Newly Available Additional Courses Sample Clauses

Newly Available Additional Courses. An academically qualified, non-probationary Lecturer who has been employed in a Track A appointment (other than a Teaching Fellow appointment) in at least one of the preceding three (3) quarters of the academic year shall have the right of first refusal to teach any additional sections of courses or individual courses that become available within the same appointive unit after the date that Letters of Appointment have been issued (consistent with Article 12, Appointments) prior to any Track B Lecturer or newly hired Lecturers, provided the Track A Lecturer has a satisfactory performance review. Because more than one Track A Lecturer may be qualified for the same course, the academic unit will, by email communication, simultaneously call for assignments from all qualified Track A Lecturers, provide a due date for responses, and assign the course to the Lecturer who first responds in the affirmative. If no responses are received within the time period provided for in the call for assignments, the academic unit shall offer the course to other lecturers who have previously taught substantially similar courses successfully in the past who are currently employed prior to assigning the course to an individual outside the bargaining unit, subject to any workload limitations set forth in Article 11, Workload, Courses, Duties.
Sample 1Sample 2
AutoNDA by SimpleDocs

Related to Newly Available Additional Courses

  • Additional Requirements for Sleeping Rooms The Contractor shall provide departing Attendees a secured area for storing belongings.

  • Reasonable Additional Hours All hours worked over an average of 38 ordinary hours per week, will be deemed to be additional hours. All hours worked by part-time employees beyond their guaranteed minimum number of hours will be treated as additional hours for the purpose of this subclause. From time to time, full time employees may be required to work a reasonable amount of additional hours. Part time employees may be asked, but not required, to work a reasonable number of additional hours. All additional hours worked will be paid in accordance with this Agreement. An employee may not be required to work additional hours in circumstances where the working of additional hours would result in the employee working hours which are unreasonable having regards to (refer to section 62 of the Act): (a) any risk to employee health and safety from working the additional hours; (b) the employee's personal circumstances, including family responsibilities; (c) the needs of the workplace or enterprise in which the employee is employed; (d) whether the employee is entitled to receive overtime payments, penalty rates or other compensation for, or a level of remuneration that reflects an expectation of, working additional hours; (e) any notice given by the employer of any request or requirement to work the additional hours; (f) any notice given by the employee of his or her intention to refuse to work the additional hours; (g) the usual patterns of work in the industry, or the part of an industry, in which the employee works; (h) the nature of the employee's role, and the employee's level of responsibility; (i) whether the additional hours are in accordance with averaging terms included under section 63 in a modern award or enterprise agreement that applies to the employee, or with an averaging arrangement agreed to by the employer and employee under section 64; (j) any other relevant matter.

  • Price Adjustments for OGS Centralized Contracts Periodic price adjustments will occur no more than twice per year on a schedule to be established solely by OGS. Pricing offered shall be fixed for the first twelve (12) months of the Contract term. Such price increases will only apply to the OGS Centralized Contracts and shall not be applied retroactively to Authorized User Agreements or any Mini-bids already submitted to an Authorized User. Price decreases may be made at any time. Additionally, some price decreases shall be calculated in accordance with Appendix B, section 17, Pricing.

  • Modifications and Updates to the Wire Center List and Subsequent Transition Periods 5.4.6.1 In the event AT&T identifies additional wire centers that meet the criteria set forth in Sections 5.4.2.1 or 5.4.2.2 above, but that were not included in the Master List of Unimpaired Wire Centers or AT&T’s List of Unimpaired Wire Centers, AT&T shall include such additional wire centers in a CNL. Each such list of additional wire centers shall be considered a Subsequent Wire Center List. AT&T will follow any limitations on the frequency with which it may issue such lists and notification procedures set forth in applicable Commission orders. 5.4.6.2 TWTC shall have thirty (30) business days to dispute the additional wire centers listed on AT&T’s CNL. Absent such dispute, effective thirty (30) business days after the date of a AT&T CNL providing a Subsequent Wire Center List, AT&T shall not be required to provide DS1 and DS3 Dedicated Transport, as applicable, in such additional wire center(s), except pursuant to the self-certification process as set forth in Section 1.9.1 of this Attachment. 5.4.6.3 For purposes of Section 5.4.6.1 above, AT&T shall make available DS1 and DS3 Dedicated Transport that were in service for TWTC in a wire center on the Subsequent Wire Center List as of the thirtieth (30th) business day after the date of AT&T’s CNL identifying the Subsequent Wire Center List (Subsequent Embedded Base) until one hundred eighty (180) days after the thirtieth (30th) business day Version: 4Q06 Standard ICA 11/30/06 from the date of AT&T’s CNL identifying the Subsequent Wire Center List (Subsequent Transition Period). 5.4.6.4 The rates set forth in Exhibit B shall apply to the Subsequent Embedded Base during the Subsequent Transition Period. 5.4.6.5 No later than one hundred eighty (180) days from AT&T’s CNL identifying the Subsequent Wire Center List, TWTC shall submit an LSR(s) or spreadsheet(s) as applicable, identifying the Subsequent Embedded Base of circuits to be disconnected or converted to other AT&T services. 5.4.6.5.1 In the case of disconnection, the applicable disconnect charges set forth in this Agreement shall apply. 5.4.6.5.2 If TWTC chooses to convert DS1 and/or DS3 Dedicated Transport to special access circuits in existence as of the Effective Date of this Agreement, AT&T will include such DS1 and/or DS3 Dedicated Transport within TWTC’s total special access circuits, and apply any discounts to which TWTC is entitled from the transition period of 3/11/2006 to the conversion date. Conversions will be subject to the switch-as-is charge set forth in Exhibit A to this Attachment 2. 5.4.6.5.3 AT&T shall not impose disconnect or nonrecurring installation charges when transitioning the Subsequent Embedded Base of DS1 and DS3 Dedicated Transport in existence as of the Effective Date of this Agreement. 5.4.6.6 If TWTC fails to submit the LSR(s) or spreadsheet(s) for all of its Subsequent Embedded Base by one hundred eighty (180) days after the date of AT&T’s CNL identifying the Subsequent Wire Center List, AT&T will identify TWTC’s remaining Subsequent Embedded Base, if any, and will transition such circuits to the equivalent tariffed AT&T service(s), or in the case of Georgia, to the equivalent 271 service(s) set forth in Exhibit 1. In the states of Florida, Kentucky, Mississippi and South Carolina, those circuits identified and transitioned by AT&T shall be subject to the applicable disconnect charges as set forth in this Agreement and the full nonrecurring charges for installation of the equivalent tariffed AT&T service as set forth in AT&T’s tariffs. In the states of Alabama, Georgia, North Carolina and Tennessee, those circuits identified and transitioned by AT&T shall be subject to the applicable switch-as-is rates set forth in Exhibit A of Attachment

  • Underground Tanks If underground or other storage tanks storing Hazardous Materials located on the Premises or the Project are used by Tenant or are hereafter placed on the Premises or the Project by Tenant, Tenant shall install, use, monitor, operate, maintain, upgrade and manage such storage tanks, maintain appropriate records, obtain and maintain appropriate insurance, implement reporting procedures, properly close any underground storage tanks, and take or cause to be taken all other actions necessary or required under applicable state and federal Legal Requirements, as such now exists or may hereafter be adopted or amended in connection with the installation, use, maintenance, management, operation, upgrading and closure of such storage tanks.

  • Books and Records; Certain Funds Received After the Cut-Off Date From and after the sale of the Mortgage Loans to the Purchaser, record title to each Mortgage (other than with respect to any Outside Serviced Mortgage Loan) and each Note shall be transferred to the Trustee subject to and in accordance with this Agreement. Any funds due after the Cut-Off Date in connection with a Mortgage Loan received by the Seller shall be held in trust on behalf of the Trustee (for the benefit of the Certificateholders) as the owner of such Mortgage Loan and shall be transferred promptly to the Certificate Administrator. All scheduled payments of principal and interest due on or before the Cut-Off Date but collected after the Cut-Off Date, and all recoveries and payments of principal and interest collected on or before the Cut-Off Date (only in respect of principal and interest on the Mortgage Loans due on or before the Cut-Off Date and principal prepayments thereon), shall belong to, and shall be promptly remitted to, the Seller. The transfer of each Mortgage Loan shall be reflected on the Seller’s balance sheets and other financial statements as the sale of such Mortgage Loan by the Seller to the Purchaser. The Seller intends to treat the transfer of each Mortgage Loan to the Purchaser as a sale for tax purposes. Following the transfer of the Mortgage Loans by the Seller to the Purchaser, the Seller shall not take any actions inconsistent with the ownership of the Mortgage Loans by the Purchaser and its assignees. The transfer of each Mortgage Loan shall be reflected on the Purchaser’s balance sheets and other financial statements as the purchase of such Mortgage Loan by the Purchaser from the Seller. The Purchaser intends to treat the transfer of each Mortgage Loan from the Seller as a purchase for tax purposes. The Purchaser shall be responsible for maintaining, and shall maintain, a set of records for each Mortgage Loan which shall be clearly marked to reflect the transfer of ownership of each Mortgage Loan by the Seller to the Purchaser pursuant to this Agreement. It is expressly agreed and understood that, notwithstanding the assignment of the Loan Documents, it is expressly intended that the Seller will receive the benefit of any securitization indemnification provisions in the Loan Documents.

  • FUNDS AVAILABLE UNDER THE CONTRACTS ALL SERIES I SHARES AND SERIES II SHARES OF AIM VARIABLE INSURANCE FUNDS (INVESCO VARIABLE INSURANCE FUNDS)

  • Disbursements for Site Improvements All payments made by the OPWC for site improvements or other work shall be made directly to the Contractor that performed the work and originated the invoice, unless the request is for disbursement to the Recipient.

  • Unbundled Loop Modifications (Line Conditioning 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Subloop that may diminish the capability of the Loop or Subloop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the BellSouth’s TR 73600 Unbundled Local Loop Technical Specification. 2.5.2 BellSouth will remove load coils only on copper Loops and Subloops that are less than eighteen thousand (18,000) feet in length. 2.5.3 For any copper loop being ordered by NewPhone which has over six thousand (6,000) feet of combined bridged tap will be modified, upon request from NewPhone, so that the loop will have a maximum of six thousand (6,000) feet of bridged tap. This modification will be performed at no additional charge to NewPhone. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper Loop that will result in a combined total of bridged tap between two thousand five hundred (2,500) and six thousand (6,000) feet will be performed at the rates set forth in Exhibit A. 2.5.4 NewPhone may request removal of any unnecessary and non-excessive bridged tap (bridged tap between zero (0) and two thousand five hundred (2,500) feet which serves no network design purpose), at rates pursuant to BellSouth’s SC Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If NewPhone requests ULM on a reserved facility for a new Loop order, BellSouth may perform a pair change and provision a different Loop facility in lieu of the reserved facility with ULM if feasible. The Loop provisioned will meet or exceed specifications of the requested Loop facility as modified. NewPhone will not be charged for ULM if a different Loop is provisioned. For Loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the Loop provisioned. 2.5.8 NewPhone shall request Loop make up information pursuant to this Attachment prior to submitting a service inquiry and/or a LSR for the Loop type that NewPhone desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for NewPhone, NewPhone will submit a SI to BellSouth. If a spare Loop facility that meets the Loop modification specifications requested by NewPhone is available at the location for which the ULM was requested, NewPhone will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, NewPhone will not be charged for ULM but will only be charged the service order charges for submitting an order.

  • UNDERGROUND LOCATIONS Prior to the Company commencing any work the Customer must advise the Company of the precise location of all underground services on the site and clearly xxxx the location. The underground mains and services the Customer must identify include, but are not limited to, telephone cables, fibre optic cables, electrical services, gas services, sewer services, pumping services, sewer connections, sewer sludge mains, water mains, irrigations pipes, oil pumping mains and any other services that may be on site. Whilst the Company will take all care to avoid damage to any underground services the Customer agrees to indemnify the Company in respect of all any liability claims, loss, damage, cost and fines as a result of damage to services not precisely located and notified pursuant to this clause.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!