Electrical Connections, Surge Protectors and Telephone Lines Sample Clauses

Electrical Connections, Surge Protectors and Telephone Lines. All purchased and leased machines should come equipped with an external surge protector to protect their telephone, network, and electronic components, in addition to any internal surge protector. Surge protectors must come with a minimum five (5) year manufacturer’s warranty stating the surge protector will be replaced free of charge if it fails and the manufacturer will repair or replace any machine damaged by power surges when properly connected to the surge protector. All awards must include external surge suppression/power filter equipment at no additional charge and must meet the following minimum specifications. Fax/Modem Protection – In/Out RJ11 modular jacks. FCC registration numbers must be marked on each unit. Must contain automatic resettable fuse in protection circuit. Must incorporate a wideband filter to block DSL signal interference. Network Protection – In/Out RJ45 modular jacks. ETL Verified to TIA/EIA-568-B.2 Cat5e standard. Frequency Attenuation - Normal mode: 30 dB min, 45 kHz - 23 MHz. Common mode: 30 dB min, 20 kHz - 30 MHz. Remnant voltage, IEEE C62.41 Cat. B Impulse, neutral-ground: 50 Volt peak max. UL Suppressed Voltage Rating of 330 volts on all 3 modes. Unit must operate in continuous mode – no over voltage shut off disconnect. Polarity Correction – Unit must correct polarity on reverse wired outlets. Unit must not provide power if wall outlet is not properly grounded or missing ground. Minimum of 3 AC receptacles, including 1 flexible (“pigtail”) outlet. UL Listed and marked on each product.
AutoNDA by SimpleDocs
Electrical Connections, Surge Protectors and Telephone Lines. It is recommended that all purchased and leased machines are connected to an external surge protector to protect their telephone, network and electronic components; this is in addition to any internal surge protector. Customers are not required to obtain surge protectors from the equipment vendor as at the time of solicitation surge protectors are available via STC 250-000- 09-1.

Related to Electrical Connections, Surge Protectors and Telephone Lines

  • Availability of Verizon Telecommunications Services 3.1 Verizon will provide a Verizon Telecommunications Service to PCS for resale pursuant to this Attachment where and to the same extent, but only where and to the same extent, that such Verizon Telecommunications Service is provided to Verizon’s Customers.

  • Electrical connections Equipment requiring electrical connections for operation shall either be hard wired to the Authorized User's provided connections or the Contractor shall be responsible for a male electrical union. All connections shall be made by the Contractor and accomplished in accordance with National Electrical Code requirements. Electrically operated equipment shall be available in the following volts and phases: 208 volt 1 or 3 phase, 60 HZ 220 volt 1 or 3 phase, 60 HZ 440 volt 1 or 3 phase, 60 HZ

  • Local Control Center, Metering and Telemetry The NTO shall operate, pursuant to ISO Tariffs, ISO Procedures, Reliability Rules and all other applicable reliability rules, standards and criteria on a twenty-four (24) hour basis, a suitable local control center(s) with all equipment and facilities reasonably required for the ISO to exercise ISO Operational Control over NTO Transmission Facilities Under ISO Operational Control, and for the NTO to fulfill its responsibilities under this Agreement. Operation of the NYS Power System is a cooperative effort coordinated by the ISO control center in conjunction with local control centers and will require the exchange of all reasonably necessary information. The NTO shall provide the ISO with Supervisory Control and Data Acquisition (“SCADA”) information on facilities listed in Appendices A-1 and A-2 herein as well as on generation and merchant transmission resources interconnected to the NTO’s transmission facilities pursuant to the ISO OATT. The NTO shall provide metering data for its transmission facilities to the ISO, unless other parties are authorized by the appropriate regulatory authority to provide metering data. The NTO shall collect and submit to the ISO billing quality metering data and any other information for its transmission facilities required by the ISO for billing purposes. The NTO shall provide to the ISO the telemetry and other operating data from generation and merchant transmission resources interconnected to its transmission facilities that the ISO requires for the operation of the NYS Power System. The NTO will establish and maintain a strict code of conduct to prevent such information from reaching any unauthorized person or entity.

  • SS7 Network Interconnection 9.7.1 SS7 Network Interconnection is the interconnection of Global Connection local signaling transfer point switches or Global Connection local or tandem switching systems with BellSouth signaling transfer point switches. This interconnection provides connectivity that enables the exchange of SS7 messages among BellSouth switching systems and databases, Global Connection local or tandem switching systems, and other third-party switching systems directly connected to the XxxxXxxxx XX0 network.

  • Network Interconnection Architecture Each Party will plan, design, construct and maintain the facilities within their respective systems as are necessary and proper for the provision of traffic covered by this Agreement. These facilities include but are not limited to, a sufficient number of trunks to the point of interconnection with the tandem company, and sufficient interoffice and interexchange facilities and trunks between its own central offices to adequately handle traffic between all central offices within the service areas at P.01 grade of service or better. The provisioning and engineering of such services and facilities will comply with generally accepted industry methods and practices, and will observe the rules and regulations of the lawfully established tariffs applicable to the services provided.

  • Energy Resource Interconnection Service (ER Interconnection Service).

  • Drainage Systems (1) Clear culvert inlets, outlets, and sediment catching basins.

  • Network Interconnection 26.1 Interconnection between the networks of different SERVICE PROVIDERs shall be as per National Standards of CCS No.7 issued from time to time by Telecom Engineering Centre (TEC) and also subject to technical feasibility and technical integrity of the Networks and shall be within the overall framework of interconnection regulations issued by the TRAI from time to time. However, if situation so arises, INTERCONNECTION with R2MF signaling may be permitted by LICENSOR.

  • Access Toll Connecting Trunk Group Architecture 9.2.1 If CBB chooses to subtend a Verizon access Tandem, CBB’s NPA/NXX must be assigned by CBB to subtend the same Verizon access Tandem that a Verizon NPA/NXX serving the same Rate Center Area subtends as identified in the LERG.

  • Network Resource Interconnection Service (check if selected)

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!