Common use of Lathing Clause in Contracts

Lathing. 1. Lathing shall be assigned to journeymen and apprentices represented by this Regional Council on the following work: erecting, constructing, installing and completing of all light iron construction, furring; making and erecting of brackets, clips and hangers; wood, wire and metal lath; plaster board or other material which takes the place of same to which plastic or acoustical material is adhered; corner beads, all floor construction; arches erected for the purpose of holding plaster, cement, concrete or any other plastic or acoustical material. 2. All carrying bars, purlins and furring, regardless of size; light iron and metal furring of all descriptions such as rods, channels, flat iron, nailock, screwlock, xxxxxxx and other ceiling bars or systems for the receipt of metal lath, rock lath, gypsum board, or any other materials and all light iron and metal studs such as stran studs, penn metal, xxxxx, truscon and other trade names of metal studs and all other types of light iron and metal studs, no matter what the manufacturer including Unistrut, when such studs are to receive a dry wall finish, such as gypsum board, wall board, wooden paneling, etc., or when such studs are to receive metal lath, rock lath or other material for the application of plaster or other sprayed on wet material; and all other light iron furring erected to receive lath, plastic or acoustical materials. 3. The nailing, tying and fastening of all wire and metallic lath such as wirecloth, wire mesh, expanded metal lath, hyrib lath and all rib and flat expanded metal lath and wire of all descriptions as well as the placing of all hangers and all inserts used for the purpose of supporting suspended ceiling of any of the above types of light iron or metal furring which receive lath, plastic or acoustical materials; the placing of all types of floor lath, such as hyrib lath, paper-back steeltex floor lath, Penn metal rib, and all other appurtenances connected therewith. 4. The erection of all metal plastering accessories such as metal corner beads, door and window casing beads, metal picture mould, metal chair rail, metal base and base screed and any and all other metal plastering accessories which are covered and/or serve as a ground guard, stop, or screed for plastic material. 5. Such other work as falls within this article as such other work may now exist or may come into being as a result of the development of new methods and new materials, including, but not limited to the installation and erection of the drivit and other synthetic stuccos and similar systems. 6. Installation of formwork for reinforced concrete construction where such agreements prevail. 7. The loading, unloading, carrying, placing and handling of all materials falling within the trade jurisdiction of this Council from the point of delivery on the jobsite to the point where work is to be performed with said materials.

Lathing. 1. Lathing shall be assigned to journeymen and apprentices represented by this Regional Council on the following work: erecting, constructing, installing and completing of all light iron construction, furring; making and erecting of brackets, clips and hangers; wood, wire and metal lath; plaster board or other material which takes the place of same to which plastic or acoustical material is adhered; corner beads, all floor construction; arches erected for the purpose of holding plaster, cement, concrete or any other plastic or acoustical material. 2. All carrying bars, purlins and furring, regardless of size; light iron and metal furring of all descriptions such as rods, channels, flat iron, nailock, screwlock, xxxxxxx and other ceiling bars or systems for the receipt of metal lath, rock lath, gypsum board, or any other materials and all light iron and metal studs such as stran studs, penn metal, xxxxx, truscon and other trade names of metal studs and all other types of light iron and metal studs, no matter what the manufacturer including Unistrut, when such studs are to receive a dry wall finish, such as gypsum board, wall board, wooden paneling, etc., or when such studs are to receive metal lath, rock lath or other material for the application of plaster or other sprayed on wet material; and all other light iron furring erected to receive lath, plastic or acoustical materials. Installation of all Unistrut. 3. The nailing, tying and fastening of all wire and metallic lath such as wirecloth, wire mesh, expanded metal lath, hyrib lath and all rib and flat expanded metal lath and wire of all descriptions as well as the placing of all hangers and all inserts used for the purpose of supporting suspended ceiling of any of the above types of light iron or metal furring which receive lath, plastic or acoustical materials; the placing of all types of floor lath, such as hyrib lath, paper-back steeltex floor lath, Penn metal rib, and all other appurtenances connected therewith. 4. The erection of all metal plastering accessories such as metal corner beads, door and window casing beads, metal picture mould, metal chair rail, metal base and base screed and any and all other metal plastering accessories which are covered and/or serve as a ground guard, stop, or screed for plastic material. 5. Such other work as falls within this article as such other work may now exist or may come into being as a result of the development of new methods and new materials, including, but not limited to the installation and erection of the drivit and other synthetic stuccos and similar systems. 6. Installation of formwork for reinforced concrete construction where such agreements prevail. 7. The loading, unloading, carrying, placing and handling of all materials falling within the trade jurisdiction of this Council from the point of delivery on the jobsite to the point where work is to be performed with said materials.