Model Complexes Sample Clauses

Model Complexes. Except as may be otherwise permitted under the applicable Loan Documents at the time the Lender has approved the inclusion of the Approved Subdivision, with respect to each Approved Subdivision in which a Borrower is constructing or marketing Units, Borrower will maintain an active complex of Model Units representing some of the Unit type(s) available for sale in such Approved Subdivision or will notify Lender that Borrower will be marketing Units from Models owned by Borrower in the same metropolitan area as the Approved Subdivision. If Models are located in the Approved Subdivision, Borrower will grant to Lender a first priority Deed of Trust covering such Model Units which will not be subject to release, until all corresponding plan types are sold pursuant to Section 2.7.
Sample 1Sample 2
AutoNDA by SimpleDocs
Model Complexes. With respect to each Approved Subdivision in which Borrower is constructing or marketing Units, unless otherwise agreed by the Agent, Borrower will maintain an active complex of Model Units representing some of the Unit type(s) available for sale in such Approved Subdivision and, except for Sale and Leaseback Transactions involving Model Units, as to which the provisions of Section 2.8(a)(iv) apply, will grant to the Agent, as agent for the Banks, a first priority Deed of Trust covering such Model Units which will not be subject to release until such time as there are less than 10 unsold Lots remaining in such Approved Subdivision that are owned by Borrower or which Borrower is entitled to acquire pursuant to an Option/Purchase Agreement.
Sample 1
Model Complexes. With respect to each Approved Subdivision in which a Borrower is constructing or marketing Units, Borrower will maintain an active complex of Model Units representing some of the Unit type(s) available for sale in such Approved Subdivision or will notify Bank that Borrower will be marketing Units from Models owned by Borrower in the same metropolitan area as the Approved Subdivision. If Models are located in the Approved Subdivision, Borrower will grant to Bank a first priority Deed of Trust covering such Model Units which will not be subject to release, until all corresponding plan types are subject to a Purchase Contract pursuant to Section 2.10.
Sample 1
Model Complexes. With respect to each Approved Subdivision, unless otherwise agreed by Administrative Agent, Borrower will, and will cause each Project Owner to, maintain an active complex of Model Units representing some of the Unit types available for sale in such Approved Subdivision.
Sample 1
Model Complexes. Figure 3.1.1 X-ray crystallographic structures of single and bis-imidazole Cu(II) model complexes 67 Chapter 4: Applications of 2dq, double quantum harmonic, analysis to Cu(II) model and Cu(II)-A complexes
Sample 1
Model Complexes. Table 5.1.1 ESEEM simulation parameters for Cu(II) imidazole model complexes using orientation selection for  = 234 ns 105
Sample 1
Model Complexes. Figure 4.3.1.1.1-2 shows the powder three-pulse ESEEM waveform and corresponding FT for the mono-imidazole complex, Cu(II)(dien)(2-MeIm), and the bis- cis-imidazole complex, Cu(II)(2-MeIm)2(OAc)2. The ESEEM was collected at the maximum ESE amplitude in the EPR spectrum, and at a  value of 310 ns. ESEEM at different  and microwave frequency/magnetic field values has previously been reported for the Cu(II)(dien)(2-MeIm) complex.122 The ESEEM in Figure 4.3.1.1 exhibits a pattern of deep and sustained modulation in the time domain, and corresponding narrow lines in the frequency domain, which is characteristic of coupling to 14N under the condition of exact cancellation, and specifically, to the remote nitrogen of imidazole.123- 124 The exact cancellation condition holds when the 14N superhyperfine and 14N nuclear Zeeman contributions approximately cancel for one electron spin manifold (A/2≈N, where N is the free nuclear frequency), which creates a near zero-field condition in one electron spin manifold (the ms=+1/2, or ‐, manifold, for Aiso>0). The energy level separations in this manifold are dominated by the nuclear quadrupole interactions.
Sample 1
AutoNDA by SimpleDocs

Related to Model Complexes

  • Budget For Tenant Improvements A preliminary detailed breakdown by trade of the costs incurred or that will be incurred in connection with the design and construction of the Tenant Improvements is set forth on Schedule 3 attached hereto (the “Budget”). The Budget is based upon the TI Construction Drawings approved by Tenant and shall include a payment to Landlord of administrative rent (“Administrative Rent”) equal to 1.5% of the TI Costs, which Administrative Rent shall include, without limitation, all out-of-pocket costs, expenses and fees incurred by or on behalf of Landlord arising from, out of, or in connection with monitoring the construction of the Tenant Improvements and Changes, and shall be payable out of the TI Fund. Landlord shall provide Tenant with a final Budget promptly following approval of the TI Construction Drawings by Landlord and Tenant. The Budget shall be subject to Tenant’s review and approval which approval shall not be unreasonably withheld, conditioned or delayed by Tenant. Tenant shall have the right to approve any use of the contingency in the Budget by Landlord; provided, however, that, Tenant’s approval shall not be unreasonably withheld, conditioned or delayed, and the contingency shall not be available for use by Tenant for any Changes until all unforeseen conditions, changes to resulting from governmental agencies and the like have first been paid for out of the contingency.

  • Expansion Effective on and as of December 1, 2017 (such date being the -Expansion Commencement Date”), the Premises shall be expanded to include an additional 7,389 square feet of rentable area designated as Suite 100 of the Building (the “Expansion Space”), being more fully shown and described on the floor plan attached hereto as Exhibit A and made a part hereof for all purposes, for a term that is coterminous with the Lease Term. Tenant acknowledges that the Expansion Space is currently occupied by an existing tenant (the “Existing Tenant”) and that Landlord and such Existing Tenant are concurrently herewith entering into an early termination agreement to terminate such Existing Tenant’s lease as of November 30, 2017. Tenant hereby waives any claims against Landlord in the event that such Existing Tenant holds over in the Premises beyond the Expansion Commencement Date. If such Existing Tenant holds over in the Expansion Space beyond the Expansion Commencement Date, the Expansion Commencement Date, and Xxxxxx’s obligation to commence paying rent with respect to the Expansion Space, shall nonetheless still commence on the Expansion Commencement Date. Following such Existing Tenant surrendering the Expansion Space to Landlord, Landlord shall thereafter deliver the same to Tenant. Upon the Expansion Commencement Date, Landlord may prepare and deliver to Tenant a certificate establishing the Expansion Commencement Date, which Tenant shall acknowledge by executing a copy and returning it to Landlord within ten (10) business days after its receipt from Landlord. Failure of Landlord to send any such certificate shall have no effect on the Expansion Commencement Date. In the event there is any delay in the delivery of the Expansion Space to Tenant (including, without limitation, due to the Existing Tenant holding over in the Expansion Space past the expiration of its lease), then this First Amendment shall not be void or voidable, nor shall Landlord be liable to Tenant for any loss or damage resulting therefrom. Xxxxxx has advised Landlord that it intends to permit Existing Tenant continue to occupy the Expansion Space through December 15, 2017, and Landlord hereby consents to Tenant permitting Existing Tenant to remain the Expansion Space through such date; provided, however, the Expansion Commencement Date, and Tenant’s obligation to commence paying rent with respect to the Expansion Space, shall commence on the Expansion Commencement Date.

  • Projects The Annexes attached hereto describe the specific projects and the policy reforms and other activities related thereto (each, a “Project”) that the Government will carry out, or cause to be carried out, in furtherance of this Compact to achieve the Objectives and the Compact Goal.

  • Development Work The Support Standards do not include development work either (i) on software not licensed from CentralSquare or (ii) development work for enhancements or features that are outside the documented functionality of the Solutions, except such work as may be specifically purchased and outlined in Exhibit 1. CentralSquare retains all Intellectual Property Rights in development work performed and Customer may request consulting and development work from CentralSquare as a separate billable service.

  • Building Renovations It is specifically understood and agreed that Landlord has made no representation or warranty to Tenant and has no obligation and has made no promises to alter, remodel, improve, renovate, repair or decorate the Premises, Building, or any part thereof and that no representations respecting the condition of the Premises or the Building have been made by Landlord to Tenant except as specifically set forth herein or in the Work Letter Agreement. However, Tenant hereby acknowledges that Landlord is currently renovating or may during the Lease Term renovate, improve, alter, or modify (collectively, the "Renovations") the Project, the Building and/or the Premises including without limitation the parking structure, common areas, systems and equipment, roof, and structural portions of the same, which Renovations may include, without limitation, (i) installing sprinklers in the Building common areas and tenant spaces, (ii) modifying the common areas and tenant spaces to comply with applicable laws and regulations, including regulations relating to the physically disabled, seismic conditions, and building safety and security, and (iii) installing new floor covering, lighting, and wall coverings in the Building common areas, and in connection with any Renovations, Landlord may, among other things, erect scaffolding or other necessary structures in the Building, limit or eliminate access to portions of the Project, including portions of the common areas, or perform work in the Building, which work may create noise, dust or leave debris in the Building. Tenant hereby agrees that such Renovations and Landlord's actions in connection with such Renovations shall in no way constitute a constructive eviction of Tenant nor entitle Tenant to any abatement of Rent. Landlord shall have no responsibility or for any reason be liable to Tenant for any direct or indirect injury to or interference with Tenant's business arising from the Renovations, nor shall Tenant be entitled to any compensation or damages from Landlord for loss of the use of the whole or any part of the Premises or of Tenant's personal property or improvements resulting from the Renovations or Landlord's actions in connection with such Renovations, or for any inconvenience or annoyance occasioned by such Renovations or Landlord's actions.

  • Condominiums/Planned Unit Developments If the Mortgaged Property is a condominium unit or a planned unit development (other than a de minimis planned unit development) such condominium or planned unit development project such Mortgage Loan was originated in accordance with, and the Mortgaged Property meets the guidelines set forth in the Originator's Underwriting Guidelines;

  • Project Completion Part 1 – Material Completion

  • Phase II A small portion of the work for the Phase II modifications to the Plattsburgh Substation will be performed by Transmission Owner, and the remainder will be performed by Clinton and Xxxxxxxxx. A detailed definition of the specific scope for Transmission Owner and Clinton and Xxxxxxxxx including interface points shall be defined during the design phase and, as such documents become available, copies will be delivered to the NYISO, Transmission Owner, Noble Altona Windpark, LLC and Marble River, LLC. The full scope includes the installation of wave traps, CCVT’s and modifications and/or additions to relaying on the MWP-1 and MWP- 2 lines. These lines will be reconfigured at the completion of Phase II to connect to Xxxxx and Xxxxxxx Substations on MWP-1 and the Xxxx Substation on MWP-2. Clinton and Xxxxxxxxx will design the upgrades and purchase the materials based on the outline specification that was prepared and issued by Transmission Owner. The work to be performed by Clinton and Xxxxxxxxx will include both the materials for the exterior and interior installations and items for Transmission Owner installation inside the control building in existing relay panels and communication racks. In addition, Clinton and Xxxxxxxxx will be responsible for the exterior and interior construction work and will provide construction management services in coordination with Transmission Owner. The civil design for the foundations and the electrical design for the cable runs to the control room will be designed by, as approved by Transmission Owner, and installed under the supervision and control of Clinton and Xxxxxxxxx. The equipment will be selected and procured in accordance with the specifications developed during the detailed engineering phase, copies of which shall be furnished to the NYISO, Transmission Owner, Noble Altona Windpark, LLC and Marble River, LLC. The construction of the foundations, structures, wave traps, CCTV and cable runs into the control building to the termination cabinets will be completed by Clinton and Xxxxxxxxx. The work at the Plattsburgh Substation will be installed under Transmission Owner’s CPP-1. Transmission Owner will provide Protection and Controls Engineering, install and terminate wiring from the termination cabinets to the control panels and relays, install relays and equipment in the existing panels, and will commission such work inside the 230kV control building. Transmission Owner will develop the communications protocols and data flow over the circuits.

  • Site Lands or areas indicated in the Contract Documents as being furnished by the Owner upon which the Work is to be performed, including rights-of-way and easements for access thereto, and such other lands furnished by the Owner that are designated for the use of the Contractor. Also referred to as Project Site, Job Site and Premises.

Time is Money Join Law Insider Premium to draft better contracts faster.