ELECTROSTATIC DISCHARGE CONTROL PROGRAM Sample Clauses

ELECTROSTATIC DISCHARGE CONTROL PROGRAM. The Contractor shall establish and implement an effective Electrostatic Discharge (ESD) control program in accordance with the MIL-STD-1686C to minimize the effects of ESD and use as reference MIL-HDBK-263B Class 1 sensitive (0 Volts to 1,900 Volts) equipment on parts, assemblies, and equipment.
AutoNDA by SimpleDocs

Related to ELECTROSTATIC DISCHARGE CONTROL PROGRAM

  • DISCIPLINE/DISCHARGE 25.01 A Shop Xxxxxxx, or in the absence of a Shop Xxxxxxx, another employee in the bargaining unit selected by the employee affected, and in the event the member is a Shop Xxxxxxx, another Shop Xxxxxxx or an official full-time Union Representative, shall be present from the beginning of the meeting when a member of the bargaining unit: a) is given a reprimand which is to be entered on the employee’s personnel file; b) is suspended or discharged. In unusual circumstances, where it is necessary for the Employer to advise an employee by mail of discharge, the Union office will be mailed a copy of such notice. Absence of a Shop Xxxxxxx or Assistant Shop Xxxxxxx or another employee shall not invalidate the discipline, except in exceptional circumstances. 25.02 The affected employee, a Shop Xxxxxxx and the Union, shall be given a copy of any disciplinary notice which is to be entered on an employee's personnel file. The affected employee, the Shop Xxxxxxx, and the Union shall also be given a copy of any discharge notice that is given to an employee. In all cases of discipline or discharge the Employer shall notify the affected employee, and a Shop Xxxxxxx and the Union in writing of the reasons for taking such action. The notice of discipline or discharge shall be given to the affected employee and a Shop Xxxxxxx promptly and a copy of the discipline or discharge notice shall be forwarded to the Union office via fax within two (2) business days (excluding Saturday and Sunday and General Holidays) of the event. 25.03 Employees covered by this Agreement shall have access to their own personnel file, upon written request by the employee involved. Employees shall be able to obtain copies of their personnel file when requested, at the employee's expense. The Employer shall keep only one (1) personnel file per employee. (a) Employee’s written corrective action documentation(s) other than suspension will be taken from an employee’s file after fifteen (15) months should no similar offence have occurred during said period. (b) Employee’s suspension documentation(s) will be taken from an employee’s file after thirty (30) months should no similar offence have occurred during said period. (c) All documentation(s) including corrective action and suspension relating to incident(s) and/or complaint(s) of discrimination or harassment nature shall remain in an employee’s file.

  • DISCHARGE CASES If an employee believes that he has been unjustly discharged he may commence grievance procedure and it will be instituted at Step 2.

  • Quality Control Program Engineer shall have a quality control program in place that ensures that all deliverable work is of high quality. Engineer shall submit a plan detailing its program to the Inspection Branch of the TxDOT Bridge Division for review and approval prior to beginning work. State may review or audit the programs.

  • Interconnection Customer Compensation for Actions During Emergency Condition The CAISO shall compensate the Interconnection Customer in accordance with the CAISO Tariff for its provision of real and reactive power and other Emergency Condition services that the Interconnection Customer provides to support the CAISO Controlled Grid during an Emergency Condition in accordance with Article 11.6.

  • Discharge Planning If further care at home or in another facility is appropriate following discharge from the Hospital, Blue Shield will work with the Member, the attending Physician and the Hospital discharge planners to determine the most appropriate and cost effective way to provide this care.

  • Follow-up Testing An employee shall submit to unscheduled follow-up drug and/or alcohol testing if, within the previous 24-month period, the employee voluntarily disclosed drug or alcohol problems, entered into or completed a rehabilitation program for drug or alcohol abuse, failed or refused a preappointment drug test, or was disciplined for violating the provisions of this Agreement and Employer work rules. The Employer may require an employee who is subject to follow-up testing to submit to no more than six unscheduled drug or alcohol tests within any 12 month period.

  • Under-Frequency and Over Frequency Conditions The New York State Transmission System is designed to automatically activate a load- shed program as required by the NPCC in the event of an under-frequency system disturbance. Developer shall implement under-frequency and over-frequency relay set points for the Large Generating Facility as required by the NPCC to ensure “ride through” capability of the New York State Transmission System. Large Generating Facility response to frequency deviations of predetermined magnitudes, both under-frequency and over-frequency deviations, shall be studied and coordinated with the NYISO and Connecting Transmission Owner in accordance with Good Utility Practice. The term “ride through” as used herein shall mean the ability of a Generating Facility to stay connected to and synchronized with the New York State Transmission System during system disturbances within a range of under-frequency and over-frequency conditions, in accordance with Good Utility Practice and with NPCC Regional Reliability Reference Directory # 12, or its successor.

  • Local Circuit Switching Capability, including Tandem Switching Capability 4.1.3.1 Definition 4.1.3.2 Notwithstanding BellSouth’s general duty to unbundle local circuit switching, BellSouth shall not be required to unbundle local circuit switching for <<customer_name>> when <<customer_name>> serves end-users with four (4) or more voice-grade (DS-0) equivalents or lines in locations served by BellSouth’s local circuit switches, which are in the following MSAs: Atlanta, GA; Miami, FL; Orlando, FL; Ft. Lauderdale, FL; Charlotte-Gastonia-Rock Hill, NC; Greensboro-Winston Salem-High Point, NC; Nashville, TN; and New Orleans, LA, and BellSouth has provided non-discriminatory cost based access to the Enhanced Extended Link (EEL) throughout Density Zone 1 as determined by NECA Tariff No. 4 as in effect on January 1, 1999. 4.1.3.3 In the event that <<customer_name>> orders local circuit switching for a single end user account name at a single physical end user location with four (4) or more 2-wire voice-grade loops from a BellSouth central office in an MSA listed above, BellSouth shall charge <<customer_name>> the market based rate in Exhibit C for use of the local circuit switching functionality for the affected facilities. 4.1.3.4 A featureless port is one that has a line port, switching facilities, and an interoffice port. A featured port is a port that includes all features then capable or a number of then capable features specifically requested by <<customer_name>>. Any features that are not currently then capable but are technically feasible through the switch can be requested through the NBR/BFR process. 4.1.3.5 BellSouth will provide to <<customer_name>> customized routing of calls: (i) to a requested directory assistance services platform; (ii) to an operator services platform pursuant to Section 10 of Attachment 2; (iii) for <<customer_name>>’s PIC’ed toll traffic in a two (2) PIC environment to an alternative OS/DA platform designated by <<customer_name>>. <<customer_name>> customers may use the same dialing arrangements as BellSouth customers. 4.1.3.6 Remote Switching Module functionality is included in Switching Capability. The switching capabilities used will be based on the line side features they support. 4.1.3.7 Switching Capability will also be capable of routing local, intraLATA, interLATA, and calls to international customer’s preferred carrier; call features (e.g. call forwarding) and Centrex capabilities. 4.1.3.8 Where required to do so in order to comply with an effective Commission order, BellSouth will provide to <<customer_name>> purchasing local BellSouth switching and reselling BellSouth local exchange service under Attachment 1, selective routing of calls to a requested directory assistance services platform or operator services platform. <<customer_name>> customers may use the same dialing arrangements as BellSouth customers, but obtain a <<customer_name>> branded service.

  • Discharge for Cause If the Participant, prior to the Final Exercise Date, is discharged by the Company for “cause” (as defined below), the right to exercise this option shall terminate immediately upon the effective date of such discharge. “Cause” shall mean willful misconduct by the Participant or willful failure by the Participant to perform his or her responsibilities to the Company (including, without limitation, breach by the Participant of any provision of any employment, consulting, advisory, nondisclosure, non-competition or other similar agreement between the Participant and the Company), as determined by the Company, which determination shall be conclusive. The Participant shall be considered to have been discharged for “Cause” if the Company determines, within 30 days after the Participant’s resignation, that discharge for cause was warranted.

  • Rating Agency Condition The Rating Agency Condition has been satisfied for the merger, consolidation or transfer;

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!