Floor Load Tenant shall not place a load upon any floor of the Premises that exceeds 50 pounds per square foot “live load”. Landlord reserves the right to reasonably designate the position of all Equipment which Tenant wishes to place within the Premises, and to place limitations on the weight thereof.
Mileage Measurement Where required, the mileage measurement for LIS rate elements is determined in the same manner as the mileage measurement for V&H methodology as outlined in NECA Tariff No. 4.
Local Circuit Switching Capability, including Tandem Switching Capability 4.1.3.1 Definition 4.1.3.2 Notwithstanding BellSouth’s general duty to unbundle local circuit switching, BellSouth shall not be required to unbundle local circuit switching for <<customer_name>> when <<customer_name>> serves end-users with four (4) or more voice-grade (DS-0) equivalents or lines in locations served by BellSouth’s local circuit switches, which are in the following MSAs: Atlanta, GA; Miami, FL; Orlando, FL; Ft. Lauderdale, FL; Charlotte-Gastonia-Rock Hill, NC; Greensboro-Winston Salem-High Point, NC; Nashville, TN; and New Orleans, LA, and BellSouth has provided non-discriminatory cost based access to the Enhanced Extended Link (EEL) throughout Density Zone 1 as determined by NECA Tariff No. 4 as in effect on January 1, 1999. 4.1.3.3 In the event that <<customer_name>> orders local circuit switching for a single end user account name at a single physical end user location with four (4) or more 2-wire voice-grade loops from a BellSouth central office in an MSA listed above, BellSouth shall charge <<customer_name>> the market based rate in Exhibit C for use of the local circuit switching functionality for the affected facilities. 4.1.3.4 A featureless port is one that has a line port, switching facilities, and an interoffice port. A featured port is a port that includes all features then capable or a number of then capable features specifically requested by <<customer_name>>. Any features that are not currently then capable but are technically feasible through the switch can be requested through the NBR/BFR process. 4.1.3.5 BellSouth will provide to <<customer_name>> customized routing of calls: (i) to a requested directory assistance services platform; (ii) to an operator services platform pursuant to Section 10 of Attachment 2; (iii) for <<customer_name>>’s PIC’ed toll traffic in a two (2) PIC environment to an alternative OS/DA platform designated by <<customer_name>>. <<customer_name>> customers may use the same dialing arrangements as BellSouth customers. 4.1.3.6 Remote Switching Module functionality is included in Switching Capability. The switching capabilities used will be based on the line side features they support. 4.1.3.7 Switching Capability will also be capable of routing local, intraLATA, interLATA, and calls to international customer’s preferred carrier; call features (e.g. call forwarding) and Centrex capabilities. 4.1.3.8 Where required to do so in order to comply with an effective Commission order, BellSouth will provide to <<customer_name>> purchasing local BellSouth switching and reselling BellSouth local exchange service under Attachment 1, selective routing of calls to a requested directory assistance services platform or operator services platform. <<customer_name>> customers may use the same dialing arrangements as BellSouth customers, but obtain a <<customer_name>> branded service.
Configuration The configuration for the Purchase Right Aircraft will be the Detail Specification for Model 767-3S2F aircraft at the revision level in effect at the time of the Supplemental Agreement. Such Detail Specification will be revised to include (i) changes required to obtain required regulatory certificates and (ii) other changes as mutually agreed upon by Boeing and Customer.
Stability Testing Patheon may be requested to conduct stability testing on the Products in accordance with the protocols set out in the Specifications for the separate fees and during the time periods set out in Schedule C to a Product Agreement. Patheon will not make any changes to these testing protocols without prior written approval from Client. If a confirmed stability test failure occurs, Patheon will notify Client within one Business Day, after which Patheon and Client will jointly determine the proceedings and methods to be undertaken to investigate the cause of the failure, including which party will bear the cost of the investigation. Patheon will not be liable for these costs unless it has failed to perform the Manufacturing Services in accordance with the Specifications, cGMPs, and Applicable Laws. Patheon will give Client ail stability test data and results at Client’s request.
Loop Provisioning Involving Integrated Digital Loop Carriers 2.6.1 Where Xxxx has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to Xxxx. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for Xxxx (e.g. hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross Connect System (DACS)- door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non- designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from Xxxx, and if agreed to by both Parties, BellSouth may utilize its Special Construction (SC) process to determine the additional costs required to provision facilities. Xxxx will then have the option of paying the one-time SC rates to place the Loop.
Check Meters Developer, at its option and expense, may install and operate, on its premises and on its side of the Point of Interconnection, one or more check meters to check Connecting Transmission Owner’s meters. Such check meters shall be for check purposes only and shall not be used for the measurement of power flows for purposes of this Agreement, except as provided in Article 7.4 below. The check meters shall be subject at all reasonable times to inspection and examination by Connecting Transmission Owner or its designee. The installation, operation and maintenance thereof shall be performed entirely by Developer in accordance with Good Utility Practice.
MODELDOCUMEN In consideration of, and conditioned upon the payment to Contractor of the sum of $ _ under the aforementioned Application for Payment, Contractor hereby unconditionally releases and forever discharges Princeton University and its respective officers, directors, agents, and representatives, and Princeton University’s premises and property, from all claims for payment, liens and obligations of every nature, whether xxxxxx or inchoate and including without limitation all mechanics’ and materialmen’s liens, construction liens and other liens and claims now, or which in the future may be owned, claimed or asserted by Contractor against the aforesaid land and improvements (including personal property related thereto) or against Princeton University arising out of or in connection with the performance of the said Contract and all amendments thereto up to the date hereof (other than retainage). Executed this date: _ by _/Form signed and dated by Contractor/ With reference to Subcontractor Application for Payment No. dated in the amount of $ submitted under Subcontract No. by and between (“Subcontractor”) and _ (“Contractor”) for _ work for the construction of _ (the “Project”), the undersigned Subcontractor hereby certifies and represents that it has received full payment for, and that it has made full payment to all of its subcontractors and materialmen for all costs, charges and expenses incurred by it or by them on its behalf, for work, labor, services, materials and equipment supplied to the foregoing premises and/or used in connection with the Work under said Subcontract through and including the effective date of Subcontractor’s last application for payment (excluding retainage). Subcontractor further certifies that to its best knowledge and belief, each of its subcontractors and materialmen has made full payment of all costs, charges and expenses incurred by them or on their behalf for work labor, services materials and equipment supplied to the foregoing premises and/or used by them in connection with the Subcontractor’s work under said Subcontract, up to the effective date of Subcontractor’s last application for payment (excluding retainage). Prior to the date of this Release, the Undersigned further certifies that it has received payments from the Contractor that total $ _. In consideration of, and conditioned upon the payment to Subcontractor of, the payment of the sum of $ under Subcontractor Application for Payment No. , the Subcontractor hereby unconditionally releases and forever discharges the Princeton University and the Contractor and their affiliates and their respective officers, directors, agents, and representatives and Princeton University’s premises and property from all claims, liens and obligations of every nature arising out of or in connection with the performance of the said Subcontract and all amendments thereto on account of materials and/or labor furnished up to the date hereof (other than retainage). Executed this date: _ by _/Form signed and dated by Subcontractor/ With reference to Contract No. as amended, by and between The Trustees of Princeton University (“Princeton University”) and (“Contractor”) for construction of (the “Project”); Contractor hereby certifies and represents that, conditioned upon payment of the sum of $ pursuant to its Application for Final Payment dated _, it has received full payment of all costs, charges and expenses incurred by it or on its behalf for work, labor, services, materials and equipment supplied to the foregoing premises and/or used in connection with its Work under said Contract. In consideration of and conditioned upon the payment of the final payment as set forth above, Contractor hereby unconditionally releases and forever discharges Princeton University and its officers, directors, agents and representatives, and Princeton University’s premises and property, from all claims and causes of action, and all mechanics’ and materialmen’s liens, construction liens and other liens, that now or that in the future may be owned, claimed or asserted by Contractor against Princeton University, or the aforesaid land and improvements (including personal property related thereto), arising out of or in connection with the performance of the said Contract and all amendments thereto.
Model List your model number of the product you are bidding.
Fleet In general, any in-house mechanic may be assigned to respond to any emergency during normal working hours in any of the three operating companies. (This does not supersede the Mechanic Personnel Working Across 309 Jurisdictional Boundaries Agreement dated October 4, 2007). Example 1: Lincoln (CILCO) unit breaks down in the northern part of its territory. It would make sense for the Bloomington (rp) mechanic to respond to the service call. Lincoln staffs a 2nd shift mechanic only and the vehicle in need of repair is closer to the Bloomington garage. This example covers areas that both have Ameren in-house mechanics. Example 2: Any CIPS 702 units could be repaired by Ameren staffed mechanics in 702 territories. This would generally happen in areas that are in close proximity to an IP or CILCO garage. This example covers 702 CIPS areas that do not have Ameren in-house mechanics. These jobs currently are outsourced. Perform Preventive Maintenance on CIPS 702 equipment at individual operating centers where advantageous. This work is currently outsourced. It is not the company’s intent to perform all PM’s with in-house mechanics.
