NOTICES, QUALITY CONTROL AND SAMPLES Sample Clauses

NOTICES, QUALITY CONTROL AND SAMPLES. A. The licenses granted hereunder are conditioned upon LICENSEE's full and complete compliance with the marking provisions of the patent, trademark and copyright laws of the United States and other countries in the Territory. B. The Licensed Products, as well as all promotional, packaging, and advertising material relative thereto, shall include all appropriate legal notices as required by LICENSOR. [INSERT REQUIRED NOTICE]. C. The Licensed Products shall be of a high quality which is at least equal to comparable products previously manufactured and marketed by LICENSEE under the trademarks and in conformity with a standard sample approved by LICENSOR. D. If the quality of a class of the Licensed Products falls below such a production-run quality, as previously approved by LICENSOR, LICENSEE shall use its best efforts to restore such quality. In the event that LICENSEE has not taken appropriate steps to restore such quality within thirty (30) days after notification by LICENSOR, LICENSOR shall have the right to terminate this Agreement and require that the LICENSEE cease using the Trademarks. E. Prior to the commencement of manufacture and sale of the Licensed Products, LICENSEE shall submit to LICENSOR, at no cost to LICENSOR and for approval as to quality, six (6) sets of samples of all Licensed Products which LICENSEE intends to manufacture and sell and one (1) complete set of all promotional and advertising material associated therewith. Failure of LICENSOR to approve such samples within thirty (30) working days after receipt thereof will be deemed approval. Once such samples have been approved by LICENSOR, LICENSEE shall not materially depart therefrom without LICENSOR's prior express written consent, which shall not be unreasonably withheld. F. At least once during each calendar year, LICENSEE shall submit to LICENSOR, for approval, an additional six (6) sets of samples. G. The LICENSEE agrees to permit LICENSOR or its representative to inspect the facilities where the Licensed Products are being manufactured and packaged.
Sample 1Sample 2See All (9)
AutoNDA by SimpleDocs
NOTICES, QUALITY CONTROL AND SAMPLES. The rights and licenses granted hereunder are conditioned upon Purchaser's full and complete compliance with the marking provisions of the intellectual property laws, if applicable, of the United States and foreign countries. The Covered Products, as well as all promotional, packaging, and advertising material relative thereto, shall include all appropriate legal notices as required by Bio-Tec, including, but not limited to intellectual property notices. The Covered Products shall be of a high quality and manufactured in conformity with the Purchaser Product Specifications.. If the quality of the Covered Products falls below a production-run quality, or fails to meet the requirements of the Purchaser Product Specifications, Purchaser shall use its best efforts to restore such quality. The failure of Purchaser to take appropriate steps to restore such quality after notification by Bio-Tec will constitute a material breach of this Agreement under Section 12(c). From time to time, upon request from Bio-Tec, Purchaser shall submit samples of Covered Products which Purchaser intends to manufacture and sell, so that Bio-Tec can assure conformance with high quality requirements and Purchaser Product Specifications. The Purchaser agrees to permit Bio-Tec or its representative to inspect the facilities where the Covered Products are being manufactured.
Sample 1Sample 2
NOTICES, QUALITY CONTROL AND SAMPLES a. The licenses granted hereunder are conditioned upon LICENSEE's full and complete compliance with the marking provisions of the patent, trademark and copyright laws of Canada. b. The Licensed Products, as well as all promotional, packaging, and advertising material relative thereto, shall include all appropriate legal notices as required by LICENSOR. c. The Licensed Products shall be of a high quality which is at least equal to comparable products proposed to be manufactured and marketed by LICENSEE under the trademarks and in conformity with a standard sample approved by LICENSOR. d. If the quality of a class of the Licensed Products falls below such a production-run quality, as previously approved by LICENSOR, LICENSEE shall use its best efforts to restore such quality. In the event that LICENSEE has not taken appropriate steps to restore such quality within thirty (30) days after notification by LICENSOR, LICENSOR shall have the right to terminate this Agreement and require that the LICENSEE cease using the Trademarks. e. The LICENSEE agrees to permit LICENSOR or its representative to inspect the facilities where the Licensed Products are being manufactured and packaged.
Sample 1Sample 2
NOTICES, QUALITY CONTROL AND SAMPLES a. The licenses granted hereunder are conditioned upon LICENSEE's full and complete compliance with the marking provisions of the patent and trademark laws of the United States, which will be assumed to have been complied with upon LICENSEE’s compliance with the instructions and directions of LICENSOR with respect to packaging marks. b. The Licensed Products, as well as all promotional, packaging, and advertising material relative thereto, shall include all appropriate legal notices as required by governing agencies and LICENSOR. c. The LICENSEE agrees to permit LICENSOR or its representative to inspect the facilities where the Licensed Products are being manufactured and packaged.
Sample 1Sample 2
NOTICES, QUALITY CONTROL AND SAMPLES. A. The License granted hereunder is conditioned upon Licensee’s full and complete compliance with the marking provisions of the trademark and copyright laws of the United States. B. The Licensed ProductPrograms, as well as all promotional, packaging and advertising material relative thereto, shall include the proper copyright notice to reflect the proper owner of the ArtworkPhoto(s) whenever depicted.
Sample 1
NOTICES, QUALITY CONTROL AND SAMPLES. 7.1. The Intellectual Property Licenses granted hereunder are conditioned upon Licensee's full and complete compliance with applicable laws or regulatory requirements with respect to the conduct of Licensee’s business. 7.2. The Licensed Products, as well as all promotional, packaging, and advertising material relative thereto shall include all appropriate legal notices as required by any applicable laws or regulatory requirements. 7.3. The Licensed Products shall be of a high quality which is at least equal to comparable products previously manufactured and marketed by Licensee under the trademarks. 7.4. The Licensee agrees to permit Licensor or its representative to inspect the facilities where the Licensed Products are being manufactured and packaged.
Sample 1
NOTICES, QUALITY CONTROL AND SAMPLES. A. The License granted hereunder is conditioned upon Licensee's full and complete compliance with the marking provisions of the trademark, patent and copyright laws of the United States. B. The Licensed Products and Services, as well as all promotional, packaging, and advertising material relative thereto, shall include all appropriate legal notices as required by Licensor. C. The Licensed Products and Services shall be of "first class" quality. D. If the quality of the Licensed Products and Services falls below such quality, Licensee shall use its best efforts to restore such quality prospectively, upon notice by Licensor.
Sample 1
AutoNDA by SimpleDocs
NOTICES, QUALITY CONTROL AND SAMPLES. A. The licenses granted hereunder are conditioned upon LICENSEE’s full and complete compliance with the marking provisions of the patent, trademark and copyright laws. In the event that LICENSEE grants any previously approved sub-licenses for the use of the Trademarks in countries outside of the United States, LICENSEE from such sub-licensees. B. LICENSEE Shall provide LICENSOR with a written royalty statement in a form acceptable to licensor each Royalty Period whether or not any Licensed Products were sold during that Period and the receipt or acceptance by LICENSOR of any royalty statement or payment shall not prevent LICENSOR from subsequently challenging the validity or accuracy of such statement or payment.
Sample 1

Related to NOTICES, QUALITY CONTROL AND SAMPLES

  • Quality Assurance/Quality Control Contractor shall establish and maintain a quality assurance/quality control program which shall include procedures for continuous control of all construction and comprehensive inspection and testing of all items of Work, including any Work performed by Subcontractors, so as to ensure complete conformance to the Contract with respect to materials, workmanship, construction, finish, functional performance, and identification. The program established by Contractor shall comply with any quality assurance/quality control requirements incorporated in the Contract.

  • Quality Control A. Controlled Affiliate agrees to use the Licensed Marks and Name only in connection with the licensed services and further agrees to be bound by the conditions regarding quality control shown in attached Exhibit A as they may be amended by BCBSA from time-to-time. B. Controlled Affiliate agrees to comply with all applicable federal, state and local laws. C. Controlled Affiliate agrees that it will provide on an annual basis (or more often if reasonably required by Plan or by BCBSA) a report or reports to Plan and BCBSA demonstrating Controlled Affiliate’s compliance with the requirements of this Agreement including but not limited to the quality control provisions of this paragraph and the attached Exhibit A. D. Controlled Affiliate agrees that Plan and/or BCBSA may, from time-to-time, upon reasonable notice, review and inspect the manner and method of Controlled Affiliate’s rendering of service and use of the Licensed Marks and Name. E. As used herein, a Controlled Affiliate is defined as an entity organized and operated in such a manner, that it meets the following requirements: (1) A Plan or Plans authorized to use the Licensed Marks in the Service Area of the Controlled Affiliate pursuant to separate License Agreement(s) with BCBSA, other than such Controlled Affiliate’s License Agreement(s), (the “Controlling Plan(s)”), must have the legal authority directly or indirectly through wholly-owned subsidiaries to select members of the Controlled Affiliate’s governing body having not less than 50% voting control thereof and to: (a) prevent any change in the articles of incorporation, bylaws or other establishing or governing documents of the Controlled Affiliate with which the Controlling Plan(s) do(es) not concur; (b) exercise control over the policy and operations of the Controlled Affiliate at least equal to that exercised by persons or entities (jointly or individually) other than the Controlling Plan(s); and Notwithstanding anything to the contrary in (a) through (b) hereof, the Controlled Affiliate’s establishing or governing documents must also require written approval by the Controlling Plan(s) before the Controlled Affiliate can: (i) change its legal and/or trade names; (ii) change the geographic area in which it operates; (iii) change any of the type(s) of businesses in which it engages; (iv) create, or become liable for by way of guarantee, any indebtedness, other than indebtedness arising in the ordinary course of business; (v) sell any assets, except for sales in the ordinary course of business or sales of equipment no longer useful or being replaced; (vi) make any loans or advances except in the ordinary course of business; (vii) enter into any arrangement or agreement with any party directly or indirectly affiliated with any of the owners or persons or entities with the authority to select or appoint members or board members of the Controlled Affiliate, other than the Plan or Plans (excluding owners of stock holdings of under 5% in a publicly traded Controlled Affiliate); (viii) conduct any business other than under the Licensed Marks and Name; (ix) take any action that any Controlling Plan or BCBSA reasonably believes will adversely affect the Licensed Marks and Name. In addition, a Plan or Plans directly or indirectly through wholly owned subsidiaries shall own at least 50% of any for-profit Controlled Affiliate. (2) A Plan or Plans authorized to use the Licensed Marks in the Service Area of the Controlled Affiliate pursuant to separate License Agreement(s) with BCBSA, other than such Controlled Affiliate’s License Agreement(s), (the “Controlling Plan(s)”), have the legal authority directly or indirectly through wholly-owned subsidiaries to select members of the Controlled Affiliate’s governing body having more than 50% voting control thereof and to: (a) prevent any change in the articles of incorporation, bylaws or other establishing or governing documents of the Controlled Affiliate with which the Controlling Plan(s) do(es) not concur; (b) exercise control over the policy and operations of the Controlled Affiliate. In addition, a Plan or Plans directly or indirectly through wholly-owned subsidiaries shall own more than 50% of any for-profit Controlled Affiliate.

  • Quality Control Program Engineer shall have a quality control program in place that ensures that all deliverable work is of high quality. Engineer shall submit a plan detailing its program to the Inspection Branch of the TxDOT Bridge Division for review and approval prior to beginning work. State may review or audit the programs.

  • Use; Quality Control a. Neither party may alter the other party’s trademarks from the form provided and must comply with removal requests as to specific uses of its trademarks or logos. b. Each party agrees to use, and to cause its Permitted Sublicensees to use, the other party’s trademarks only in good faith and in a dignified manner consistent with such party’s use of the trademarks. Upon written notice to the breaching party, the breaching party has 30 days of the date of the written notice to cure the breach or the license will be terminated.

  • Quality Control Procedures The Seller shall have an internal quality control program that verifies, on a regular basis, the existence and accuracy of the legal documents, credit documents, property appraisals, and underwriting decisions. The program shall include evaluating and monitoring the overall quality of the Seller's loan production and the servicing activities of the Seller. The program is to ensure that the Mortgage Loans are originated and serviced in accordance with Accepted Servicing Standards and the Underwriting Guidelines; guard against dishonest, fraudulent, or negligent acts; and guard against errors and omissions by officers, employees, or other authorized persons.

  • Quality control system (i) The Contractor shall establish a quality control mechanism to ensure compliance with the provisions of this Agreement (the “Quality Assurance Plan” or “QAP”). (ii) The Contractor shall, within 30 (thirty) days of the Appointed Date, submit to the Authority’s Engineer its Quality Assurance Plan which shall include the following: (a) organisation, duties and responsibilities, procedures, inspections and documentation; (b) quality control mechanism including sampling and testing of Materials, test frequencies, standards, acceptance criteria, testing facilities, reporting, recording and interpretation of test results, approvals, check list for site activities, and proforma for testing and calibration in accordance with the Specifications for Road and Bridge Works issued by MORTH, relevant IRC specifications and Good Industry Practice; and (c) internal quality audit system. The Authority’s Engineer shall convey its approval to the Contractor within a period of 21 (twenty-one) days of receipt of the QAP stating the modifications, if any, required, and the Contractor shall incorporate those in the QAP to the extent required for conforming with the provisions of this Clause 11.2. (iii) The Contractor shall procure all documents, apparatus and instruments, fuel, consumables, water, electricity, labour, Materials, samples, and qualified personnel as are necessary for examining and testing the Project Assets and workmanship in accordance with the Quality Assurance Plan. (iv) The cost of testing of Construction, Materials and workmanship under this Article 11 shall be borne by the Contractor.

  • Compliance Control Services (1) Support reporting to regulatory bodies and support financial statement preparation by making the Fund's accounting records available to the Trust, the Securities and Exchange Commission (the “SEC”), and the independent accountants. (2) Maintain accounting records according to the 1940 Act and regulations provided thereunder. (3) Perform its duties hereunder in compliance with all applicable laws and regulations and provide any sub-certifications reasonably requested by the Trust in connection with any certification required of the Trust pursuant to the Xxxxxxxx-Xxxxx Act of 2002 (the “SOX Act”) or any rules or regulations promulgated by the SEC thereunder, provided the same shall not be deemed to change USBFS’s standard of care as set forth herein. (4) Cooperate with the Trust’s independent accountants and take all reasonable action in the performance of its obligations under this Agreement to ensure that the necessary information is made available to such accountants for the expression of their opinion on the Fund’s financial statements without any qualification as to the scope of their examination.

  • COUNTY’S QUALITY ASSURANCE PLAN The County or its agent will evaluate the Contractor’s performance under this Contract on not less than an annual basis. Such evaluation will include assessing the Contractor’s compliance with all Contract terms and conditions and performance standards. Contractor deficiencies which the County determines are severe or continuing and that may place performance of the Contract in jeopardy if not corrected will be reported to the Board of Supervisors. The report will include improvement/corrective action measures taken by the County and the Contractor. If improvement does not occur consistent with the corrective action measures, the County may terminate this Contract or impose other penalties as specified in this Contract.

  • EMHS Governance, Safety and Quality Requirements 4.1 Participates in the maintenance of a safe work environment. 4.2 Actively participates in the Peak Performance program. 4.3 Supports the delivery of safe patient care and the consumers’ experience including participation in continuous quality improvement activities in accordance with the requirements of the National Safety and Quality Health Service Standards and other recognised health standards. 4.4 Completes mandatory training (including safety and quality training) as relevant to role. 4.5 Performs duties in accordance with the EMHS Vision and Values, WA Health Code of Conduct, Occupational Safety and Health legislation, the Disability Services Act and the Equal Opportunity Act and Government, WA Health, EMHS and Departmental / Program specific policies and procedures.

  • SMHS Governance, Safety and Quality Requirements 4.1 Participates in the maintenance of a safe work environment. 4.2 Participates in an annual performance development review. 4.3 Supports the delivery of safe patient care and the consumers’ experience including participation in continuous quality improvement activities in accordance with the requirements of the National Safety and Quality Health Service Standards and other recognised health standards. 4.4 Completes mandatory training (including safety and quality training) as relevant to role. 4.5 Performs duties in accordance with Government, WA Health, South Metropolitan Health Service and Departmental / Program specific policies and procedures. 4.6 Abides by the WA Health Code of Conduct, Occupational Safety and Health legislation, the Disability Services Act and the Equal Opportunity Act.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!