Kirin Manufacture of Dendreon Components Sample Clauses

Kirin Manufacture of Dendreon Components. Kirin agrees to provide Dendreon, its Affiliates and Sublicensees with their commercial requirements of Kirin Components necessary for Licensed Kirin Products for which Regulatory Approval has been obtained, pursuant to the terms of this Article 3. In addition, if so requested by Dendreon, Kirin may negotiate with Dendreon for the manufacture and supply by Kirin to Dendreon of certain Separation Devices, Reagents and/or Dendreon Antigens at a transfer price in an amount in U.S. dollars equal to Kirin's Fully-Burdened Manufacturing Costs for such Separation Devices, Reagents and/or Dendreon Antigens plus a handling fee of [ * ], with any manufacture and supply to be governed by the terms of this Agreement and any additional terms negotiated by the Parties. The Parties also agree to amend the terms of the Agreement to reflect such agreed terms for the manufacture and supply by Kirin of Separation Devices, Reagents and/or Dendreon Antigens, if any.
Sample 1Sample 2
AutoNDA by SimpleDocs
Kirin Manufacture of Dendreon Components. (a) Kirin agrees to provide Dendreon, its Affiliates and Sublicensees with their commercial requirements of Kirin Components necessary for Licensed Kirin Products for which Regulatory Approval has been obtained, pursuant to the terms of this Article 3. In addition, if so requested by Dendreon, Kirin may negotiate with Dendreon for the manufacture and supply by Kirin to Dendreon of certain Separation Devices, Reagents and/or Dendreon Antigens at a transfer price in an amount in U.S. dollars equal to Kirin's Fully-Burdened Manufacturing Costs for such Separation Devices, Reagents and/or Dendreon Antigens plus a handling fee of twenty percent (20%), with any manufacture and supply to be governed by the
Sample 1
Kirin Manufacture of Dendreon Components. (a) Kirin agrees to provide Dendreon, its Affiliates and Sublicensees with their commercial requirements of Kirin Components necessary for Licensed Kirin Products for which Regulatory Approval has been obtained, pursuant to the terms of this Article 3. In addition, if so requested by Dendreon, Kirin may negotiate with Dendreon for the manufacture and supply by Kirin to Dendreon of certain Separation Devices, Reagents and/or Dendreon Antigens at a transfer price in an amount in U.S. dollars equal to Kirin's Fully-Burdened Manufacturing Costs for such Separation Devices, Reagents and/or Dendreon Antigens plus a handling fee of twenty percent (20%), with any manufacture and supply to be governed by the terms of this Agreement and any additional terms negotiated by the Parties. The Parties also agree to amend the terms of the Agreement to reflect such agreed terms for the manufacture and supply by Kirin of Separation Devices, Reagents and/or Dendreon Antigens, if any. (b) Subject to the terms of its license to manufacture PA2024 (under the Kirin PA2024 Option set forth in Section 2.5 of the Collaborative License Agreement), Kirin shall manufacture PA2024 on the following terms and conditions: (i) Neither Kirin's manufacture nor use of PA2024 shall interfere with Kirin's use of Reasonable Efforts to develop, obtain Regulatory Approval in the Kirin Territory for, and market and sell in the Kirin Territory, APC 8015. (ii) The manufacturing shall be conducted in accordance with all applicable laws, regulations and Regulatory Approvals. (iii) Kirin may manufacture Dendreon Antigen PA2024 at manufacturing facilities anywhere in the world on the following terms and conditions: (1) Kirin shall have no right to execute an agreement to engage or hire any Third-Party manufacturing facility until after it exercises the Kirin PA2024 Option. Kirin shall promptly notify Dendreon (within thirty (30) days) after it engages or hires any Third-Party manufacturing facility. Kirin may submit a request for a Third Party manufacturing facility under this Section 3.9(b)(iii) without exercising the Kirin PA2024 Option. Kirin's request for Third-Party manufacturing facilities under this Section 3.9(b)(iii) shall not be treated as an exercise of the Kirin PA2024 Option (which exercise shall require a separate notice). (2) Prior to commencing manufacturing of PA2024 (from time to time) at any Third-Party manufacturing facility outside the Kirin Territory, Kirin shall notify and request D...
Sample 1

Related to Kirin Manufacture of Dendreon Components

  • Manufacture 2.1. The LED(s) on the LED module shall be equipped with suitable fixation elements. 2.2. The fixation elements shall be strong and firmly secured to the LED(s) and the LED module.

  • Manufacturing (a) The Supplier shall without limitation be responsible, at no additional cost to the Purchaser, for: sourcing and procuring all raw materials for the Products; obtaining all necessary approvals, permits and licenses for the manufacturing of the Products; providing sufficient qualified staff and workers to perform the obligations under this Purchase Agreement; implementing and maintaining effective inventory and production control procedures with respect to the Products; and handling other matters as reasonably requested by the Purchaser from time to time. (b) The Supplier shall not change any process, material, component, packaging or manufacturing location without the Purchaser’s express prior written approval.

  • Manufacture of Products All Products marketed through Grantor's Web ------------------------- Site shall be manufactured, packaged, prepared, and shipped in accordance with the specifications and requirements described on Exhibit A hereto as it may be modified from time to time. Quality control standards relating to the Product's weight, color, consistency, micro-biological content, labeling and packaging are also set forth on Exhibit A. In the event that Exhibit A is incomplete, Products shall be manufactured and shipped in accordance with industry standards.

  • API If the Software offers integration capabilities via an API, your use of the API may be subject to additional costs or Sage specific policies and terms and conditions (which shall prevail in relation to your use of the API). You may not access or use the API in any way that could cause damage to us or the Software, or in contravention of any applicable laws. We reserve the right in our sole discretion, to: (i) update any API from time to time; (ii) place limitations around your use of any API; and (iii) deny you access to any API in the event of misuse by you or to otherwise protect our legitimate interests.

  • PRODUCT MANUFACTURER'S SUPPLIERS Only those dealers/distributors listed by the manufacturer will be considered authorized to act on behalf of the Product Manufacturer.

  • Product ACCEPTANCE Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User(s) shall have thirty (30) days from the date of delivery to accept hardware products and sixty (60) days from the date of delivery to accept all other Product. Where the Contractor is responsible for installation, acceptance shall be from completion of installation. Failure to provide notice of acceptance or rejection or a deficiency statement to the Contractor by the end of the period provided for under this clause constitutes acceptance by the Authorized User(s) as of the expiration of that period. The License Term shall be extended by the time periods allowed for trial use, testing and acceptance unless the Commissioner or Authorized User agrees to accept the Product at completion of trial use. Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User shall have the option to run testing on the Product prior to acceptance, such tests and data sets to be specified by User. Where using its own data or tests, Authorized User must have the tests or representative set of data available upon delivery. This demonstration will take the form of a documented installation test, capable of observation by the Authorized User, and shall be made part of the Contractor’s standard documentation. The test data shall remain accessible to the Authorized User after completion of the test. In the event that the documented installation test cannot be completed successfully within the specified acceptance period, and the Contractor or Product is responsible for the delay, Authorized User shall have the option to cancel the order in whole or in part, or to extend the testing period for an additional thirty (30) day increment. Authorized User shall notify Contractor of acceptance upon successful completion of the documented installation test. Such cancellation shall not give rise to any cause of action against the Authorized User for damages, loss of profits, expenses, or other remuneration of any kind. If the Authorized User elects to provide a deficiency statement specifying how the Product fails to meet the specifications within the testing period, Contractor shall have thirty (30) days to correct the deficiency, and the Authorized User shall have an additional sixty (60) days to evaluate the Product as provided herein. If the Product does not meet the specifications at the end of the extended testing period, Authorized User, upon prior written notice to Contractor, may then reject the Product and return all defective Product to Contractor, and Contractor shall refund any monies paid by the Authorized User to Contractor therefor. Costs and liabilities associated with a failure of the Product to perform in accordance with the functionality tests or product specifications during the acceptance period shall be borne fully by Contractor to the extent that said costs or liabilities shall not have been caused by negligent or willful acts or omissions of the Authorized User’s agents or employees. Said costs shall be limited to the amounts set forth in the Limitation of Liability Clause for any liability for costs incurred at the direction or recommendation of Contractor.

  • Third Party Components The Products and Services may contain third party components (including open source software) subject to separate license agreements. To the limited extent a third party license expressly supersedes this XXXX, such third party license governs Customer’s use of that third party component.

  • Products Products available under this Contract are limited to Software, including Software as a Service, products and related products as specified in Appendix C, Pricing Index. Vendor may incorporate changes to their product offering; however, any changes must be within the scope of products awarded based on the posting described in Section 1.B above. Vendor may not add a manufacturer’s product line which was not included in the Vendor’s response to the solicitation described in Section 1.B above.

  • Manufacturing Services Jabil will manufacture the Product in accordance with the Specifications and any applicable Build Schedules. Jabil will reply to each proposed Build Schedule that is submitted in accordance with the terms of this Agreement by notifying Company of its acceptance or rejection within three (3) business days of receipt of any proposed Build Schedule. In the event of Jabil’s rejection of a proposed Build Schedule, Jabil’s notice of rejection will specify the basis for such rejection. When requested by Company, and subject to appropriate fee and cost adjustments, Jabil will provide Additional Services for existing or future Product manufactured by Jabil. Company shall be solely responsible for the sufficiency and adequacy of the Specifications [***].

  • Manufacturing License Subject to the terms of this Agreement, including without limitation Section 2.2, Theravance grants to GSK an exclusive license under the Theravance Patents and Theravance Know-How to make and have made API Compound or formulated Alliance Product in the Territory.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!