Contractor’s Obligations Pursuant to this contract, the Contractor agrees to provide the specific services detailed herein and shall be responsible for the following:
Developer’s Obligations 7.1.1 In consideration of the Rights hereby granted, the Developer shall pay to the Authority an annual fee of Rs. /- (Rupees only) (“Fee”) commencing from the 1st (first) anniversary of Appointed Date. The Fee is exclusive of GST and all other applicable taxes and shall be payable by the Developer at actual over and above the Fee. The Fee is payable to the Authority on or before 30 (thirty) days prior to the start of every year in advance as set out in Schedule 1 throughout the Agreement Period. During the Agreement Period the Fee shall be increased by 5% (five percent) every year over the previous year’s Fee on compounded basis.
7.1.2 The Developer should pay the Fee to the Authority notwithstanding the fact that, the development of Project Facilities is not completed within the specified period or Developer does not start the commercial operation of the Project. In other words, the Developer shall not be entitled to seek any reduction of Fee, claim, damages, compensation or any other consideration from the Authority on account of any reason.
7.1.3 Any delay in payment of the Fee shall attract an interest for the delayed period at the rate of SBI PLR plus 5% per annum on the outstanding amount, which shall be due from the date of such payment till the amount is realized by the Authority. In addition to the foregoing, any delay in payment of Fee beyond a period of 60 (sixty) days from the due date of such payment will be construed to be Material Breach under this Agreement.
Vendor’s Obligations Vendor shall incur no further obligations in connection with the terminated work and on the date set in the notice of termination Vendor will stop work to the extent specified. Vendor shall also terminate outstanding orders and subcontracts as they relate to the terminated work. Vendor shall settle the liabilities and claims arising out of the termination of subcontracts and orders connected with the terminated work. The MTC or designee may direct Vendor to assign Vendor’s right, title, and interest under terminated orders or subcontracts to the MTC. Vendor must still complete the work not terminated by the notice of termination and may incur obligations as are necessary to do so.
Licensors Obligations 4.5.1. Xxxxx the Licensee the right to use the intellectual property (the Service) as in the Agreement. Ensure 24/7 availability of the Service, apart from preventive maintenance time.
4.5.2. Keep confidential any information, materials, documents which become available to the Licensee in the course of performance of this Agreement.
4.5.3. Duly publish the official messages (documents) related to the right to use the Service.
Obligations of the Contractor (i) Subject to and on the terms and conditions of this Agreement, the Contractor shall undertake the survey, investigation, design, engineering, procurement, construction, and maintenance of the Project Highway and observe, fulfil, comply with and perform all its obligations set out in this Agreement or arising hereunder.
(ii) The Contractor shall comply with all Applicable Laws and Applicable Permits (including renewals as required) in the performance of its obligations under this Agreement.
(iii) Subject to the provisions of Clauses 4.1 (i) and 4.1 (ii), the Contractor shall discharge its obligations in accordance with Good Industry Practice and as a reasonable and prudent person.
(iv) The Contractor shall remedy any and all loss, defects, or damage to the Project Highway from the Appointed Date until the end of the Construction Period at the Contractor’s cost, save and except to the extent that any such loss, defect, or damage shall have arisen from any wilful default or neglect of the Authority.
(v) The Contractor shall remedy any and all loss, defect or damage to the Project Highway during the Defects Liability Period at the Contractor’s cost to the extent that such loss, defect or damage shall have arisen out of the reasons specified in Clause 17.3.
(vi) The Contractor shall remedy any and all loss or damage to the Project Highway during the Maintenance Period at the Contractor’s cost, including those stated in Clause 14.1 (ii), save and except to the extent that any such loss or damage shall have arisen on account of any wilful default or neglect of the Authority or on account of a Force Majeure Event.
(vii) The Contractor shall, at its own cost and expense, in addition to and not in derogation of its obligations elsewhere set out in this Agreement:
(a) make, or cause to be made, necessary applications to the relevant Government Instrumentalities with such particulars and details as may be required for obtaining Applicable Permits set forth in Schedule-F and obtain and keep in force and effect such Applicable Permits in conformity with the Applicable Laws;
(b) procure, as required, the appropriate proprietary rights, licences, agreements and permissions for Materials, methods, processes and systems used or incorporated into the Project Highway;
(c) make reasonable efforts to maintain harmony and good industrial relations among the personnel employed byit or its Sub-contractors in connection with the performance of its obligations under this Agreement;
(d) ensure and procure that its Sub-contractors comply with all Applicable Permits and Applicable Laws in the performance by them of any of the Contractor’s obligations under this Agreement;
(e) not do or omit to do any act, deed or thing which may in any manner violate any provisions of this Agreement;
(f) support, cooperate with and facilitate the Authority in the implementation and operation of the Project in accordance with the provisions of this Agreement;
(g) ensure that the Contractor and its Sub-contractors comply with the safety and welfare measures for labour in accordance with the Applicable Laws and Good Industry Practice;
(h) keep, on Site, a copy of this Agreement, publications named in this Agreement, the Drawings, Documents relating to the Project, and Change of Scope orders and other communications given under this Agreement. The Authority’s Engineer and its authorised personnel shall have the right of access to all these documents at all reasonable times;
(i) cooperate with other contractors employed by the Authority and personnel of any public authority; and
(j) not interfere unnecessarily or improperly with the convenience of the public, or the access to and use and occupation of all roads and footpaths, irrespective of whether they are public or in the possession of the Authority or of others.
(viii) The Contractor shall undertake all necessary superintendence to plan, arrange, direct, manage, inspect and test the Works. The Contractor shall provide all necessary superintendence of the Works for the proper fulfilling of the Contractor's obligations under the Agreement. Such superintendence shall be given by competent person having adequate knowledge of the operations to be carried out (including the methods and techniques required, the hazards likely to be encountered and methods of preventing accidents) for the satisfactory and safe execution of the Works.
(ix) The Contractor shall obtain and maintain a project related bank account operational at site where all transactions related to the payment of work will be done. The Contractor shall submit a monthly account statement and a detailed report on utilization of funds transferred to this project related bank account to Authority’s Engineer. Notwithstanding anything contrary to this agreement, the authority, in the interest and to ensure timely completion of the work, reserves the right to audit such bank accounts to ensure that there is no diversion of funds from this project specific account to any other project being implemented by the Contractor.
(x) The Contractor shall provide the documents of the Contractor specified in the Agreement, and all Contractors' personnel; Goods, consumables and other things and services, whether of a temporary or permanent nature, required in and for the execution, completion of Works and remedying defects.
(xi) The Contractor shall perform the Works in conformity with the Project requirements and other requirements and standards prescribed under or pursuant to the Agreement.
(xii) The Contractor shall carry out such work incidental and contingent to the original Scope of the Project to comply with Good Industry Practices.
(xiii) The Contractor shall maintain required staff and necessary Contractor’s equipment and materials within the reach of the Site during the Defects Liability Period so that any defects arising are promptly attended.
Customer’s Obligations The Customer shall:
(a) provide the Supplier with:
(i) all necessary co-operation in relation to this agreement; and
(ii) all necessary access to such information as may be required by the Supplier; in order to render the Services, including but not limited to Customer Data, security access information and configuration services;
(b) comply with all applicable laws and regulations with respect to its activities under this agreement;
(c) carry out all other Customer responsibilities set out in this agreement in a timely and efficient manner. In the event of any delays in the Customer's provision of such assistance as agreed by the parties, the Supplier may adjust any agreed timetable or delivery schedule as reasonably necessary;
(d) ensure that the Authorised Users use the Services and the Documentation in accordance with the terms and conditions of this agreement and shall be responsible for any Authorised User’s breach of this agreement;
(e) obtain and shall maintain all necessary licences, consents, and permissions necessary for the Supplier, its contractors and agents to perform their obligations under this agreement, including without limitation the Services;
(f) ensure that its network and systems comply with the relevant specifications provided by the Supplier from time to time; and
(g) be solely responsible for procuring and maintaining its network connections and telecommunications links from its systems to the Supplier’s data centres, and all problems, conditions, delays, delivery failures and all other loss or damage arising from or relating to the Customer's network connections or telecommunications links or caused by the internet.
HIRER’S OBLIGATIONS a) The Hirer acknowledges having received the Vehicle in a clean condition, with a full fuel tank and full bottle of gas (if applicable). The Hirer will return the Vehicle in a clean condition with a full fuel tank and a full bottle of gas (if applicable, and subject to any pre-purchase fuel and/or pre- purchase gas option being taken), on the Return Date at the time and at the Return Point set out in the Rental Agreement.
b) The Hirer must ensure that all reasonable care is taken in handling and parking the Vehicle and that it is left securely locked when not in use.
c) The Hirer must ensure that the recommended levels are maintained with respect to the water in the radiator and battery, the oil and the tyre pressures of the Vehicle.
d) Smoking and/or animals (excluding registered guide or assistance dogs) are not permitted in the Vehicle at any time. If this condition is breached, the Hirer must pay to JUCY a cleaning fee determined by JUCY in its reasonable opinion and being not more than $250.
e) The Hirer must ensure that all Authorised Drivers comply with, and all Authorised Drivers shall be bound by, these terms and conditions and all Authorised Drivers must carry their driver’s licence with them when driving the Vehicle.
f) In the event of any new damage to the Vehicle, the Hirer must notify JUCY of the full circumstances of the damage as soon as practicable (being not more than 48 hours) from the time the Hirer has knowledge of the damage.
g) If there is an equipment defect or mechanical failure of the Vehicle during the Term of Hire, the Hirer must notify JUCY as soon as practicable, and in any event within 48 hours, from the time the Hirer has knowledge of the defect or failure to give JUCY the opportunity to rectify the problem during the Term of Hire. JUCY does not accept liability for any claims submitted after this period.
h) The Hirer must ensure that a copy of this Agreement is kept in the Vehicle throughout the Term of Hire and produced without delay for inspection on demand by an enforcement officer
i) The Hirer shall not:
i) drive or use the Vehicle (or permit the Vehicle to be driven or used) otherwise than in a prudent and cautious manner. For the purposes of these terms and conditions, a single Vehicle rollover shall be considered a breach of this clause 6(i) unless the Stress Free Plus excess reduction has been taken out;
SUPPLIER’S OBLIGATIONS 4.2.1 The Supplier shall be responsible for implementing all the necessary resources for the performance of its obligations under the Contract, with the exception of those specifically mentionedin the Contractas beingunder the responsibility of the Purchaser. The Supplier shall haveall of thematerials andtoolsneededfor theperformanceof the Contractandshall allocate qualified staff in sufficient numbers to perform the Contract within the contractual deadline. The Supplier shall ensureappropriatepersonneltraining andqualification andsubmitanyproof relating to such qualification upon Purchaser’s request. Within seven (7) days, at the latest, of the Contract coming into force, the Supplier shall appoint a staff member as aprojectmanager and shall inform the Purchaser accordingly. The project manager shall plan, coordinate and monitor all the Supply’sneedsin compliancewith the Contractandthe Good Industry Practices andshall be the Supplier’s contact person for the Purchaser.
4.2.2 The Supplier shall request from the Purchaser in a timely manner, any approvals and instructions needed for the correct performance of the Contract. If applicable, the Purchaser shall grant access to the site where the Supply is to be performed (the “Site”) and /or make available to the Supplier the materials and/or perform the works identified in the Contract.
4.2.3 The Supplier shall promptly remedy or shall ensure that its subcontractors promptly remedy any defects relating to the Supply noted during the abovementioned visits as well as any defect notified to it by the Purchaser concerning its performance.
4.2.4 The Supplier shall ensure that the Supply provided are fit for the purposes that may reasonablybeinferred from the Contractandinaccordancewith the timetableforperformance defined in the Contract. In any event the Supplier commitshimself toachieveperformance and results stipulated in the Contract. The performance deadlinesmay only be extended or reduced through an amendment to the Contract, in accordance with the provisions of Article
5.1. The Supply shall be delivered in a state of full completion with the complete Documentation associated therewith as well as all instructions, recommendations and other indications necessary in order for them to be used correctly and under the appropriate safety conditions. “Documentation” shall mean any operation and maintenance manuals, drawings, calculations, technical data, logic diagrams, progress reports, quality documentation, conformity certificates, test reports, bill of lading, certificates of origin, export control classification list number as per any applicable export regulation - such as (i) the European Council Regulation 428/2009 (as amended), (ii) the U.S. Export Administration Regulations (“EAR”), (iii) percentage of U.S. origin content, (iv) U.S. Export Control Classification Number (“ECCN”), (v) U.S. Munitions List category (“USML”),(vi) (if applicable) export authorizations and licenses, and/or (vii) Harmonized Tariff Code - and any such other documents required under the Contract and/or applicable laws. The Supplier shall also furnish such programme of design, manufacture and delivery as the Purchaser may reasonably require. If so required by the Purchaser, the Supplier shall submit any such Documentation to the Purchaser with sufficient time for review and approval. Where the Documentation provided by the Supplier is not compliant with Purchaser’s contractual requirements, the Supplier must make the necessary modifications, and indemnify the Purchaser for any costs, liabilities or penalties incurred by the Purchaser due to the delays or non-compliance in Documentation delivered by the Supplier and shall not be entitled to an adjustment of the delivery schedule in case of any revision.
Processor’s Obligations Except where expressly permitted by Article 28 (3)(a) GDPR, Processor shall process data subjects’ Data only within the scope of the Agreement and the instructions issued by Controller. Where Processor believes that an instruction would be in breach of applicable law, Processor shall notify Controller of such belief without undue delay. Processor shall be entitled to suspend performance on such instruction until Controller confirms or modifies such instruction. Processor shall, within Processor’s scope of responsibility, organize Processor’s internal organization so it satisfies the specific requirements of data protection. Processor shall implement technical and organizational measures to ensure the adequate protection of Controller’s Data, which measures shall fulfil the requirements of the GDPR and specifically its Article 32. Processor shall implement technical and organizational measures and safeguards that ensure ongoing confidentiality, integrity, availability and resilience of processing systems and services and shall implement a process for regularly testing, assessing and evaluating the effectiveness of technical and organizational measures for ensuring the security of the processing. Controller is familiar with these technical and organizational measures, and it shall be Controller’s responsibility that such measures ensure a level of security appropriate to the risk. The parties agree to refer to the existing certification of Processor by Kiwa International Cert GmbH in accordance with DIN ISO/IEC 27001:2015 which is considered sufficient evidence for these purposes by Controller and which is available on the website of Processor (xxx.xxxxxxx.xxx). Processor reserves the right to modify the measures and safeguards implemented, provided, however, that that the level of security shall not be less protective than initially agreed upon. Processor shall support Controller, insofar as is agreed upon by the parties, and where possible for Processor, in fulfilling data subjects’ requests and claims, as detailed in chapter III of the GDPR and in fulfilling the obligations enumerated in Articles 33 to 36 GDPR. Processor shall ensure that all employees involved in Contract Processing of Controller’s Data and other such persons as may be involved in Contract Processing within Processor’s scope of responsibility shall only do so within the scope of the instructions. Furthermore, Processor shall ensure that any person entitled to process Data on behalf of Controller has undertaken a commitment to confidentiality under terms similar to the confidentiality terms of the Agreement. All such confidentiality obligations shall survive the termination or expiration of such Contract Processing. Processor shall notify Controller without undue delay if Processor becomes aware of any Data breaches within Processor’s scope of responsibility. Processor shall implement the measures necessary for securing Data and for mitigating potential negative consequences for the data subject; the Processor shall coordinate such efforts with Controller without undue delay. Processor shall notify to Controller the point of contact for any issues related to data protection arising out of or in connection with the Agreement. The Exhibit provides for a list of the initially designated persons. Processor shall correct or erase Data if so instructed by Controller and where covered by the scope of the instructions permissible. Where an erasure, consistent with data protection requirements, or a corresponding restriction of processing is impossible, Processor shall, based on Controller’s instructions, and unless agreed upon differently in the Agreement, destroy, in compliance with data protection requirements, all carrier media and other material or return the same to Controller. In specific cases designated by Controller, such Data shall be stored or handed over. The associated cost for doing so and protective measures to put in place shall be agreed upon separately, unless already agreed upon in the Agreement. Processor shall, upon termination of Contract Processing and upon Controller’s instruction, return all Data, carrier media and other materials to Controller or delete the same. Where a data subject asserts any claims against Controller in accordance with Article 82 of the GDPR, Processor shall support Controller in defending against such claims, where possible at Controller’s cost as set out in Section 6 para. 3. Controller shall notify Processor without undue delay, and comprehensively, of any defect or irregularity with regard to provisions on data protection detected by Controller in the results of Processor’s work.
Managers’ Obligations 4.1 The Managers undertake to use their best endeavours to provide the agreed Management Services as agents for and on behalf of the Owners in accordance with sound ship management practice and to protect and promote the interests of the Owners in all matters relating to the provision of services hereunder. Provided, however, that the Managers in the performance of their management responsibilities under this Agreement shall be entitled to have regard to their overall responsibility in relation to all vessels as may from time to time be entrusted to their management and in particular, but without prejudice to the generality of the foregoing, the Managers shall be entitled to allocate available supplies, manpower and services in such manner as in the prevailing circumstances the Managers in their absolute discretion consider to be fair and reasonable.
4.2 Where the Managers are providing Technical Management in accordance with sub-clause 3.2, they shall procure that the requirements of the law of the flag of the Vessel are satisfied and they shall in particular be deemed to be the “Company” as defined by the ISM Code, assuming the responsibility for the operation of the Vessel and taking over the duties and responsibilities imposed by the ISM Code when applicable.
