GENERAL CLASSIFICATION OF PETROLEUM COSTS Sample Clauses

GENERAL CLASSIFICATION OF PETROLEUM COSTS. All costs related to Petroleum Operations shall be classified in accordance with their end use. Classification criteria shall be included in the approved Annual Work Program and Annual Budget for the Calendar Year in which the expenditure is made. All Petroleum Operations Costs shall be classified, defined and allocated as set forth below.
Sample 1Sample 2Sample 3See All (7)
AutoNDA by SimpleDocs
GENERAL CLASSIFICATION OF PETROLEUM COSTS. All costs related to Petroleum Operations will be classified in accordance with their end use Classification criteria will be included in the approved Annual Work Program and Annual Budget for the Calendar Year in which the expenditure is made. All Petroleum Operations Costs will be classified, defined, and allocated as stated below. 2.1 EXPLORATION COSTS Any and all direct, general, and administrative costs incurred during Hydrocarbon Exploration and Appraisal activities in an area that is part of the Contract Area, including but not limited to: (a) surveys and aerial, geophysical, geochemical, paleontological, geological, topographical, and seismic studies and their interpretation; (b) core hole drilling; (c) any labor, materials, supplies, and services used in drilling Exploration Xxxxx and Evaluation Xxxxx; (d) any facilities used solely in support of the purposes described in paragraphs (a), (b), and (c) above, including access roads and acquired geological and geophysical data, all separately identified; and (e) any other cost incurred in the Exploration and Evaluation of Hydrocarbons after the Effective Date but prior to the date of approval of a Development and Production Plan with respect to the relevant Field and not covered under Articles 2.2, 2.3, and 2.4 below.
Sample 1Sample 2Sample 3See All (4)

Related to GENERAL CLASSIFICATION OF PETROLEUM COSTS

  • Construction Phase - Administration of the Construction Contract INDICATE IN STATEMENT OF WORK “NOT APPLICABLE” IF SECTION IS NOT APPLICABLE 1.1.9.1. The Construction Phase will commence with the award of the Construction Contract to a selected vendor (“Contractor”) and will terminate when final payment is made by the State to the Contractor. In any event, the construction phase will not extend 60 days beyond the substantial completion date unless extended by change order. If such extension occurs, additional costs due to the ARCHITECT/ENGINEER shall be negotiated with the State. 1.1.9.2. The ARCHITECT/ENGINEER shall work with the State during the construction of the Project to provide the administration of the contract between the State and the Contractor in accordance with the terms herein and consistent with the contract between the State and the Contractor, and the extent of his/her duties and responsibilities and the limitations of his/her authority as assigned therein shall not be modified without his/her written consent. 1.1.9.3. The ARCHITECT/ENGINEER shall advise and consult with the State, and all of the State's instructions to the Contractor shall be issued through the ARCHITECT/ENGINEER after authorization by the State. 1.1.9.4. The ARCHITECT/ENGINEER shall, at all times, have access to the work wherever it is in preparation or progress. 1.1.9.5. The ARCHITECT/ENGINEER shall make periodic visits to the Project site, at least biweekly, and shall make such further visits when reasonably requested by the State, as to familiarize himself/herself with the progress and quality of the work performed and as to determine, on the basis of such visits, if such progress and quality are in accordance with the Contract Documents. The ARCHITECT/ENGINEER shall be responsible for project meeting minutes. In addition to this, the ARCHITECT/ENGINEER shall periodically report his/her findings thereon to the State, at such times as in the exercise of his/her professional judgment such findings are appropriate and at least monthly, at the conference provided for in Section 1.1.9.6, and further at such times as the State may reasonably request. The ARCHITECT/ENGINEER shall not be required to make exhaustive or continuous on-site inspections, except as required in the exercise of his/her professional judgment for said reports and, except in particular, to fulfill the commissioning requirements. The ARCHITECT/ENGINEER shall not be responsible for construction means, methods, techniques, sequences or procedures or for safety precautions and programs in connection with the work, and he/she shall not be responsible for the Contractor's failure to carry out the work in accordance with the Contract Documents except as provided for herein specifically between the State and the ARCHITECT/ENGINEER. 1.1.9.6. In preparing the bid documents, to the extent that the ARCHITECT/ENGINEER utilizes sub- consultants for their expertise, such as, but not limited to: Landscape Architects, Civil, Structural, Mechanical, and Electrical Engineers, these consultants, in effect, become an extension of the ARCHITECT/ENGINEER. Where the term ARCHITECT/ENGINEER is used in Section 1.1.9.2 as well as 1.1.9.5, it shall include those sub-consultants when work is being performed in their area of expertise. For example, the Mechanical Engineer would inspect the under slab plumbing before it is backfilled, but then wouldn’t necessarily be needed on site until the rest of the mechanical systems are being installed. The sub-consultant shall also be required to periodically inspect the progress of the “As-builts” and verify that they are up-to-date and verify such to the ARCHITECT/ENGINEER, before the ARCHITECT/ENGINEER issues the certificate of payment for that pay period. 1.1.9.7. Based upon his/her determinations and reports made under Section 1.1.9.5 of this Agreement and upon the Contractor's applications for payment, the ARCHITECT/ENGINEER shall once every month, after an on-site conference between the State, the Contractor and the ARCHITECT/ENGINEER, determine the amount then owing to the Contractor and shall then issue a certificate of payment for the amount agreed upon. The issuance of a Certificate for Payment shall constitute a representation by the ARCHITECT/ENGINEER to the State, based on such ARCHITECT/ENGINEER'S determination and report and the data supplied to him/her by the Contractor (without affecting his/her duties defined in Section 1.1.9.5.), that the work has progressed to the point indicated; that the quality of the work is in accordance with the Contract Documents (subject to the results of any specified subsequent tests required by the Contract Documents, to immaterial and insubstantial deviations from the Contract Documents, which will be corrected prior to completion, and to any further specific qualifications stated in the Certificate for Payment); and that the Contractor is entitled to such payment in the amount certified. Provided, however, the issuance of such certificate will not affect any obligations of the Contractor to the State. By issuing a certificate for payment, the ARCHITECT/ENGINEER shall not be deemed to represent that he/she has made any examination to ascertain how and for what purpose the Contractor has used the monies paid on account of the contract sum. ARCHITECT/ENGINEER shall not accept any part of the work on behalf of the State; ARCHITECT/ENGINEER may only recommend acceptance. Final acceptance is a right reserved solely to the State. 1.1.9.8. The ARCHITECT/ENGINEER shall be, in the first instance, the interpreter of the requirements of all Construction Documents, and shall have all requisite authority relating thereto for the purposes of authorizing the Contractor to proceed or stop with any component of the project after consultation and agreement with the State. The ARCHITECT/ENGINEER shall not be liable to the State for any loss or cost incurred by the State arising from delays in the construction schedule caused by any decision made by the ARCHITECT/ENGINEER in the reasonable exercise of professional judgment either to exercise or not to exercise his/her authority to stop the Work. 1.1.9.9. The ARCHITECT/ENGINEER shall review and respond to shop drawings, samples, and other submissions of the Contractor as in conformance with the design concept and information in the Contract Documents and the designs and plans relating to the project until approved or not requiring re-submission. The ARCHITECT/ENGINEER shall also review the submittal log at construction meetings and report to the State, on a monthly basis, their findings thereon. 1.1.9.10. The ARCHITECT/ENGINEER shall prepare all change orders and supporting data for the State's approval. 1.1.9.11. The ARCHITECT/ENGINEER shall conduct inspections to determine the Dates of Substantial Completion and Final Completion and shall receive written guarantees and related documents assembled by the Contractors and shall issue a final certificate of payment in accordance with Section 1.1.9.6. 1.1.9.12. The ARCHITECT/ENGINEER shall be responsible for system commissioning in accordance with the BGS Design Guidelines and as indicated in the BGS Commissioning Guidelines. Please see the BGS website xxxx://xxx.xxxxxxx.xxx/facilities/forms . The ARCHITECT/ENGINEER shall inspect, and document, each and every system to ensure that it complies with design intent, including but not limited to: system installation, system operation, and seasonal changeover. 1.1.9.13. Except in the manner specifically provided for herein, the ARCHITECT/ENGINEER shall not be responsible to the State for the acts or omissions of the Contractor or any of the Contractor’s agents or employees, or any other person not an employee or agent of the ARCHITECT/ENGINEER performing work on the Project. The ARCHITECT/ENGINEER shall be responsible for and shall pay the amount of any increase in the total Contract Price or the total Change Order(s) Price, which increase results from an error, inconsistency, or omission in the Contract Documents or instructions. 1.1.9.14. ARCHITECT/ENGINEER shall furnish to the State, a complete set of marked-up drawings and specifications showing all the changes to the Construction Documents made by Addenda, Change Orders, Shop Drawings, RFIs and other information received from the Clerk; and General Contractor’s As-built markups. The changes to the drawings are to be created on a separate layer in the DWG set and highlighted in a box, cloud or the like in the PDF set. The specifications are also to differentiate the changes made by highlighting in a box, cloud, etc. and be provided in Microsoft Word. These drawings and specifications shall be supplied within three (3) months of the date of Substantial Completion and before final payment. 1.1.9.15. Architect/Engineer (and design team members as required) shall conduct a one-year warranty inspection of the completed construction project between the eleventh and twelfth month from the date of substantial completion and shall issue a list of defective items needing correction to the Contractor.

  • Definitions Rules of Construction In addition to terms otherwise defined herein, the following terms are used herein as defined below:

  • Accounting Procedures and Interpretation Unless otherwise specified in this Agreement, all accounting terms used herein shall be interpreted, all determinations with respect to accounting matters under this Agreement shall be made, and all financial statements and certificates and reports as to financial matters required to be furnished to the Purchasers under this Agreement shall be prepared, in accordance with GAAP applied on a consistent basis during the periods involved (except, in the case of unaudited statements, as permitted by Form 10-Q promulgated by the Commission) and in compliance as to form in all material respects with applicable accounting requirements and with the published rules and regulations of the Commission with respect thereto.

  • Definitions Principles of Construction Section 1.1. Definitions 1 Section 1.2. Principles of Construction 16

  • Definitions of General Application For purposes of this Agreement, unless otherwise specified: Agreement means the Free Trade Agreement between the Government of the People's Republic of China and the Government of the Republic of Peru; Commission means the Free Trade Commission established under Article 170 (Free Trade Commission) of Chapter 14 (Administration of the Agreement);

  • Definitions Rules of Interpretation Section 1.01. Definitions The following capitalized terms as used in this FAA shall have the following meanings:

  • Allocation of Charges There will not be any agreement or understanding between the Servicer and the Borrower (other than as expressly set forth herein or as consented to by the Administrative Agent), providing for the allocation or sharing of obligations to make payments or otherwise in respect of any Taxes, fees, assessments or other governmental charges; provided that it is understood and acknowledged that the Borrower will be consolidated with or treated as a disregarded entity of the Servicer for tax purposes.

  • Definitions Certain Rules of Construction As used herein, the following terms will have the following meanings:

  • Accounting Terms; Utilization of GAAP for Purposes of Calculations Under Agreement Except as otherwise expressly provided in this Agreement, all accounting terms not otherwise defined herein shall have the meanings assigned to them in conformity with GAAP. Financial statements and other information required to be delivered by Company to Lenders pursuant to clauses (ii), (iii) and (xii) of subsection 6.1 shall be prepared in accordance with GAAP as in effect at the time of such preparation (and delivered together with the reconciliation statements provided for in subsection 6.1(v)). Calculations in connection with the definitions, covenants and other provisions of this Agreement shall utilize GAAP as in effect on the date of determination, applied in a manner consistent with that used in preparing the financial statements referred to in subsection 5.3. If at any time any change in GAAP would affect the computation of any financial ratio or requirement set forth in any Loan Document, and Company, Administrative Agent or Requisite Lenders shall so request, Administrative Agent, Lenders and Company shall negotiate in good faith to amend such ratio or requirement to preserve the original intent thereof in light of such change in GAAP (subject to the approval of Requisite Lenders), provided that, until so amended, such ratio or requirement shall continue to be computed in accordance with GAAP prior to such change therein and Company shall provide to Administrative Agent and Lenders reconciliation statements provided for in subsection 6.1(v).

  • Uncontrollable Forces Tariff Provisions Section 14.1 of the CAISO Tariff shall be incorporated by reference into this Agreement except that all references in Section 14.1 of the CAISO Tariff to Market Participants shall be read as a reference to the Participating Generator and references to the CAISO Tariff shall be read as references to this Agreement.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!