Common use of Operations and Maintenance Clause in Contracts

Operations and Maintenance. Provider shall be responsible for all operations and maintenance of the Solar Facility. The operations and maintenance of the Solar Facility shall include at a minimum: 8.1 All preventative maintenance required to maintain all equipment warranties. 8.2 Provider shall provide erosion control and security for the Solar Facility throughout the Term at its sole expense. Provider shall also be responsible for Solar Facility weed abatement throughout the Term and in compliance with the provisions of the Site Weed Abatement Requirements set forth in Attachment L. 8.3 Performance of dust control during construction of the Solar Facility. Provider shall maintain one complete Engineering Design Package throughout the Term and update with any changes made from the as-built drawings provided at the completion of construction. 8.4 In the event that ninety-five percent (95%) of the Annual Production Estimate) is not met in a given Contract Year, District retains the right to require Provider to conduct one (1) additional panel washing that must be conducted by Provider after May 15th and prior to July 15th of the next Contract Year. District shall provide access to water at its nearest available location for washing at no cost to Provider. 8.5 All pyranometers shall be cleaned at the same time as, and with similar care, as the module washing. Exhibit G – Attachment A – 33 ATTACHMENT A TO GENERAL CONDITIONS AND TECHNICAL SPECIFICATIONS PRELIMINARY ENGINEERING DESIGN PACKAGE Exhibit G – Attachment B – 35 ATTACHMENT B TO GENERAL CONDITIONS AND TECHNICAL SPECIFICATIONS SITE ASSESSMENT TABLE Exhibit G – Attachment C – 36 ATTACHMENT C TO GENERAL CONDITIONS AND TECHNICAL SPECIFICATIONS PROJECT SCHEDULE Provider will develop, with input from District, a Preliminary Project Schedule and a Final Project Schedule using Primavera P6 or equivalent and submit the Final Project Schedule to District within thirty (30) days after the Effective Date. Provider and District will establish a weekly construction meeting at which time the work of the previous week will be reviewed, and a three (3) week look- ahead schedule will be coordinated. The three (3) week look-ahead schedule shall be created in MS Excel® and present the list of activities occurring at the Site on a daily basis. The work on the Project shall be completed on or before the Commercial Operation Date in accordance with the Final Project Schedule set forth below and as may be amended from time to time during the Term. The Final Project Schedule shall only be modified upon the written approval of District. Any modified schedule approved by District shall replace the existing Final Project Schedule set forth below. The Final Project Schedule (Anticipated Key Engineering and Construction Dates) shall include, at a minimum, the following and shall become a part of the Agreement upon District’s approval: 50%, 90% and 100% drawings due to District District review of 50%, 90%, 100% drawings Permit approval Procurement Site preparation Construction start Electrical & Mechanical completion Interconnection sign off Testing & commissioning Utility meter and rate switch completion PTO Final completion date The Final Project Schedule shall not show more than ten percent (10%) of the total activities as critical, and no activity shall have duration longer than thirty (30) days. The Final Project Schedule shall indicate the beginning and completion dates of all phases of construction and shall use the “critical path method” for the planning and scheduling of all work required. The schedule will separately identify those milestones or events that must be completed before other portions of the work can be accomplished. The Final Project Schedule shall incorporate float for inclement weather and resulting muddy site conditions due to rain (separate from any event of Force Majeure) and shall also include any potential acceleration paths. Scheduled float for non-working rain- related days and resulting muddy site conditions shall be based upon the latest and nearest available data from acceptable data issued from the National Weather Service. Exhibit G – Attachment C – 37 A monthly Project schedule update shall be provided to accurately indicate the actual progress of the work against the baseline Final Project Schedule for the prior month, and the remaining planned completion of the work. The scheduling is necessary for District’s adequate monitoring of the progress of the work. District may disapprove such a schedule and require modification to it if, in the opinion of District, adherence to the progress schedule will cause the work not to be completed in accordance with the Agreement. Provider shall adhere to any such modifications required by District. Between the monthly schedule updates, it is the obligation of Provider to monitor the progress of the work against the current construction schedule activities, and to notify District in writing of all changed activity start dates and finish dates. Provider will exchange scheduling information with Subcontractors and suppliers. Provider will order work, equipment and materials with sufficient lead time to avoid interruption of the work. Provider shall also, if requested by District, provide revised schedules within fifteen (15) days if, at any time, District considers the Commercial Operation Date to be in jeopardy. The revised schedule shall be designed to show how Provider intends to accomplish the work to meet the original Commercial Operation Date, as such date may be extended in accordance with the PPA. The form and method employed by Provider shall be the same as for the original progress schedule. Provider shall modify any portions of the schedule that become infeasible because of “activities behind schedule” or for any other valid reason. Provider will provide documents and justification for any schedule changes. An activity that cannot be completed by its original Commercial Operation Date shall be deemed to be behind schedule. IF PROVIDER SUBMITS A REVISED SCHEDULE SHOWING AN EARLIER COMMERCIAL OPERATION DATE FOR THE PROJECT, DISTRICT’S ACCEPTANCE OF THIS REVISED SCHEDULE SHALL NOT ENTITLE PROVIDER TO ANY ADDITIONAL COMPENSATION OR CLAIM DUE TO ANY SUCH REVISED SCHEDULE. Exhibit G – Attachment C – 38 Exhibit G – Attachment C – 39 Exhibit G – Attachment C – 40 Exhibit G – Attachment C – 41 Exhibit G – Attachment C – 42 Exhibit G – Attachment C – 43 Exhibit G – Attachment C – 44 Exhibit G – Attachment C – 45 Exhibit G – Attachment C – 46 Exhibit G – Attachment C – 47 Exhibit G – Attachment C – 48 Exhibit G – Attachment C – 49 Exhibit G – Attachment D – 50 ATTACHMENT D TO GENERAL CONDITIONS AND TECHNICAL SPECIFICATIONS CONSTRUCTION MEETING MINUTES TEMPLATE [See attached.] Exhibit G – Attachment D – 51 <PROJECT NAME> PROGRESS MEETING #XX MINUTES Date: 2014-01-01 Time of Meeting: 0:00 Location: Building XX, Room YY MEETING ATTENDEES Company Name Present (PT) attended part-time (Y) attended in person (CC) attended via conference call Minutes by: Xxxx Xxx Distribution: [Progress Meeting Quorum] CORRECTIONS OR CLARIFICATIONS TO THE MEETING NOTES SHOULD BE DIRECTED TO: Xxxx Xxx  Section 1: Contract No. Date of Entry Action POC Due Date Status  Section 2: Engineering and Design  Section 3: Project/Construction Schedule Review  Section 4: RFIs and Submittals  Section 5: Pending Change Order (PCO), Change Order (CO), and Pay Application  Section 6: General Discussion / Site Issues  Section 7: IOR and SI Topics  Section 8: Scheduled Testing and Inspection Exhibit G – Attachment D – 52  Section 9: End of Meeting Minutes (note these items will be applied to the appropriate sections in the next meeting’s agenda) Exhibit G – Attachment E – 53 ATTACHMENT E TO GENERAL CONDITIONS AND TECHNICAL SPECIFICATIONS CHANGE FORM TEMPLATES This is a Change Order (“CO”) to the Power Purchase Agreement between REC Solar Commercial Corporation, a Delaware corporation (“Provider”) and Eastern Municipal Water District, a California municipal water district (“District”) dated April 3, 2019 (the “PPA”). PARTIES/PROJECT/SITE INFORMATION Project: (Name and Address) REC Solar Project Number: Provider:

Operations and Maintenance. Provider Pursuant to Section 10.5 of this Agreement, Developer shall pay the reasonable expenses (including overheads) for the operation, maintenance, repair and replacement of Connecting Transmission Owner’s Attachment Facilities. The Developer shall pay such O&M Expenses under the procedure described below: A. Annual Actual O&M Payment The Developer shall pay for all reasonable and verifiable O&M Expenses incurred by Connecting Transmission Owner, which expenses shall be responsible billed by Connecting Transmission Owner annually as accumulated during the year for which they were incurred. B. O&M Expenses O&M Expenses shall include (but are not limited to): • Operation & Maintenance • Equipment Replacement • Administrative & General • Applicable Property and Other Taxes C. O&M Payment Developer shall pay all operations O&M Expenses associated with the operation, maintenance, repair and maintenance replacement of the Solar FacilityConnecting Transmission Owner’s Attachment Facilities. The operations and maintenance Any incremental property tax payment resulting from the addition of the Solar Facility shall include at a minimum: 8.1 All preventative maintenance required to maintain all equipment warranties. 8.2 Provider shall provide erosion control and security for Connecting Transmission Owner's Attachment Facilities will be the Solar Facility throughout the Term at its sole expense. Provider shall also be responsible for Solar Facility weed abatement throughout the Term and in compliance with the provisions responsibility of the Site Weed Abatement Requirements set forth in Attachment L. 8.3 Performance of dust control during Developer and paid annually. A property tax assessment before and after construction of the Solar FacilityConnecting Transmission Owner’s Attachment Facilities will be determined and submitted to the Developer for review. Provider Developer shall maintain one complete Engineering Design Package throughout pay the Term and update with any changes made actual incremental property tax liability incurred by the Connecting Transmission Owner resulting from the as-built drawings provided at property assessment of Connecting Transmission Owner’s Attachment Facilities dedicated to the completion of construction. 8.4 In project. All payments due to be made by the event that ninety-five percent (95%) of the Annual Production Estimate) is not met in a given Contract Year, District retains the right to require Provider to conduct one (1) additional panel washing that must be conducted by Provider after May 15th and prior to July 15th of the next Contract Year. District shall provide access to water at its nearest available location for washing at no cost to Provider. 8.5 All pyranometers Developer shall be cleaned at the same time as, and with similar care, as the module washing. Exhibit G – Attachment A – 33 ATTACHMENT A TO GENERAL CONDITIONS AND TECHNICAL SPECIFICATIONS PRELIMINARY ENGINEERING DESIGN PACKAGE Exhibit G – Attachment B – 35 ATTACHMENT B TO GENERAL CONDITIONS AND TECHNICAL SPECIFICATIONS SITE ASSESSMENT TABLE Exhibit G – Attachment C – 36 ATTACHMENT C TO GENERAL CONDITIONS AND TECHNICAL SPECIFICATIONS PROJECT SCHEDULE Provider will develop, with input from District, a Preliminary Project Schedule and a Final Project Schedule using Primavera P6 or equivalent and submit the Final Project Schedule to District made within thirty (30) days after receiving an invoice from the Effective DateConnecting Transmission Owner, which invoice shall be issued after the end of each calendar year for the most recent calendar year. Provider A-5 Service Agreement No. 1702 Figure X-0 Service Agreement No. 1702 Appendix B Milestones I. SELECTED OPTION PURSUANT TO ARTICLE 5.1 The selected option under Article 5.1 of this Interconnection Agreement is the “Option to Build” except for Connecting Transmission Owner’s engineering, procurement and District construction obligations which shall be performed in accordance with the “Standard Option.” The Parties have agreed to the division of responsibility and scope as described in Sections I.B and II.A of Appendix A. II. MILESTONES MILESTONE DATE RESPONSIBLE PARTY POI Substation Conceptual Package and Equipment March 8, 2011 Developer submitted Specifications to Connecting Transmission Owner Connecting Transmission Owner Approval of April 2, 2011 Connecting Major Equipment Specifications/Conceptual Transmission Owner Package Begin Substation Construction Substation In-Ground Package to Connecting Transmission Owner Substation Site/Grading Work Substation Above-Ground Package to Connecting Transmission Owner SP&C Package 1 to Connecting Transmission Owner Issue SP&C Package 1 for Construction SP&C Package 2 to Connecting Transmission Owner Issue SP&C Package 2 for Construction SP&C Package 3 to Connecting Transmission Owner Major Substation Equipment Installation Control House Installation Substation Construction Complete Complete Facility Testing/Commissioning April 1, 2011 April 9, 2011 April 26, 2011 April 16, 2011 April 16, 2011 May 6, 2011 May 10, 2011 May 30, 2011 June 1, 2011 May 24,2011 June 15, 2011 August 30, 2011 September 28, 2011 Developer Developer Developer Connecting Transmission Owner Developer Connecting Transmission Owner Developer Connecting Transmission Owner Developer Developer Developer Developer Connecting B-1 Service Agreement No. 1702 Transmission Owner 115kV POI Line Tap Engineer POI Line 953 Tap Work 115kV tie in poles/equipment/materials Deliver and dress new 115kV structures Set 2 new 115kV pole structures Cut and dead end OH cables onto new poles Install OH circuits from new poles to substation Bath Substation Developer Obtain Connecting Transmission Owner design data package Purchase materials/equipment In-Ground Package Complete Above Ground Package Complete SP&C Package #1 Complete SP&C Package #2 Complete SP&C Package #3 Complete Construction Complete Testing and Commissioning Xxxxxxx Substation Developer Obtain Connecting Transmission Owner design data package Purchase materials/equipment In-Ground Package Complete Above Ground Package Complete SP&C Package #1 Complete SP&C Package #2 Complete SP&C Package #3 Complete Construction Complete Testing and Commissioning May 03, 2011 Connecting Transmission Owner May 31, 2011 Connecting Transmission Owner August 09, 2011 Connecting Transmission Owner September 20, 2011 Connecting Transmission Owner October 20, 2011 Connecting Transmission Owner October 20, 2011 Connecting Transmission Owner Connecting April 19, 2011 Transmission Owner June 11, 2011 Developer/ Connecting Transmission Owner May 14, 2011 Developer June 18, 2011 Developer May 21, 2011 Developer June 25, 2011 Developer July 7, 2011 Developer September 17, 2011 Developer/ Connecting Transmission Owner October 1, 2011 Connecting Transmission Owner Connecting April 19, 2011 Transmission Owner June 11, 2011 Developer/ Connecting Transmission Owner May 14, 2011 Developer June 18, 2011 Developer May 21, 2011 Developer June 25, 2011 Developer July 7, 2011 Developer September 17, 2011 Developer/ Connecting Transmission Owner October 1, 2011 Connecting B-2 Service Agreement No. 1702 Transmission Owner  In-Service Date October 18, 2011 Developer/ Connecting Transmission Owner  Initial Synchronization Date October 25, 2011 Developer/ Connecting Transmission Owner  Commercial Operation Date October 25, 2011 Developer/ Connecting Transmission Owner Service Agreement No. 1702 Appendix C Interconnection Details Description of Large Generating Facility including Point of Interconnection The Large Generating Facility is a 62.5 MW wind power plant that will establish a weekly construction meeting at which time the work consist of 25, 2.5 MW Clipper N90 double-fed asynchronous generators. Each of the previous week 25 units have the capability to operate (at each generator terminal) in the range of 0.95 leading and 0.95 lagging. This gives the entire generating facility an operating range from +20.5 MVAR to -20.5 MVAR (sum of unit capabilities). The Large Generating Facility will connect to NYSEG’s Bath - Xxxxxxx 115 kV line #953 approximately 5 miles from Xxxxxxx Substation. The Point of Interconnection is identified on Figure A-1 in Appendix A. The Point of Change of Ownership shall be reviewed, and a the three terminals of the three (3) week look- ahead schedule Current Transformer/Voltage Transformer (“CT/VT”) metering units that will be coordinatedlocated physically between the Generator Disconnect Switch (B1-05) located in the Xxxxxx Wind Farm Substation and the NYSEG disconnect switch (B1-06) located in the Xxxxxxx Xxxx Substation as identified in Figure A-1 in Appendix A. The substation will contain a 115 kV-34.5 kV 42/56/70 MVA 8.1% Z @ 42 MVA transformer to serve two 34.5 kV collector circuits. One of the collector circuits will connect to 15 wind turbines; the other will connect to 10 wind turbines. Each turbine will be connected to the 34.5 kV system through a 34.5 kV (delta) - 690 v (grounded wye) 2750 kVA 5.75% Z transformer. Developer Operating Requirements The Developer must comply with the Connecting Transmission Owner’s operating instructions and requirements including but not limited to Connecting Transmission Owner’s Operation Coordination Agreement, as it may change from time to time. The three (3) week look-ahead schedule shall be created in MS Excel® Developer must comply with all applicable NYISO tariffs and present the list of activities occurring at the Site on a daily basis. The work on the Project shall be completed on or before the Commercial Operation Date in accordance with the Final Project Schedule set forth below and procedures, as may be amended from time to time during the Termtime. The Final Project Schedule shall only be modified upon the written approval of District. Any modified schedule approved by District shall replace the existing Final Project Schedule post-transition period LVRT standard, as set forth belowin Appendix G, is applicable to the Developer’s Large Generating Facility. For purposes of compliance with Appendix G, the Connecting Transmission Owner has determined that the Developer shall maintain the Large Generating Facility in service during a three-phase fault for nine (9) cycles. Appendix D Security Arrangements Details Infrastructure security of New York State Transmission System equipment and operations and control hardware and software is essential to ensure day-to-day New York State Transmission System reliability and operational security. The Final Project Schedule (Anticipated Key Engineering Commission will expect the NYISO, all Connecting Transmission Owners, all Developers and Construction Dates) shall includeall other Market Participants to comply with the recommendations offered by the President’s Critical Infrastructure Protection Board and, at a minimumeventually, best practice recommendations from the following electric reliability authority. All public utilities will be expected to meet basic standards for system infrastructure and shall become a part of the Agreement upon District’s approval: 50%operational security, 90% and 100% drawings due to District District review of 50%including physical, 90%, 100% drawings Permit approval Procurement Site preparation Construction start Electrical & Mechanical completion Interconnection sign off Testing & commissioning Utility meter and rate switch completion PTO Final completion date The Final Project Schedule shall not show more than ten percent (10%) of the total activities as criticaloperational, and no activity shall have duration longer than thirty (30) dayscyber-security practices. The Final Project Schedule shall indicate the beginning and completion dates of all phases of construction and shall use the “critical path method” for the planning and scheduling of all work requiredService Agreement No. The schedule will separately identify those milestones or events that must be completed before other portions of the work can be accomplished. The Final Project Schedule shall incorporate float for inclement weather and resulting muddy site conditions due to rain (separate from any event of Force Majeure) and shall also include any potential acceleration paths. Scheduled float for non-working rain- related days and resulting muddy site conditions shall be based upon the latest and nearest available data from acceptable data issued from the National Weather Service. Exhibit G – Attachment C – 37 A monthly Project schedule update shall be provided to accurately indicate the actual progress of the work against the baseline Final Project Schedule for the prior month, and the remaining planned completion of the work. The scheduling is necessary for District’s adequate monitoring of the progress of the work. District may disapprove such a schedule and require modification to it if, in the opinion of District, adherence to the progress schedule will cause the work not to be completed in accordance with the Agreement. Provider shall adhere to any such modifications required by District. Between the monthly schedule updates, it is the obligation of Provider to monitor the progress of the work against the current construction schedule activities, and to notify District in writing of all changed activity start dates and finish dates. Provider will exchange scheduling information with Subcontractors and suppliers. Provider will order work, equipment and materials with sufficient lead time to avoid interruption of the work. Provider shall also, if requested by District, provide revised schedules within fifteen (15) days if, at any time, District considers the 0000 Xxxxxxxx X Commercial Operation Date [Date] New York Independent System Operator, Inc. Attn: Vice President, Operations 0000 Xxxxxx Xxxx Schenectady, NY 12303 New York State Electric & Gas Corporation Attn: Manager - Programs/Projects Electric Transmission Services 00 Xxxx Xxxxx Xxxxxxxxxx, XX 00000-0000 Re: _____________ Large Generating Facility Dear __________________: On [Date] [Developer] has completed Trial Operation of Unit No. ___. This letter confirms that [Developer] commenced Commercial Operation of Unit No. ___ at the Large Generating Facility, effective as of [Date plus one day]. Thank you. [Signature] [Developer Representative] Service Agreement No. 1702 Appendix F Addresses for Delivery of Notices and Xxxxxxxx Notices: NYISO: Before commercial operation of the Large Generating Facility: New York Independent System Operator, Inc. Attn: Xxxxx Xxxx Vice President, System and Resource Planning 00 Xxxx Xxxxxxxxx Rensselaer, NY 12144 Phone: (000) 000-0000 Fax: (000) 000-0000 After commercial operation of the Large Generating Facility New York Independent System Operator, Inc. Attn: Vice President, Operations 0000 Xxxxxx Xxxx Schenectady, NY 12303 Phone: (000) 000-0000 Fax: (000) 000-0000 New York State Electric & Gas Corporation Attn: Manager - Programs/Projects Electric Transmission Services 00 Xxxx Xxxxx Xxxxxxxxxx, XX 00000-0000 Phone: (000) 000-0000 Fax: (000) 000-0000 Xxxxxx Wind LLC c/o EverPower Wind Holdings Inc. Attn: Xxxxxx Xxxxxxxxxx 00 Xxxx 00xx Xxxxxx, 00xx Xxxxx Xxx Xxxx, XX 00000 Phone: (000) 000-0000 Service Agreement No. 1702 Xxxxxxxx and Payments: New York State Electric & Gas Corporation Attn: Manager - Programs/Projects Electric Transmission Services 00 Xxxx Xxxxx Xxxxxxxxxx, XX 00000-0000 Phone: (000) 000-0000 Fax: (000) 000-0000 Xxxxxx Wind LLC c/o EverPower Wind Holdings Inc. Attn: Xxxxxx Xxxxxxxxxx 00 Xxxx 00xx Xxxxxx, 00xx Xxxxx Xxx Xxxx, XX 00000 Phone (000) 000-0000 Alternative Forms of Delivery of Notices (telephone, facsimile or email): NYISO: Before commercial operation of the Large Generating Facility: New York Independent System Operator, Inc. Attn: Xxxxx Xxxx Vice President, System and Resource Planning 00 Xxxx Xxxxxxxxx Rensselaer, NY 12144 Phone: (000) 000-0000 Fax: (000) 000-0000 After commercial operation of the Large Generating Facility New York Independent System Operator, Inc. Attn: Vice President, Operations 0000 Xxxxxx Xxxx Schenectady, NY 12303 Phone: (000) 000-0000 Fax: (000) 000-0000 Service Agreement No. 1702 New York State Electric & Gas Corporation Attn: Manager - Programs/Projects Electric Transmission Services 00 Xxxx Xxxxx Xxxxxxxxxx, XX 00000-0000 Phone: (000) 000-0000 Fax: (000) 000-0000 Xxxxxx Wind LLC c/o EverPower Wind Holdings Inc. Attn: Xxxxxx Xxxxxxxxxx 00 Xxxx 00xx Xxxxxx, 00xx Xxxxx Xxx Xxxx, XX 00000 Phone: (000) 000-0000 Service Agreement No. 1702 Appendix G Interconnection Requirements for a Wind Generating Plant Appendix G sets forth requirements and provisions specific to be in jeopardya wind generating plant. All other requirements of this LGIA continue to apply to wind generating plant interconnections. A. Technical Standards Applicable to a Wind Generating Plant i. Low Voltage Ride-Through (LVRT) Capability Transition Period LVRT Standard 1. Wind generating plants are required to remain in-service during three-phase faults with normal clearing (which is a time period of approximately 4 - 9 cycles) and single line to ground faults with delayed clearing, and subsequent post-fault voltage recovery to prefault voltage unless clearing the fault effectively disconnects the generator from the system. The revised schedule clearing time requirement for a three-phase fault will be specific to the wind generating plant substation location, as determined by and documented by the Connecting G-1 Service Agreement No. 1702 Transmission Owner for the Transmission District to which the wind generating plant will be interconnected. The maximum clearing time the wind generating plant shall be designed required to show how Provider intends withstand for a three-phase fault shall be 9 cycles at a voltage as low as 0.15 p.u., as measured at the high side of the wind generating plant step-up transformer (i.e. the transformer that steps the voltage up to accomplish the work transmission interconnection voltage or “GSU”), after which, if the fault remains following the location-specific normal clearing time for three-phase faults, the wind generating plant may disconnect from the transmission system. 2. This requirement does not apply to faults that would occur between the wind generator terminals and the high side of the GSU or to faults that would result in a voltage lower than 0.15 per unit on the high side of the GSU serving the facility. 3. Wind generating plants may be tripped after the fault period if this action is intended as part of a special protection system. 4. Wind generating plants may meet the LVRT requirements of this standard by the performance of the generators or by installing additional equipment (e.g., Static VAr Compensator, etc.) within the wind generating plant or by a combination of generator performance and additional equipment. 5. Existing individual generator units that are, or have been, interconnected to the network at the same location at the effective date of the Appendix G LVRT Standard are exempt from meeting the Appendix G LVRT Standard for the remaining life of the existing generation equipment. Existing individual generator units that are replaced are required to meet the original Commercial Operation Date, as such date may be extended in accordance with the PPAAppendix G LVRT Standard. The form and method employed by Provider shall be the same as for the original progress schedule. Provider shall modify any portions of the schedule that become infeasible because of “activities behind schedule” or for any other valid reason. Provider will provide documents and justification for any schedule changes. An activity that cannot be completed by its original Commercial Operation Date shall be deemed to be behind schedule. IF PROVIDER SUBMITS A REVISED SCHEDULE SHOWING AN EARLIER COMMERCIAL OPERATION DATE FOR THE PROJECT, DISTRICT’S ACCEPTANCE OF THIS REVISED SCHEDULE SHALL NOT ENTITLE PROVIDER TO ANY ADDITIONAL COMPENSATION OR CLAIM DUE TO ANY SUCH REVISED SCHEDULE. Exhibit G – Attachment C – 38 Exhibit G – Attachment C – 39 Exhibit G – Attachment C – 40 Exhibit G – Attachment C – 41 Exhibit G – Attachment C – 42 Exhibit G – Attachment C – 43 Exhibit G – Attachment C – 44 Exhibit G – Attachment C – 45 Exhibit G – Attachment C – 46 Exhibit G – Attachment C – 47 Exhibit G – Attachment C – 48 Exhibit G – Attachment C – 49 Exhibit G – Attachment D – 50 ATTACHMENT D TO GENERAL CONDITIONS AND TECHNICAL SPECIFICATIONS CONSTRUCTION MEETING MINUTES TEMPLATE [See attached.] Exhibit G – Attachment D – 51 <PROJECT NAME> PROGRESS MEETING #XX MINUTES Date: 2014-01-01 Time of Meeting: 0:00 Location: Building XX, Room YY MEETING ATTENDEES Company Name Present (PT) attended part-time (Y) attended in person (CC) attended via conference call Minutes by: Xxxx Xxx Distribution: [Progress Meeting Quorum] CORRECTIONS OR CLARIFICATIONS TO THE MEETING NOTES SHOULD BE DIRECTED TO: Xxxx Xxx  Section 1: Contract Service Agreement No. Date of Entry Action POC Due Date Status  Section 2: Engineering and Design  Section 3: Project/Construction Schedule Review  Section 4: RFIs and Submittals  Section 5: Pending Change Order (PCO), Change Order (CO), and Pay Application  Section 6: General Discussion / Site Issues  Section 7: IOR and SI Topics  Section 8: Scheduled Testing and Inspection Exhibit G – Attachment D – 52  Section 9: End of Meeting Minutes (note these items will be applied to the appropriate sections in the next meeting’s agenda) Exhibit G – Attachment E – 53 ATTACHMENT E TO GENERAL CONDITIONS AND TECHNICAL SPECIFICATIONS CHANGE FORM TEMPLATES This is a Change Order (“CO”) to the Power Purchase Agreement between REC Solar Commercial Corporation, a Delaware corporation (“Provider”) and Eastern Municipal Water District, a California municipal water district (“District”) dated April 3, 2019 (the “PPA”). PARTIES/PROJECT/SITE INFORMATION Project: (Name and Address) REC Solar Project Number: Provider:1702

Operations and Maintenance. Provider In terms of this Agreement, the Developer at all times shall ensure that all Facilities are maintained properly. The Developer can either do such O&M itself or through best practices facility management entities. For the purpose of the Concession cum Lease Agreement, the activities of operations and maintenance shall include but not be responsible limited to:  Maintenance: To maintain and keep in good condition the areas;  Cleaning: To arrange for cleaning of the areas including the common areas and keep this clean at all operations times;  Manpower: To make available suitable and qualified and experienced manpower for the operation and maintenance of the Solar facilities / utilities;  The Developer shall be solely responsible and liable for the actions of its manpower and shall keep BSHB indemnified against actions by the manpower;  To Make House Rules: To make, amend or revoke from time to time and to enforce House Rules and other regulations and by-laws governing the use, occupation and maintenance;  To prevent Obstructions: To prepare and issue house rules to prevent obstruction of any of the common areas and take necessary action if the rules are not adhered to;  To Remove Refuse: To prepare and issue house rules to prevent any refuse from being deposited (other than at the refuse collection points provided for such purpose) and to remove refuse and to arrange for its disposal at regular intervals;  To Maintain and Improve Amenities: To maintain and improve amenities for the better enjoyment or use thereof by occupiers;  To Maintain Security of the entire Facility;  To Deal with Complaints: To deal fairly, impartially and courteously with all complaints and enquiries made by the occupants;  The Developer shall make recommendations to BSHB in respect of all Insurance matters relating to the Facility. The operations Developer shall take / renew / extend the Insurance Policy in its name, and maintenance shall pay appropriate premium on the policy taken;  The Developer shall also provide adequate experienced supervisors, caretakers, attendants and other staff as may be required for the proper management of the Solar facility;  The Developer shall also provide Facility Manager to carry out the day to day functioning of the Facility;  The Developer may after securing permission of BSHB, appoint / engage third party contractors to undertake work / operations for the benefit of the Facility;  The Developer shall include at a minimum: 8.1 All preventative maintenance prepare quarterly reports on the on-going management of the facility and shall keep BSHB informed of the operations.  The Developer shall be required to maintain all equipment warranties. 8.2 Provider shall provide erosion control and security for the Solar Facility throughout the Term at its sole expensecommon assets. Provider shall also be responsible for Solar Facility weed abatement throughout the Term and in compliance with the provisions of the Site Weed Abatement Requirements set forth in Attachment L. 8.3 Performance of dust control during construction of the Solar Facility. Provider shall maintain one complete Engineering Design Package throughout the Term and update with any changes made from the as-built drawings provided at the completion of construction. 8.4 In the event that ninety-five percent (95%) of the Annual Production Estimate) is not met in a given Contract Year, District retains the right to require Provider to conduct one (1) additional panel washing that must be conducted by Provider after May 15th and prior to July 15th of the next Contract Year. District shall provide access to water at its nearest available location for washing at no cost to Provider. 8.5 All pyranometers shall be cleaned at the same time as, and with similar care, as the module washing. Exhibit G – Attachment A – 33 ATTACHMENT A TO GENERAL CONDITIONS AND TECHNICAL SPECIFICATIONS PRELIMINARY ENGINEERING DESIGN PACKAGE Exhibit G – Attachment B – 35 ATTACHMENT B TO GENERAL CONDITIONS AND TECHNICAL SPECIFICATIONS SITE ASSESSMENT TABLE Exhibit G – Attachment C – 36 ATTACHMENT C TO GENERAL CONDITIONS AND TECHNICAL SPECIFICATIONS PROJECT SCHEDULE Provider This will develop, with input from District, a Preliminary Project Schedule and a Final Project Schedule using Primavera P6 or equivalent and submit the Final Project Schedule to District within thirty (30) days after the Effective Date. Provider and District will establish a weekly construction meeting at which time the work of the previous week will be reviewed, and a three (3) week look- ahead schedule will be coordinated. The three (3) week look-ahead schedule shall be created in MS Excel® and present the list of activities occurring at the Site on a daily basis. The work on the Project shall be completed on or before the Commercial Operation Date in accordance with the Final Project Schedule set forth below and as may be amended from time to time during the Term. The Final Project Schedule shall only be modified upon the written approval of District. Any modified schedule approved by District shall replace the existing Final Project Schedule set forth below. The Final Project Schedule (Anticipated Key Engineering and Construction Dates) shall include, at a minimum, the following and shall become a part of the Agreement upon District’s approval: 50%, 90% and 100% drawings due to District District review of 50%, 90%, 100% drawings Permit approval Procurement Site preparation Construction start Electrical & Mechanical completion Interconnection sign off Testing & commissioning Utility meter and rate switch completion PTO Final completion date The Final Project Schedule shall not show more than ten percent (10%) of the total activities as critical, and no activity shall have duration longer than thirty (30) days. The Final Project Schedule shall indicate the beginning and completion dates of all phases of construction and shall use the “critical path method” for the planning and scheduling of all work required. The schedule will separately identify those milestones or events that must be completed before other portions of the work can be accomplished. The Final Project Schedule shall incorporate float for inclement weather and resulting muddy site conditions due to rain (separate from any event of Force Majeure) and shall also essentially include any potential acceleration paths. Scheduled float for non-working rain- related days and resulting muddy site conditions shall be based upon the latest and nearest available data from acceptable data issued from the National Weather Service. Exhibit G – Attachment C – 37 A monthly Project schedule update shall be provided to accurately indicate the actual progress of the work against the baseline Final Project Schedule for the prior month, and the remaining planned completion of the work. The scheduling is necessary for District’s adequate monitoring of the progress of the work. District may disapprove such a schedule and require modification to it if, in the opinion of District, adherence to the progress schedule will cause the work not to be completed in accordance with the Agreement. Provider shall adhere to any such modifications required by District. Between the monthly schedule updates, it is the obligation of Provider to monitor the progress of the work against the current construction schedule activities, and to notify District in writing of all changed activity start dates and finish dates. Provider will exchange scheduling information with Subcontractors and suppliers. Provider will order work, equipment and materials with sufficient lead time to avoid interruption of the work. Provider shall also, if requested by District, provide revised schedules within fifteen (15) days if, at any time, District considers the Commercial Operation Date to be in jeopardy. The revised schedule shall be designed to show how Provider intends to accomplish the work to meet the original Commercial Operation Date, as such date may be extended in accordance with the PPA. The form and method employed by Provider shall be the same as for the original progress schedule. Provider shall modify any portions of the schedule that become infeasible because of “activities behind schedule” or for any other valid reason. Provider will provide documents and justification for any schedule changes. An activity that canbut not be completed by its original Commercial Operation Date shall be deemed limited to be behind schedule. IF PROVIDER SUBMITS A REVISED SCHEDULE SHOWING AN EARLIER COMMERCIAL OPERATION DATE FOR THE PROJECTperiodic maintenance, DISTRICT’S ACCEPTANCE OF THIS REVISED SCHEDULE SHALL NOT ENTITLE PROVIDER TO ANY ADDITIONAL COMPENSATION OR CLAIM DUE TO ANY SUCH REVISED SCHEDULE. Exhibit G – Attachment C – 38 Exhibit G – Attachment C – 39 Exhibit G – Attachment C – 40 Exhibit G – Attachment C – 41 Exhibit G – Attachment C – 42 Exhibit G – Attachment C – 43 Exhibit G – Attachment C – 44 Exhibit G – Attachment C – 45 Exhibit G – Attachment C – 46 Exhibit G – Attachment C – 47 Exhibit G – Attachment C – 48 Exhibit G – Attachment C – 49 Exhibit G – Attachment D – 50 ATTACHMENT D TO GENERAL CONDITIONS AND TECHNICAL SPECIFICATIONS CONSTRUCTION MEETING MINUTES TEMPLATE [See attachedcorrective maintenance etc.] Exhibit G – Attachment D – 51 <PROJECT NAME> PROGRESS MEETING #XX MINUTES Date: 2014-01-01 Time of Meeting: 0:00 Location: Building XX, Room YY MEETING ATTENDEES Company Name Present (PT) attended part-time (Y) attended in person (CC) attended via conference call Minutes by: Xxxx Xxx Distribution: [Progress Meeting Quorum] CORRECTIONS OR CLARIFICATIONS TO THE MEETING NOTES SHOULD BE DIRECTED TO: Xxxx Xxx  Section 1: Contract No. Date of Entry Action POC Due Date Status  Section 2: Engineering and Design  Section 3: Project/Construction Schedule Review  Section 4: RFIs and Submittals  Section 5: Pending Change Order (PCO), Change Order (CO), and Pay Application  Section 6: General Discussion / Site Issues  Section 7: IOR and SI Topics  Section 8: Scheduled Testing and Inspection Exhibit G – Attachment D – 52  Section 9: End of Meeting Minutes (note these items will be applied to the appropriate sections in the next meeting’s agenda) Exhibit G – Attachment E – 53 ATTACHMENT E TO GENERAL CONDITIONS AND TECHNICAL SPECIFICATIONS CHANGE FORM TEMPLATES This is a Change Order (“CO”) to the Power Purchase Agreement between REC Solar Commercial Corporation, a Delaware corporation (“Provider”) and Eastern Municipal Water District, a California municipal water district (“District”) dated April 3, 2019 (the “PPA”). PARTIES/PROJECT/SITE INFORMATION Project: (Name and Address) REC Solar Project Number: Provider:

Operations and Maintenance. Provider CITY hereby authorizes and allows CAL WATER full and unlimited access to and use of the facilities described herein for the purpose of supplying raw water to CAL WATER's Northeast Bakersfield water treatment plant and for all operations and routine maintenance activities associated with the facilities. CITY grants to CAL WATER full and unlimited ingress and egress to CITY owned facilities within the described water facilities area and CAL WATER agrees to provide operations and routine maintenance of the CITY owned facilities as described in this Agreement. Operations and routine maintenance shall include but are not limited to: daily system inspection, meter readings, water quality testing as required by law, pumping flow adjustments, trash and debris removal from diversion inlet and pumping station, turn-out adjustments for irrigation, security fence inspections and minor fence repairs, reservoir inspections, minor reservoir levee repairs, periodic road grading and, in general, to do all such acts and perform such routine services as required to operate and maintain the water facilities in accordance with accepted industry practices. Should non-scheduled operations, maintenance or emergency repairs be required, CAL WATER and CITY shall confer and determine expedient and cost effective methods of correction under appropriate statutes and [SEAL] CITY OF BAKERSFIELD ORIGINAL -------------------------------------------------------------------------------- regulations as may apply to each party. The CITY shall be responsible for all operations and one hundred percent (100%) payment of extraordinary costs for non-scheduled operations, maintenance of or emergency repairs for facilities that are 100% owned by the Solar FacilityCITY. The operations and maintenance of the Solar Facility CITY shall include at a minimum: 8.1 All preventative maintenance required to maintain all equipment warranties. 8.2 Provider shall provide erosion control and security for the Solar Facility throughout the Term at its sole expense. Provider shall also be responsible for Solar Facility weed abatement throughout fifty percent (50%) payment of extraordinary costs for non-scheduled operations, maintenance or emergency repairs for pump station facilities for which the Term and in compliance with the provisions of the Site Weed Abatement Requirements set forth in Attachment L. 8.3 Performance of dust control during construction of the Solar FacilityCITY shares a 50% ownership. Provider The CITY shall maintain one complete Engineering Design Package throughout the Term and update with any changes made from the as-built drawings provided at the completion of construction. 8.4 In the event that ninety-be responsible for twenty five percent (9525%) payment of the Annual Production Estimate) is not met in extraordinary costs for non-scheduled operations, maintenance or emergency repairs for pump station facilities for which CITY shares a given Contract Year25% ownership. Allocation of costs for non-scheduled operations, District retains the right to require Provider to conduct one (1) additional panel washing that must be conducted by Provider after May 15th and prior to July 15th of the next Contract Year. District shall provide access to water at its nearest available location for washing at no cost to Provider. 8.5 All pyranometers maintenance or emergency repairs shall be cleaned at the same time as, and with similar care, as the module washing. Exhibit G – Attachment A – 33 ATTACHMENT A TO GENERAL CONDITIONS AND TECHNICAL SPECIFICATIONS PRELIMINARY ENGINEERING DESIGN PACKAGE Exhibit G – Attachment B – 35 ATTACHMENT B TO GENERAL CONDITIONS AND TECHNICAL SPECIFICATIONS SITE ASSESSMENT TABLE Exhibit G – Attachment C – 36 ATTACHMENT C TO GENERAL CONDITIONS AND TECHNICAL SPECIFICATIONS PROJECT SCHEDULE Provider will develop, with input from District, a Preliminary Project Schedule and a Final Project Schedule using Primavera P6 or equivalent and submit the Final Project Schedule to District within thirty (30) days after the Effective Date. Provider and District will establish a weekly construction meeting at which time the work of the previous week will be reviewed, and a three (3) week look- ahead schedule will be coordinated. The three (3) week look-ahead schedule shall be created in MS Excel® and present the list of activities occurring at the Site on a daily basis. The work on the Project shall be completed on or before the Commercial Operation Date in accordance with the Final Project Schedule set forth below and as may be amended from time to time during the Term. The Final Project Schedule shall only be modified upon the written approval of District. Any modified schedule approved by District shall replace the existing Final Project Schedule set forth below. The Final Project Schedule (Anticipated Key Engineering and Construction Dates) shall include, at a minimum, the following and shall become a part of the Reimbursement Agreement upon District’s approval: 50%, 90% and 100% drawings due to District District review of 50%, 90%, 100% drawings Permit approval Procurement Site preparation Construction start Electrical & Mechanical completion Interconnection sign off Testing & commissioning Utility meter and rate switch completion PTO Final completion date The Final Project Schedule shall not show more than ten percent (10%) of the total activities as critical, and no activity shall have duration longer than thirty (30) days. The Final Project Schedule shall indicate the beginning and completion dates of all phases of construction and shall use the “critical path method” for the planning and scheduling of all work required. The schedule will separately identify those milestones or events that must be completed before other portions of the work can be accomplished. The Final Project Schedule shall incorporate float for inclement weather and resulting muddy site conditions due to rain (separate from any event of Force Majeure) and shall also include any potential acceleration paths. Scheduled float for non-working rain- related days and resulting muddy site conditions shall be based upon the latest and nearest available data from acceptable data issued from the National Weather Service. Exhibit G – Attachment C – 37 A monthly Project schedule update shall be provided to accurately indicate the actual progress of the work against the baseline Final Project Schedule for the prior month, and the remaining planned completion of the work. The scheduling is necessary for District’s adequate monitoring of the progress of the work. District may disapprove such a schedule and require modification to it if, in the opinion of District, adherence to the progress schedule will cause the work not to be completed in accordance with the Agreement. Provider shall adhere to any such modifications required by District. Between the monthly schedule updates, it is the obligation of Provider to monitor the progress of the work against the current construction schedule activities, and to notify District in writing of all changed activity start dates and finish dates. Provider will exchange scheduling information with Subcontractors and suppliers. Provider will order work, equipment and materials with sufficient lead time to avoid interruption of the work. Provider shall also, if requested by District, provide revised schedules within fifteen (15) days if, at any time, District considers the Commercial Operation Date to be in jeopardy. The revised schedule shall be designed to show how Provider intends to accomplish the work to meet the original Commercial Operation Date, as such date may be extended in accordance with the PPA. The form and method employed by Provider shall be the same as for the original progress schedule. Provider shall modify any portions of the schedule that become infeasible because of “activities behind schedule” or for any other valid reason. Provider will provide documents and justification for any schedule changes. An activity that cannot be completed by its original Commercial Operation Date shall be deemed to be behind schedule. IF PROVIDER SUBMITS A REVISED SCHEDULE SHOWING AN EARLIER COMMERCIAL OPERATION DATE FOR THE PROJECT, DISTRICT’S ACCEPTANCE OF THIS REVISED SCHEDULE SHALL NOT ENTITLE PROVIDER TO ANY ADDITIONAL COMPENSATION OR CLAIM DUE TO ANY SUCH REVISED SCHEDULE. Exhibit G – Attachment C – 38 Exhibit G – Attachment C – 39 Exhibit G – Attachment C – 40 Exhibit G – Attachment C – 41 Exhibit G – Attachment C – 42 Exhibit G – Attachment C – 43 Exhibit G – Attachment C – 44 Exhibit G – Attachment C – 45 Exhibit G – Attachment C – 46 Exhibit G – Attachment C – 47 Exhibit G – Attachment C – 48 Exhibit G – Attachment C – 49 Exhibit G – Attachment D – 50 ATTACHMENT D TO GENERAL CONDITIONS AND TECHNICAL SPECIFICATIONS CONSTRUCTION MEETING MINUTES TEMPLATE [See attached.] Exhibit G – Attachment D – 51 <PROJECT NAME> PROGRESS MEETING #XX MINUTES Date: 2014-01-01 Time of Meeting: 0:00 Location: Building XX, Room YY MEETING ATTENDEES Company Name Present (PT) attended part-time (Y) attended in person (CC) attended via conference call Minutes by: Xxxx Xxx Distribution: [Progress Meeting Quorum] CORRECTIONS OR CLARIFICATIONS TO THE MEETING NOTES SHOULD BE DIRECTED TO: Xxxx Xxx  Section 1: Contract No. Date of Entry Action POC Due Date Status  Section 2: Engineering 01 - 205 executed on Sep 5, 2001 between CITY and Design  Section 3: Project/Construction Schedule Review  Section 4: RFIs CAL WATER and Submittals  Section attached hereto as Exhibit "5: Pending Change Order (PCO), Change Order (CO), and Pay Application  Section 6: General Discussion / Site Issues  Section 7: IOR and SI Topics  Section 8: Scheduled Testing and Inspection Exhibit G – Attachment D – 52  Section 9: End of Meeting Minutes (note these items will be applied to the appropriate sections in the next meeting’s agenda) Exhibit G – Attachment E – 53 ATTACHMENT E TO GENERAL CONDITIONS AND TECHNICAL SPECIFICATIONS CHANGE FORM TEMPLATES This is a Change Order (“CO”) to the Power Purchase Agreement between REC Solar Commercial Corporation, a Delaware corporation (“Provider”) and Eastern Municipal Water District, a California municipal water district (“District”) dated April 3, 2019 (the “PPA”). PARTIES/PROJECT/SITE INFORMATION Project: (Name and Address) REC Solar Project Number: Provider:".

Operations and Maintenance. Provider shall be responsible for all operations and maintenance of the Solar Facility. The operations and maintenance of the Solar Facility shall include at a minimum: 8.1 All preventative maintenance required to maintain all equipment warranties. 8.2 Provider shall provide erosion control and security for the Solar Facility throughout the Term at its sole expense. Provider shall also be responsible for Solar Facility weed abatement throughout the Term and in compliance with the provisions of the Site Weed Abatement Requirements set forth in Attachment L. 8.3 Performance of dust control during construction of the Solar Facility. Provider shall maintain one complete Engineering Design Package throughout the Term and update with any changes made from the as-built drawings provided at the completion of construction. 8.4 In the event that ninety-five percent (95%) of the Annual Production Estimate) is not met in a given Contract Year, District retains the right to require Provider to conduct one (1) additional panel washing that must be conducted by Provider after May 15th and prior to July 15th of the next Contract Year. District shall provide access to water at its nearest available location for washing at no cost to Provider. 8.5 All pyranometers shall be cleaned at the same time as, and with similar care, as the module washing. Exhibit G – Attachment A – 33 ATTACHMENT A TO GENERAL CONDITIONS AND TECHNICAL SPECIFICATIONS PRELIMINARY ENGINEERING DESIGN PACKAGE Exhibit G – Attachment A – 34 Exhibit G – Attachment B – 35 ATTACHMENT B TO GENERAL CONDITIONS AND TECHNICAL SPECIFICATIONS SITE ASSESSMENT TABLE Exhibit G – Attachment C – 36 ATTACHMENT C TO GENERAL CONDITIONS AND TECHNICAL SPECIFICATIONS PROJECT SCHEDULE Provider will develop, with input from District, a Preliminary Project Schedule and a Final Project Schedule using Primavera P6 or equivalent and submit the Final Project Schedule to District within thirty (30) days after the Effective Date. Provider and District will establish a weekly construction meeting at which time the work of the previous week will be reviewed, and a three (3) week look- ahead schedule will be coordinated. The three (3) week look-ahead schedule shall be created in MS Excel® and present the list of activities occurring at the Site on a daily basis. The work on the Project shall be completed on or before the Commercial Operation Date in accordance with the Final Project Schedule set forth below and as may be amended from time to time during the Term. The Final Project Schedule shall only be modified upon the written approval of District. Any modified schedule approved by District shall replace the existing Final Project Schedule set forth below. The Final Project Schedule (Anticipated Key Engineering and Construction Dates) shall include, at a minimum, the following and shall become a part of the Agreement upon District’s approval: 50%, 90% and 100% drawings due to District District review of 50%, 90%, 100% drawings Permit approval Procurement Site preparation Construction start Electrical & Mechanical completion Interconnection sign off Testing & commissioning Utility meter and rate switch completion PTO Final completion date The Final Project Schedule shall not show more than ten percent (10%) of the total activities as critical, and no activity shall have duration longer than thirty (30) days. The Final Project Schedule shall indicate the beginning and completion dates of all phases of construction and shall use the “critical path method” for the planning and scheduling of all work required. The schedule will separately identify those milestones or events that must be completed before other portions of the work can be accomplished. The Final Project Schedule shall incorporate float for inclement weather and resulting muddy site conditions due to rain (separate from any event of Force Majeure) and shall also include any potential acceleration paths. Scheduled float for non-working rain- related days and resulting muddy site conditions shall be based upon the latest and nearest available data from acceptable data issued from the National Weather Service. Exhibit G – Attachment C – 37 A monthly Project schedule update shall be provided to accurately indicate the actual progress of the work against the baseline Final Project Schedule for the prior month, and the remaining planned completion of the work. The scheduling is necessary for District’s adequate monitoring of the progress of the work. District may disapprove such a schedule and require modification to it if, in the opinion of District, adherence to the progress schedule will cause the work not to be completed in accordance with the Agreement. Provider shall adhere to any such modifications required by District. Between the monthly schedule updates, it is the obligation of Provider to monitor the progress of the work against the current construction schedule activities, and to notify District in writing of all changed activity start dates and finish dates. Provider will exchange scheduling information with Subcontractors and suppliers. Provider will order work, equipment and materials with sufficient lead time to avoid interruption of the work. Provider shall also, if requested by District, provide revised schedules within fifteen (15) days if, at any time, District considers the Commercial Operation Date to be in jeopardy. The revised schedule shall be designed to show how Provider intends to accomplish the work to meet the original Commercial Operation Date, as such date may be extended in accordance with the PPA. The form and method employed by Provider shall be the same as for the original progress schedule. Provider shall modify any portions of the schedule that become infeasible because of “activities behind schedule” or for any other valid reason. Provider will provide documents and justification for any schedule changes. An activity that cannot be completed by its original Commercial Operation Date shall be deemed to be behind schedule. IF PROVIDER SUBMITS A REVISED SCHEDULE SHOWING AN EARLIER COMMERCIAL OPERATION DATE FOR THE PROJECT, DISTRICT’S ACCEPTANCE OF THIS REVISED SCHEDULE SHALL NOT ENTITLE PROVIDER TO ANY ADDITIONAL COMPENSATION OR CLAIM DUE TO ANY SUCH REVISED SCHEDULE. Exhibit G – Attachment C – 38 Exhibit G – Attachment C – 39 Exhibit G – Attachment C – 40 Exhibit G – Attachment C – 41 Exhibit G – Attachment C – 42 Exhibit G – Attachment C – 43 Exhibit G – Attachment C – 44 Exhibit G – Attachment C – 45 Exhibit G – Attachment C – 46 Exhibit G – Attachment C – 47 Exhibit G – Attachment C – 48 Exhibit G – Attachment C – 49 Exhibit G – Attachment D – 50 ATTACHMENT D TO GENERAL CONDITIONS AND TECHNICAL SPECIFICATIONS CONSTRUCTION MEETING MINUTES TEMPLATE [See attached.] Exhibit G – Attachment D – 51 <PROJECT NAME> PROGRESS MEETING #XX MINUTES Date: 2014-01-01 Time of Meeting: 0:00 Location: Building XX, Room YY MEETING ATTENDEES Company Name Present (PT) attended part-time (Y) attended in person (CC) attended via conference call Minutes by: Xxxx Xxx Distribution: [Progress Meeting Quorum] CORRECTIONS OR CLARIFICATIONS TO THE MEETING NOTES SHOULD BE DIRECTED TO: Xxxx Xxx  Section 1: Contract No. Date of Entry Action POC Due Date Status  Section 2: Engineering and Design  Section 3: Project/Construction Schedule Review  Section 4: RFIs and Submittals  Section 5: Pending Change Order (PCO), Change Order (CO), and Pay Application  Section 6: General Discussion / Site Issues  Section 7: IOR and SI Topics  Section 8: Scheduled Testing and Inspection Exhibit G – Attachment D – 52  Section 9: End of Meeting Minutes (note these items will be applied to the appropriate sections in the next meeting’s agenda) Exhibit G – Attachment E – 53 ATTACHMENT E TO GENERAL CONDITIONS AND TECHNICAL SPECIFICATIONS CHANGE FORM TEMPLATES This is a Change Order (“CO”) to the Power Purchase Agreement between REC Solar Commercial Corporation, a Delaware corporation (“Provider”) and Eastern Municipal Water District, a California municipal water district (“District”) dated April 3, 2019 (the “PPA”). PARTIES/PROJECT/SITE INFORMATION Project: (Name and Address) REC Solar Project Number: Provider: