Reallocation of Pro Rata Share to Reduce Fronting Exposure During any period in which any Revolving Credit Lender is a Defaulting Lender, for purposes of computing the amount of the obligation of each Revolving Credit Lender that is a Non-Defaulting Lender to acquire, refinance or fund participations in Letters of Credit or Swing Line Loans pursuant to Section 2.03, the “Pro Rata Share” of each Non-Defaulting Lender’s Revolving Credit Loans and L/C Obligations shall be computed without giving effect to the Revolving Credit Commitment of that Defaulting Lender; provided that (i) each such reallocation shall be given effect only if, at the date the applicable Revolving Credit Lender becomes a Defaulting Lender, no Default or Event of Default has occurred and is continuing; and (ii) the aggregate obligation of each Non-Defaulting Lender to acquire, refinance or fund participations in Letters of Credit and Swing Line Loans shall not exceed the positive difference, if any, of (1) the Revolving Credit Commitment of that Non-Defaulting Lender minus (2) the aggregate Outstanding Amount of the Revolving Credit Loans of that Non-Defaulting Lender. No reallocation hereunder shall constitute a waiver or release of any claim of any party hereunder against a Defaulting Lender arising from that Lender having become a Defaulting Lender, including any claim of a Non-Defaulting Lender as a result of such Non-Defaulting Lender’s increased exposure following such reallocation. If the allocation described in this clause (iv) cannot, or can only partially, be effected, the Borrower shall, without prejudice to any right or remedy available to it hereunder or under law, (x) first, prepay Swing Line Loans in an amount equal to the Swing Line Lenders’ Fronting Exposure and (y) second, Cash Collateralize the L/C Issuers’ Fronting Exposure in accordance with the procedures satisfactory to such L/C Issuer (in its sole discretion).
Minimum Amounts and Maximum Number of Eurodollar Tranches Notwithstanding anything to the contrary in this Agreement, all borrowings, conversions, continuations and optional prepayments of Eurodollar Loans hereunder and all selections of Interest Periods hereunder shall be in such amounts and be made pursuant to such elections so that, (a) after giving effect thereto, the aggregate principal amount of the Eurodollar Loans comprising each Eurodollar Tranche shall be equal to $5,000,000 or a whole multiple of $1,000,000 in excess thereof and (b) no more than ten Eurodollar Tranches shall be outstanding at any one time.
Unbundled Loop Modifications (Line Conditioning 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Subloop that may diminish the capability of the Loop or Subloop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the BellSouth’s TR 73600 Unbundled Local Loop Technical Specification.
2.5.2 BellSouth will remove load coils only on copper Loops and Subloops that are less than eighteen thousand (18,000) feet in length.
2.5.3 For any copper loop being ordered by NewPhone which has over six thousand (6,000) feet of combined bridged tap will be modified, upon request from NewPhone, so that the loop will have a maximum of six thousand (6,000) feet of bridged tap. This modification will be performed at no additional charge to NewPhone. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper Loop that will result in a combined total of bridged tap between two thousand five hundred (2,500) and six thousand (6,000) feet will be performed at the rates set forth in Exhibit A.
2.5.4 NewPhone may request removal of any unnecessary and non-excessive bridged tap (bridged tap between zero (0) and two thousand five hundred (2,500) feet which serves no network design purpose), at rates pursuant to BellSouth’s SC Process as mutually agreed to by the Parties.
2.5.5 Rates for ULM are as set forth in Exhibit A.
2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered.
2.5.7 If NewPhone requests ULM on a reserved facility for a new Loop order, BellSouth may perform a pair change and provision a different Loop facility in lieu of the reserved facility with ULM if feasible. The Loop provisioned will meet or exceed specifications of the requested Loop facility as modified. NewPhone will not be charged for ULM if a different Loop is provisioned. For Loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the Loop provisioned.
2.5.8 NewPhone shall request Loop make up information pursuant to this Attachment prior to submitting a service inquiry and/or a LSR for the Loop type that NewPhone desires BellSouth to condition.
2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for NewPhone, NewPhone will submit a SI to BellSouth. If a spare Loop facility that meets the Loop modification specifications requested by NewPhone is available at the location for which the ULM was requested, NewPhone will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, NewPhone will not be charged for ULM but will only be charged the service order charges for submitting an order.
Interconnection Facility Options The Intercarrier Compensation provisions of this Agreement shall apply to the exchange of Exchange Service (EAS/Local) traffic between CLEC's network and Qwest's network. Where either Party acts as an IntraLATA Toll provider, each Party shall xxxx the other the appropriate charges pursuant to its respective tariff or price lists. Where either Party interconnects and delivers traffic to the other from third parties, each Party shall xxxx such third parties the appropriate charges pursuant to its respective tariffs, price lists or contractual offerings for such third party terminations. Absent a separately negotiated agreement to the contrary, the Parties will directly exchange traffic between their respective networks without the use of third party transit providers.
DVBE Commitment This section is applicable if Contractor received a disabled veteran business enterprise (“DVBE”) incentive in connection with this Agreement. Contractor’s failure to meet the DVBE commitment set forth in its bid or proposal constitutes a breach of the Agreement. If Contractor used DVBE subcontractor(s) in connection with this Agreement: (i) Contractor must use the DVBE subcontractors identified in its bid or proposal, unless the JBE approves in writing replacement by another DVBE subcontractor in accordance with the terms of this Agreement; and (ii) Contractor must complete and return to the JBE a post-contract certification form promptly upon completion of the awarded contract, and by no later than the date of submission of Contractor’s final invoice to the JBE. (The post-contract certification form is located at: xxxxx://xxx.xxxxxx.xx.xxx/documents/JBCM-Post- Contract-Certification-Form.docx) If the Contractor fails to do so, the JBE will withhold $10,000 from the final payment, or withhold the full payment if it is less than $10,000, until the Contractor submits a complete and accurate post-contract certification form. The JBE shall allow the Contractor to cure the deficiency after written notice of the Contractor’s failure to complete and submit an accurate post- contract certification form. Notwithstanding the foregoing and any other law, if after at least 15 calendar days, but no more than 30 calendar days, from the date of the written notice the Contractor refuses to comply with these certification requirements, the JBE shall permanently deduct $10,000 from the final payment, or the full payment if less than $10,000. The post-contract certification form shall include: (1) the total amount of money Contractor received under the Agreement, (2) the total amount of money and the percentage of work that Contractor committed to provide to each DVBE subcontractor; (3) the name and address of each DVBE subcontractor to which Contractor subcontracted work in connection with the Agreement; (4) the amount of money each DVBE subcontractor actually received from Contractor in connection with the Agreement, and the corresponding percentage this payment comprises of the total amount of money Contractor received under the Agreement; and (5) that all payments under the Agreement have been made to the applicable DVBE subcontractors. Upon request by the JBE, Contractor shall provide proof of payment for the work. A person or entity that knowingly provides false information shall be subject to a civil penalty for each violation. Contractor will comply with all rules, regulations, ordinances and statutes that govern the DVBE program, including, without limitation, Military and Veterans Code section 999.5.
Time Commitment The Advisor shall, and shall cause its Affiliates and their respective employees, officers and agents to, devote to the Company such time as shall be reasonably necessary to conduct the business and affairs of the Company in an appropriate manner consistent with the terms of this Agreement. The Company acknowledges that the Advisor and its Affiliates and their respective employees, officers and agents may also engage in activities unrelated to the Company and may provide services to Persons other than the Company or any of its Affiliates.
Objectives and Commitments 7.1 The Objectives of the Parties to this Agreement are:
(a) to promote fair, cooperative and productive workplace relations in the building and construction industry;
(b) to provide a detailed set of agreed employment benefits, conditions, rights and obligations;
(c) to explore the potential for innovation and new technologies;
(d) to consider any benefits of alternative hours of work;
(e) to support the establishment of consultative bodies to consider the impact of climate change on the working conditions in the industry;
(f) to establish practices that support opportunities for a diversified workforce;
(g) to support the implementation of highest possible levels of OHS practices, procedures and training;
(h) to ensure that fair and equitable employment practices are applied in the workplace;
(i) to improve efficiency in the workplace;
(j) to provide for the establishment and observance of an effective disputes settlement procedure that involves Employees and their representatives, when requested, at the earliest stage of any dispute or potential dispute.
7.2 The Parties to this Agreement commit themselves to ensuring that:
(a) The efficiency measures contained in this Agreement are implemented and lead to real gains in productivity.
(b) The principles of industry modernisation are realised during the life of this Agreement (in accordance with Part 11).
(c) Productivity gains will not be achieved at the expense of health and safety standards.
(d) The disputes settlement procedures provided herein are strictly adhered to.
(e) Employment should wherever possible be full time and on going.
Service Level Commitment IBM provides the following service level commitment (“SLA”) for the Cloud Service, after IBM makes the Cloud Service available to you.
Revolving Commitments (a) Subject to the terms and conditions hereof, each Lender severally agrees to make revolving credit loans (“Revolving Loans”) to the Borrower from time to time on any Business Day during the Commitment Period, at such times as the Borrower may request in accordance with Section 2.2, in an aggregate principal amount at any one time outstanding which, when added to such Lender’s Applicable Percentage of the aggregate principal amount of Swingline Loans then outstanding, does not exceed the amount of such Lender’s Commitment; provided, however, that (i) no Revolving Loan shall be made to the extent the aggregate unpaid principal amount of all Loans would exceed the Total Commitments, (ii) no Borrowing Base A Loans shall be made to the extent that the aggregate unpaid principal amount of all Borrowing Base A Loans would exceed the aggregate Loan Value of the Pledged Eligible Assets (including the Pledged Eligible Assets referred to in Section 2.2(a)(ii) with respect to such Revolving Loan) and (iii) no Borrowing Base B Loans shall be made to the extent that the aggregate amount of all Borrowing Base B Loans would exceed the Borrowing Base B Limit; provided further that Borrowing Base B Loans may not be borrowed on any date in any rolling period of 90 consecutive days if Borrowing Base B Loans have already been outstanding for 30 days during such period. During the Commitment Period, the Borrower may borrow, prepay the Revolving Loans in whole or in part, and reborrow, all in accordance with the terms and conditions hereof.
(b) The Borrower shall repay all outstanding Revolving Loans on the Termination Date.
(c) The failure of any Lender to make any Revolving Loan required to be made by it shall not relieve any other Lender of its obligations hereunder; provided that the Commitments of the Lenders are several and no Lender shall be responsible for any other Lender’s failure to make Revolving Loans as required.
Reallocation of Applicable Percentages to Reduce Fronting Exposure During any period in which there is a Defaulting Lender, for purposes of computing the amount of the obligation of each non-Defaulting Lender to acquire, refinance or fund participations in Letters of Credit or Swing Line Loans pursuant to Sections 2.03 and 2.04, the “Applicable Percentage” of each non-Defaulting Lender shall be computed without giving effect to the Commitment of that Defaulting Lender; provided, that, (i) each such reallocation shall be given effect only if, at the date the applicable Lender becomes a Defaulting Lender, no Default or Event of Default exists; and (ii) the aggregate obligation of each non-Defaulting Lender to acquire, refinance or fund participations in Letters of Credit and Swing Line Loans shall not exceed the positive difference, if any, of (1) the Commitment of that non-Defaulting Lender minus (2) the aggregate Outstanding Amount of the Committed Loans of that Lender.
