Goals & Objectives The purpose of this Agreement is to ensure that the proper elements and commitments are in place to provide consistent IT service support and delivery to the Customer by Centre. The goal of this Agreement is to obtain mutual agreement for IT service provision between Centre and Customer. The objectives of this Agreement are to: Provide clear reference to service ownership, accountability, roles and/or responsibilities. Present a clear, concise and measurable description of service provision to the Customer. Match perceptions of expected service provision with actual service support & delivery.
Technical Objections to Grievances It is the intent of both Parties of this Agreement that no grievance shall be defeated merely because of a technical error, other than time limitations in processing the grievance through the grievance procedure. To this end, an arbitration board shall have the power to allow all necessary amendments to the grievance and the power to waive formal procedural irregularities in the processing of a grievance, in order to determine the real matter in dispute and to render a decision according to equitable principles and the justice of the case.
Performance Requirements A. There is no guaranteed minimum amount of work which will be ordered under this Contract. B. The total Contract amount will not exceed $4,900,000. C. This is a Contract for work specified in individual Job Orders. Work ordered prior to but not completed by the expiration of the Contract period, and any additional work required as a result of unforeseen conditions encountered during construction up to six (6) months after the contract expiration date, will be completed with all provisions of this Contract still in force. Performance time for each Job Order issued under this Contract will be determined in accordance with the Contract. This performance time will be determined and agreed upon by both Parties for each individual Job Order. Contractor must self-perform 20% of the Work under this Contract for ‘A’ and ‘B’ licenses. Contractor must self-perform 75% of the Work under this Contract, unless otherwise approved by the County, for ‘C’ licenses. D. This is an indefinite-quantity Contract for the supplies or services specified and effective for the period stated. Work or performance shall be made only as authorized by Job Orders issued in accordance with the ordering procedures clause. The Contractor agrees to furnish to the County when and if ordered, the supplies or services specified in the Contract up to and including the quantity designated in the Job Orders issued as the maximum designated in the Contract.
Goals and Objectives of the Agreement Agreement Goals The goals of this Agreement are to: ● Reduce wildfire risk related to the tree mortality crisis; ● Provide a financial model for funding and scaling proactive forestry management and wildfire remediation; ● Produce renewable bioenergy to spur uptake of tariffs in support of Senate Bill 1122 Bio Market Agreement Tariff (BioMat) for renewable bioenergy projects, and to meet California’s other statutory energy goals; ● Create clean energy jobs throughout the state; ● Reduce energy costs by generating cheap net-metered energy; ● Accelerate the deployment of distributed biomass gasification in California; and ● Mitigate climate change through the avoidance of conventional energy generation and the sequestration of fixed carbon from biomass waste. Ratepayer Benefits:2 This Agreement will result in the ratepayer benefits of greater electricity reliability, lower costs, and increased safety by creating a strong market demand for forestry biomass waste and generating cheap energy. This demand will increase safety by creating an economic driver to support forest thinning, thus reducing the risk of catastrophic wildfire and the associated damage to investor-owned utility (IOU) infrastructure, such as transmission lines and remote substations. Preventing this damage to or destruction of ratepayer-supported infrastructure lowers costs for ratepayers. Additionally, the ability of IOUs to use a higher- capacity Powertainer provides a much larger offset against the yearly billion-dollar vegetation management costs borne by IOUs (and hence by ratepayers). The PT+’s significant increase in waste processing capacity also significantly speeds up and improves the economics of wildfire risk reduction, magnifying the benefits listed above. The PT+ will directly increase PG&E’s grid reliability by reducing peak loading by up to 250 kilowatt (kW), and has the potential to increase grid reliability significantly when deployed at scale. The technology will provide on-demand, non- weather dependent, renewable energy. The uniquely flexible nature of this energy will offer grid managers new tools to enhance grid stability and reliability. The technology can be used to provide local capacity in hard-to-serve areas, while reducing peak demand. Technological Advancement and Breakthroughs:3 This Agreement will lead to technological advancement and breakthroughs to overcome barriers to the achievement of California’s statutory energy goals by substantially reducing the LCOE of distributed gasification, helping drive uptake of the undersubscribed BioMAT program and increasing the potential for mass commercial deployment of distributed biomass gasification technology, particularly through net energy metering. This breakthrough will help California achieve its goal of developing bioenergy markets (Bioenergy Action Plan 2012) and fulfil its ambitious renewable portfolio standard (SB X1-2, 2011-2012; SB350, 2015). The PT+ will also help overcome barriers to achieving California’s greenhouse gas (GHG) emissions reduction (AB 32, 2006) and air quality improvement goals. It reduces greenhouse gas and criteria pollutants over three primary pathways: 1) The PT+’s increased capacity and Combined Heat and Power (CHP) module expand the displacement of emissions from conventional generation; 2) the biochar offtake enables the sequestration of hundreds of tons carbon that would otherwise have been released into the atmosphere; and 3) its increased processing capacity avoids GHG and criteria emissions by reducing the risk of GHG emissions from wildfire and other forms of disposal, such as open pile burning or decomposition. The carbon sequestration potential of the biochar offtake is particularly groundbreaking because very few technologies exist that can essentially sequester atmospheric carbon, which is what the PT+ enables when paired with the natural forest ecosystem––an innovative and groundbreaking bio-energy technology, with carbon capture and storage. Additionally, as noted in the Governor’s Clean Energy Jobs Plan (2011), clean energy jobs are a critical component of 2 California Public Resources Code, Section 25711.5(a) requires projects funded by the Electric Program Investment Charge (EPIC) to result in ratepayer benefits. The California Public Utilities Commission, which established the EPIC in 2011, defines ratepayer benefits as greater reliability, lower costs, and increased safety (See CPUC “Phase 2” Decision 00-00-000 at page 19, May 24, 2012, xxxx://xxxx.xxxx.xx.xxx/PublishedDocs/WORD_PDF/FINAL_DECISION/167664.PDF). 3 California Public Resources Code, Section 25711.5(a) also requires EPIC-funded projects to lead to technological advancement and breakthroughs to overcome barriers that prevent the achievement of the state’s statutory and energy goals. California’s energy goals. When deployed at scale, the PT+ will result in the creation of thousands of jobs across multiple sectors, including manufacturing, feedstock supply chain (harvesting, processing, and transportation), equipment operation, construction, and project development. ● Annual electricity and thermal savings; ● Expansion of forestry waste markets; ● Expansion/development of an agricultural biochar market; ● Peak load reduction; ● Flexible generation; ● Energy cost reductions; ● Reduced wildfire risk; ● Local air quality benefits; ● Water use reductions (through energy savings); and ● Watershed benefits.
Goals and Objectives The purpose of this Agreement is to ensure that the proper elements and commitments are in place to provide consistent service support and delivery to the customers by the Service Providers. The goal of this Agreement is to obtain mutual agreement for the provision of information and communication between the Service Provider and customer. The objective of this Agreement is to: • Provide clear reference to service ownership, accountability, roles and responsibilities. • Present clear, concise and measurable description of service provision to the customer. • Match perceptions of the expected service provision with actual service support and delivery.
Forecasting Requirements 19.5.1 The Parties shall exchange technical descriptions and forecasts of their Interconnection and traffic requirements in sufficient detail necessary to establish the Interconnections necessary for traffic completion to and from all Customers in their respective designated service areas.
Scope and Objectives 1. This Partnership Agreement (hereinafter referred to as the “Agreement”) defines the rights and obligations of the Parties and sets forth the terms and conditions of their cooperation in the implementation of the Project. 2. The Parties shall act in accordance with the legal framework of the EEA Financial Mechanism 2014-2021, namely with the Regulation on the implementation of the EEA Financial Mechanism 2014-2021 (hereinafter referred to as the “Regulation”). The Parties expressly acknowledge to have access to and to be familiar with the content of the Regulation. 3. Any Annexes to this Agreement constitute an integral part of the Agreement. In case of inconsistencies between the Annexes and the Agreement, the latter shall prevail.
Project Requirements 1. Project must conform to regulations under 24 CFR Part 92, commonly known as the HOME Regulations.
Agreement Objectives (a) The fundamental objective that the Parties have in creating the Agreement is to produce an agreed industrial relations framework that encourages achievement of the following goals on the Project. (1) A safe and healthy Project Site environment where everyone works towards achieving the health and safety management philosophy of an injury and incident free Project; (2) A Project where everyone has the opportunity to perform their best work and achieve a sense of personal satisfaction by the time they complete their work assignment; (3) A Project where all participants' efforts and best work translate into a high quality result for the Project; (4) A Project where all participants work toward the common goal of completing the construction work on the Project within the defined schedule and budget; (5) A Project where leaders focus on understanding and dealing with people issues; (6) A Project where all participants listen to others point of view and act to amicably resolve any differences of opinion that may occur from time to time without ever resorting to unreasonable or unlawful means to achieve the result they wish to achieve; (7) A Project where, by all the participants acting in a considerate and respectful manner, positive relations with the local community they are performing the construction work in are maintained. (b) The Employer is accountable to: (1) Provide the management resource and support needed to achieve an injury and incident free Project; (2) Encourage its leaders to focus on issues raised by any member of their team; (3) Ensure its leaders act to address appropriately and in a timely manner, any concern raised by any member of their team; (4) Act at all times with fairness, honesty and in a trustworthy manner, responding to issues or concerns raised in a timely manner; (5) Recognise the talents and capabilities of their Employees and encourage excellence in construction execution. (c) Each Employee is accountable to: (1) Establish and maintain a safe and healthy work area, ensure safe and healthy work practices are followed at all times and within their duty of care, take responsibility for their personal safety and the safety of other Employees; (2) Comply with Project environmental health and safety regulations, procedures and practices; (3) Participate in and comply with the Project’s cultural and environmental processes; (4) Ensure their personal fitness for work on each day they are scheduled to work; (5) In all of their dealings with other Employees and their Employer, act with fairness and respect; (6) Work towards both the Project and their team’s goals to the full extent of their personal capacity; and (7) Raise any personal concern/issue directly with their immediate team leader/supervisor thereby providing the Employer with an opportunity to resolve/assist the concern/issue. If the team leader/supervisor is not available, then raise the matter with a more senior Employer leader.
Project Objectives 1.1 (Type the Project objectives)
