadi kewajiban bagi setiap pelaku bisnis syariah, tidak terkecuali perbankan syariah. Profit-oriented hanya boleh dijadikan sebagai media (tool) untuk mencapai tujuan (goal), yaitu benefit-oriented. Produk bank syari’ah seyogyanya memiliki multi benefit, yaitu: material benefit, emotional benefit, xxx spiritual benefit.4 Mengacu pada kondisi tersebut, maka inovasi produk perbankan syariah setidaknya memerhatikan inovasi dalam dua dimensi, yaitu dimensi ekonomi xxx dimensi sosial. Inovasi dalam dimensi ekonomi artinya bahwa produk perbankan syariah harus mampu menghadirkan produk yang sesuai dengan kebutuhan masyarakat, sehingga bank syariah menjadi pilihan utama masyarakat. Jika hal ini dapat dilakukan, maka fungsi-fungsi bank syariah akan mampu memainkan perannya sebagai intermediary institution. Pada dimensi sosial, sebagai produsen jasa keuangan syariah, bank syariah bertanggung jawab untuk melakukan edukasi terhadap perilaku masyarakat. Bank syariah xxx masyarakat xxxxxx melekat xxx memengaruhi satu dengan yang lain. Pada satu sisi, bank syariah melalui pola inovasinya harus mampu “men-syariah- kan” perilaku masyarakat, khususnya yang berhubungan dengan lembaga 3 Najamuddin, “Al-‘Uqud Al-Murakkabah dalam Perspektif Ekonomi Syariah”, Jurnal Syariah, Vol. 2, No. 2 (Oktober, 2013), 6.

• Complete Portfolio Holdings From Shareholder Reports Containing a Summary Schedule of Investments; and

• Clearcutting Units All trees that meet Utilization Standards within “Clearcutting Units” are designated for cutting.

• Welding Welding and use of cutting torches or cutoff saws will be permitted only in areas that have been cleared or are free of all material capable of carrying fire. Flammable debris and vegetation must be removed from within a minimum 10-foot radius of all welding and cutting operations. A shovel and a 5-gallon standard backpack water container filled and with handpump attached shall be immediately available for use in the event of a fire start. C8.64 – DEBARMENT AND SUSPENSION CERTIFICATION (3/18). Pursuant to 2 CFR 180 and 2 CFR 417, Purchaser shall certify and obtain certifications from its Subcontractors regarding debarment, suspension, ineligibility, and voluntary exclusion, including additional Subcontractors obtained after award of this contract. “Subcontractors” are participants in lower tier covered transactions. Purchaser may rely upon a certification of a prospective Subcontractor that it is not proposed for debarment under 48 CFR 9.4, debarred, suspended, ineligible, or voluntarily excluded from participating in covered transactions or timber sales, unless Purchaser knows that the certification is erroneous. Purchaser shall keep the certifications of its Subcontractors on file until timber sale Termination Date and any extensions thereof, and will provide a copy at the written request of Contracting Officer. Nothing contained in the foregoing shall be construed to require establishment of a system of records in order to render in good faith the certification required by this Subsection. The knowledge and information of Purchaser is not required to exceed that which is normally possessed by a prudent person in the ordinary course of business dealings. If Purchaser knowingly enters into a timber sale transaction with a person who is proposed for debarment under 48 CFR 9.4, suspended, debarred, ineligible, or voluntarily excluded from participation in covered transactions or timber sales, in addition to other remedies available to the Government, Forest Service may pursue available remedies, including suspension and/or debarment. Contracting Officer shall provide a copy of Forms AD-1047 Certification Regarding Debarment, Suspension and Other Responsibility Matters – Primary Covered Transactions and AD-1048 Certification Regarding Debarment, Suspension, Ineligibility and Voluntary Exclusion – Lower Tier Covered Transactions to the Purchaser. Purchaser shall complete form AD-1047 and provide to the Contracting Officer upon request. Purchaser shall require each subcontractor to complete form AD-1048 and provide to the Contracting Officer upon request.