SYSTEMIC PRE-FAT Sample Clauses

SYSTEMIC PRE-FAT. AND XXXX FAILURES 1. A fault tree type diagram showing all the evidence accumulated during the investigation 2. A description of how the evidence supports or refutes any plausible failure scenarios 3. The rationale for terminating the investigation above the root cause level Deliverables: Technical Report – Study/Services - Systemic Failure Analysis (CDRL A022) The Contractor shall perform fault isolation and root cause analysis on any non-conformance that is identified during, FAT, the Conditional Acceptance Period, Contractor POM Qualification, Government POM testing, and Qualification testing that is isolated by the Contractor or the Government to the Contractor supplied hardware. A non-conformance is defined as defect that departs from a specified requirement with respect to one or more features, dimensions, properties, or parameters that may affect subsequent operations, form, fit, or function. A nonconformance may be detected by any process, inspection, or test. The Contractor shall document and submit a Failures During FAT, Conditional Acceptance report (CDRL A080) for any non-conformances experienced during any of the above testing.
AutoNDA by SimpleDocs

Related to SYSTEMIC PRE-FAT

  • Academic Program A. Upon successful completion of the major requirements, as indicated below in III.B, SDSU will accept 38 technical course credits from the A.A.S. degree in Business – Business and Technology. Additional transferable system general education credits may be earned at WDT and may be transferred to SDSU. Students must meet all Board of Regents policies and university graduation requirements in order to receive a degree. B. Requirements to be completed at SDSU to earn a Bachelor of Science or a Bachelor of Arts degree with a major in Entrepreneurial Studies are outlined below. The general education coursework to meet South Dakota Regental System’s General Education Requirements (SGR) must also be completed as outlined below. This coursework may be taken at WDT if equivalent courses are available. Please note that BOR Policy 2.5 states, “Total transfer credit for work at two-year technical or community college may not exceed one-half of the hours required for completion of the baccalaureate degree at the accepting institution unless an approved program-specific waiver exists.” For this program, that number is 60 credits. 1. SGR Goal #1: Written Communication: ENGL 101 Composition I and ENGL 201 Composition II (6 credits) 2. SGR Goal #4: Humanities and Arts/Diversity (6 credits in 2 disciplines or a sequence of foreign language courses) 3. SGR Goal #5: Mathematics: MATH 121-121L or MATH 123 (4-5 Credits) 4. SGR Goal #6: Natural Sciences (6 credits) 1. Natural Sciences Class (4 credits) from the approved list in SDSU Bulletin, taken as needed to earn 10 or more science credits from at least two different disciplines, with a minimum of two lab 2. A minor, second major, teaching specialization: Satisfied in full by completion of the A.A.S. degree from WDT. 3. AHSS 111, Introduction to Global Citizenship and Diversity, (3 credits) Bachelor of Arts Degree (3-9 credits): 1. Completion of a Modern Foreign Language through the 202 level (0-6 credits) 2. A minor, second major, teaching specialization: Satisfied in full by completion of the A.A.S. degree from WDT. 3. AHSS 111, Introduction to Global Citizenship and Diversity, (3 credits) 1. BADM 485 - Business and Financial Decisions in a Global Economy (3 credits) (Capstone) 2. BLAW 350 - Legal Environment of Business (3 credits) 3. DSCI 424 - Operations Research or ECON 423 - Introduction to Econometrics (3 credits) 4. ECON 201 - Principles of Microeconomics (3 credits) 5. ECON 301 - Intermediate Microeconomics or ECON 431- Managerial Economics (3 credits)

  • Remic Provisions Section 10.01

  • Joint Occupational Health and Safety Committee The Employer and the Union recognize the role of the joint Occupational Health and Safety Committee in promoting a safe and healthful workplace. The parties agree that a Joint Occupational Health and Safety Committee shall be established for each Employer covered by this Collective Agreement. The Committee shall govern itself in accordance with the provisions of the Industrial Health and Safety Regulations made pursuant to the Workers’ Compensation Act. The Committee shall be as between the Employer and the Union, with equal representation, and with each party appointing its own representatives. Representatives of the Union shall be chosen by the Union membership or appointed by the Union. All minutes of the meetings of the Joint Occupational Health & Safety Committee will be recorded in a mutually agreeable format and will be sent to the Union. The Union further agrees to actively pursue with the other Health Care Unions a Joint Union Committee for the purposes of this Article. The Employer agrees to provide or cause to be provided to Employer members of the Joint Occupational Health and Safety Committee adequate training and orientation to the duties and responsibilities of committee members to allow the incumbents to fulfil those duties competently. The Union agrees to provide or cause to be provided to Union members of the Joint Occupational Health and Safety Committee adequate training and orientation to the duties and responsibilities of committee members to allow the incumbents to fulfil those duties competently. Such training and orientation shall take place within six (6) months of taking office.

  • Occupational Health and Safety Committee ‌ (a) The parties agree that a joint occupational health and safety committee will be established. The Committee shall govern itself in accordance with the provisions of the Occupational Health and Safety Regulations made pursuant to the Workers Compensation Act. The Committee shall be between the Employer and the Union, with equal representation, and with each party appointing its own representatives. The Union agrees to actively pursue with the other Health Care unions, where more than one union is certified with the Employer, a joint union/employer committee for the purposes of the Occupational Health and Safety Regulations. (b) Employees who are members of the Committee shall be granted leave without loss of pay or receive straight-time regular wages while attending meetings of the Joint Committee. Employees who are members of the Committee shall be granted leave without loss of pay or receive straight-time regular wages to participate in joint workplace inspections and joint accident investigations at the request of the Committee pursuant to the WCB Occupational Health and Safety Regulations. Committee meetings, workplace inspections and accident investigations shall be scheduled during normal working hours whenever practicable. (c) The Occupational Health and Safety Committee shall have as part of its mandate the jurisdiction to receive complaints or concerns regarding workload problems which are safety-related, the right to investigate such complaints, the right to define the problem and the right to make recommendations for a solution. Where the Committee determines that a safety-related workload problem exists, it shall inform the Employer. Within 21 days thereafter, the Employer shall advise the Committee what steps it has taken or proposes to take to rectify the safety-related workload problem identified by the Committee. If the Union is not satisfied with the Employer's response, it may refer the matter to the Industry Trouble shooter for a written recommendation. (d) No employee shall be disciplined for refusal to work when excused by the provisions of the

  • Random Drug Testing All employees covered by this Agreement shall be subject to random drug testing in accordance with Appendix D.

  • CULTURAL DIVERSITY The Cultural Diversity Requirement generally does not add units to a student's program. Rather, it is intended to be fulfilled by choosing courses from the approved list that also satisfy requirements in other areas of the student’s program; the exception is that Cultural Diversity courses may not satisfy Culture and Language Requirements for B.S. students. For example, COMM 6 – Intercultural Communication, can fulfill (3) units of the Behavioral Science requirement and (3) units of the Cultural Diversity requirement. This double counting of a class may only be done with the Cultural Diversity requirement. Courses in Cultural Diversity may be taken at the lower- division or upper-division level.

  • Health and Safety Committees In order to provide a safe and healthful workplace, local unit level LMCs shall establish Health and Safety Committees. Each committee will be composed of an equal number of representatives appointed by the Union and the Employer and will be co-chaired by a Union and Employer representative. A Union representative must be a member of the unit but either party may be accompanied by staff and/or other subject matter experts who may participate, but not vote, at meetings. Each party shall prepare and submit an agenda to the other party one week prior to any scheduled meeting. If neither party submits an agenda, the meeting shall be canceled. Each committee’s general responsibility will be to provide a safe and healthful workplace by recognizing hazards and recommending the abatement of hazards and educational programs. Each committee will: 1. Meet on an established schedule; 2. arrange periodic inspections to detect, evaluate and offer recommendations for control of potential health and safety hazards; 3. appoint members of the committee to participate in inspections, investigations, or other established health and safety functions to the extent necessary; 4. receive and review a quarterly summary of job-related health and safety reports including accident reports and make appropriate recommendations; 5. investigate all types of employee job-related accidents and all types of occupational illnesses and make recommendations; 6. promote health and safety education; 7. study the use of VDTs and make appropriate recommendations to ensure the health and safety of employees regarding such use; 8. maintain and review minutes of all committee meetings; and 9. review the availability and adequacy of first aid supplies and equipment and address any inadequacies. In cases where summary reports are provided, a committee member may request and receive an individual case file or report. In no case will an employee’s records be provided when the law forbids disclosure. In addition, employees’ names will normally be deleted but may be provided to all committee members in instances where committee members need to know the name(s) of employee(s) to effectively represent the bargaining unit(s) and disclosure of name(s) is not prohibited by law. The Employer may require committee members and union representatives to sign confidentiality statements. Members of each Health and Safety Committee will be paid by the Employer while performing committee duties, including travel time, and will also be paid for any time spent in committee approved training related to health and safety. The Committee will develop an annual training program for its members. Each Health and Safety Committee will establish rules consistent with the above principles. A mechanism to coordinate the efforts of individual Health and Safety Committees will be established at each agency.

  • Human Leukocyte Antigen Testing This plan covers human leukocyte antigen testing for A, B, and DR antigens once per member per lifetime to establish a member’s bone marrow transplantation donor suitability in accordance with R.I. General Law §27-20-36. The testing must be performed in a facility that is: • accredited by the American Association of Blood Banks or its successors; and • licensed under the Clinical Laboratory Improvement Act as it may be amended from time to time. At the time of testing, the person being tested must complete and sign an informed consent form that also authorizes the results of the test to be used for participation in the National Marrow Donor program.

  • Joint Health and Safety Committee (a) The Employer and the Union agree that they mutually desire to maintain standards of occupational health and safety in the organization, in order to prevent accidents, injury and illness. The parties agree to promote health and safety throughout the organization. The employer shall provide orientation and training in health and safety to new and current employees on an ongoing basis, and employees shall attend required health and safety training sessions. (b) Recognizing its responsibilities under the applicable legislation, the Employer agrees to accept as a member of its Joint Health and Safety Committee, at least one representative from the bargaining unit. The number of committee members will be no less than that determined by legislation and the bargaining unit will be entitled to the same membership as any other employee group on the committees. The Union shall notify the employer of their representatives. (c) Such Committee shall identify potential dangers and hazards, institute means of improving health and safety programs, and recommend actions to be taken to improve conditions related to occupational health and safety. (d) The Employer agrees to cooperate reasonably in providing necessary information to enable the Committee to fulfill its functions. The Committee shall respect the confidentiality of the information. (e) The Union agrees to endeavour to obtain the full cooperation of its membership in the observation of all safety rules and practices. (f) Meetings shall be held every third month or more frequently at the call of either co-chair, if required. The Committee shall keep Minutes of all meetings and make the Minutes available for review. (g) All time spent by a member of the Joint Health and Safety Committee attending meetings of the Committee and carrying out the members duties, shall be deemed to be time worked for which the member shall be paid by the Employer at the member's applicable rate of pay, and the member shall be entitled to such time from the member's work as necessary for those duties. (h) The employer shall take every precaution reasonable in the circumstances for the protection of a worker. [Occupational Health and Safety Act, s. 25

  • Health and Safety Committee Where required a committee will be formed and will meet where required by the Employer’s safety policies and by statute.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!