Inventory To the extent Inventory held for sale or lease has been produced by any Borrower, it has been and will be produced by such Borrower in accordance with the Federal Fair Labor Standards Act of 1938, as amended, and all rules, regulations and orders thereunder.
Inventories All of the Assets constituting inventory are owned or used by Company, are in good, current, standard and merchantable condition and are not obsolete or defective.
As to Equipment and Inventory Grantor hereby agrees that it shall:
(a) keep all the Equipment and Inventory (other than Inventory in transit and Inventory sold in the ordinary course of business) at the places therefor specified in Section 3.1.1 or, upon 30 days' prior written notice to Agent, at such other places in a jurisdiction where all representations and warranties set forth in Article III (including Section 3.1.6) shall be true and correct, and all action required pursuant to the first sentence of Section 4.1.7 shall have been taken with respect to the Equipment and Inventory;
(b) with respect to any Equipment or Inventory in the possession or control of any Third Party or any of Grantor's agents, notify such Third Party or agent of Agent's security interest in such Equipment or Inventory and, upon Agent's request following the occurrence and during the continuance of an Event of Default, direct such Third Party or agent to hold all such Equipment or Inventory for Agent's account and subject to Agent's instructions;
(c) cause the Equipment to be maintained and preserved in the same condition, repair and working order as when new, ordinary wear and tear excepted, and in accordance with any manufacturer's manual; and forthwith, or in the case of any material loss or damage to any of the Equipment, as quickly as practicable after the occurrence thereof, make or cause to be made all repairs, replacements, and other improvements in connection therewith which are necessary or desirable to such end; and promptly furnish to Agent a statement respecting any loss or damage to any of the Equipment within ten (10) business days after Grantor obtains knowledge of any such loss or damage; and
(d) pay promptly when due all property and other taxes, assessments and governmental charges or levies imposed upon, and all claims (including claims for labor, materials and supplies) against, the Equipment and Inventory, except to the extent the validity thereof is being contested in good faith by appropriate proceedings and for which adequate reserves in accordance with Generally Accepted Accounting Principles have been set aside.
Eligible Inventory For purposes of this Agreement, Eligible Inventory shall exclude any Inventory to which any of the exclusionary criteria set forth below applies. The Administrative Agent shall have the right to establish, modify or eliminate Reserves against Eligible Inventory from time to time in its reasonable credit judgment. In addition, the Administrative Agent reserves the right, at any time and from time to time after the Original Closing Date, to adjust any of the criteria set forth below, to establish new criteria and to adjust the applicable advance rate with respect to Eligible Inventory, in its reasonable credit judgment, subject to the approval of the Supermajority Lenders in the case of adjustments, new criteria, changes in the applicable advance rate or the elimination of Reserves which have the effect of making more credit available. Eligible Inventory shall not include any Inventory of Borrower or any Borrowing Base Guarantor that:
(i) the Collateral Agent, on behalf of Secured Parties, does not have a first priority and exclusive perfected Lien on such Inventory;
(ii) is not located on premises in United States or Canada;
(iii) (A) is located on premises leased by Borrower or a Borrowing Base Guarantor, unless (x) at such location the aggregate value of Inventory exceeds $250,000, and (y) either (1) a reasonably satisfactory Landlord Lien Waiver and Access Agreement has been delivered to the Collateral Agent, or (2) Reserves reasonably satisfactory to the Administrative Agent have been established with respect thereto or (B) is stored with a bailee or warehouseman where the aggregate value of Inventory exceeds $250,000 unless either (x) a reasonably satisfactory, acknowledged bailee waiver letter has been received by the Collateral Agent or (y) Reserves reasonably satisfactory to the Administrative Agent have been established with respect thereto, or (C) is located at an owned location subject to a mortgage in favor of a lender other than the Collateral Agent where the aggregate value of Inventory exceeds $250,000 unless either (x) a reasonably satisfactory mortgagee waiver has been delivered to the Collateral Agent or (y) Reserves reasonably satisfactory to the Administrative Agent have been established with respect thereto;
(iv) is placed on consignment (other than Eligible Consigned Inventory);
(v) is covered by a negotiable document of title, unless such document has been delivered to the Collateral Agent with all necessary endorsements, free and clear of all Liens except those in favor of the Collateral Agent and the Lenders and landlords, carriers, bailees and warehousemen if clause (iii) above has been complied with;
(vi) is to be returned to suppliers;
(vii) is obsolete, unsalable, shopworn, seconds, damaged or unfit for sale;
(viii) is slow moving (in excess of 1-year supply);
(ix) consists of display items, samples or packing or shipping materials, manufacturing supplies or replacement parts (it being understood that Eligible Inventory shall not exclude work-in-process Inventory if it is not excluded in accordance with other criteria set forth herein, unless otherwise determined by the Administrative Agent in its reasonable credit judgment);
(x) is not of a type held for sale in the ordinary course of Borrower’s or any Borrowing Base Guarantor’s, as applicable, business;
(xi) breaches any of the representations or warranties pertaining to Inventory set forth in the Loan Documents;
(xii) consists of Hazardous Material or goods that can be transported or sold only with licenses that are not readily available;
(xiii) is not covered by casualty insurance maintained as required by Section 5.04;
(xiv) consists of custom made Inventory which is not saleable to any other customer or in ordinary course;
(xv) is in transit; or
(xvi) is subject to any licensing arrangement the effect of which would be to limit the ability of Collateral Agent, or any Person selling the Inventory on behalf of Collateral Agent, to sell such Inventory in enforcement of the Collateral Agent’s Liens, without further consent or payment to the licensor or other.
Merchantable Inventory All Inventory is in all material respects of good and marketable quality, free from all material defects, except for Inventory for which adequate reserves have been made.
Raw Materials A. Catalent shall procure Raw Materials only from vendors that are approved in writing by Palatin or otherwise qualified in accordance with the provisions of the Quality Agreement. Catalent shall be responsible for procuring Raw Materials as necessary to meet the Firm Commitment. Catalent shall not be liable for any delay in delivery of Product if (i) Catalent is unable to obtain, in a timely manner, a particular Raw Material necessary for Processing and (ii) Catalent placed orders for such Raw Materials promptly following receipt of Palatin’s Firm Commitment. In the event that any Raw Material becomes subject to purchase lead time beyond the Firm Commitment time frame, the parties will negotiate in good faith an appropriate amendment to this Agreement, including Clause 4.2.
B. In certain instances, Palatin may require a specific supplier, manufacturer or vendor (“Vendor”) to be used for Raw Material. In such an event, (i) such Vendor will be identified in the Specifications and (ii) the Raw Materials from such Vendor shall be deemed Palatin-supplied Materials for purposes of this Agreement. If the cost of the Raw Material from any such Vendor (other than a Vendor specified in the Specifications as of the Effective Date) is greater than Catalent’s costs for the same raw material of equal quality from other vendors, Catalent shall add the difference between Catalent’s cost of the Raw Material and the Vendor’s cost of the Raw Material to the Unit Pricing. Palatin will be responsible for all reasonable, out-of-pocket costs incurred by Catalent associated with qualification of any such Vendor who has not been previously qualified by Catalent.
C. In the event of (i) a Specification change for any reason, (ii) obsolescence of any Raw Material or (iii) termination or expiry of this Agreement, Palatin shall bear the cost of any unused Raw Materials (including packaging), so long as Catalent (a) purchased such Raw Materials in quantities consistent with Palatin’s then current Firm Commitment and any minimum purchase obligations required by the vendor and (b) used commercially reasonable efforts to mitigate such costs by using any such unused Raw Materials in the manufacture of other products.
Packing Specifications 7.3.1 A pack will contain a minimum of one message record or a maximum of 99,999 message records plus a pack header record and a pack trailer record. One transmission can contain a maximum of 99 packs and a minimum of one pack.
Product Specifications (a) Supplier shall manufacture all Products according to the Specifications in effect as of the date of this Agreement, with such changes or additions to the Specifications of the Products related thereto as shall be requested by Buyer in accordance with this Section or as otherwise agreed in writing by the Parties. All other Products shall be manufactured with such Specifications as the Parties shall agree in writing.
(b) Buyer may request changed or additional Specifications for any Product by delivering written notice thereof to Supplier not less than one hundred twenty (120) days in advance of the first Firm Order for such Product to be supplied with such changed or additional Specifications. Notwithstanding the foregoing, if additional advance time would reasonably be required in order to implement the manufacturing processes for production of a Product with any changed or additional Specifications, and to commence manufacture and delivery thereof, Supplier shall so notify Buyer, and Supplier shall not be required to commence delivery of such Product until the passage of such additional time.
(c) Supplier shall be required to accommodate any change of, or additions to, the Specifications for any Product, if and only if (i) in Supplier’s good faith judgment, such changed or additional Specifications would not require Supplier to violate good manufacturing practice, (ii) the representation and warranty of Buyer deemed made pursuant to Subsection (e) below is true and correct, and (iii) Buyer agrees to reimburse Supplier for the incremental costs and expenses incurred by Supplier in accommodating the changed or additional Specifications, including the costs of acquiring any new machinery and tooling. For the avoidance of doubt, such costs and expenses shall be payable by Buyer separately from the cost of Products at such time or times as Supplier shall request.
(d) Supplier shall notify Buyer in writing within thirty (30) days of its receipt of any request for changed or additional Specifications (i) whether Supplier will honor such changed or additional Specifications, (ii) if Supplier declines to honor such changed or additional Specifications, the basis therefor and (iii) if applicable, the estimated costs and expenses that Buyer will be required to reimburse Supplier in respect of the requested changes or additions, as provided in Subsection (c) above. Buyer shall notify Supplier in writing within fifteen (15) days after receiving notice of any required reimbursement whether Buyer agrees to assume such reimbursement obligation.
(e) By its request for any changed or additional Specifications for any Product, Buyer shall be deemed to represent and warrant to Supplier that the manufacture and sale of the Product incorporating Buyer’s changed or additional Specifications, as a result of such incorporation, will not and could not reasonably be expected to (i) violate or conflict with any contract, agreement, arrangement or understanding to which Buyer and/or any of its Affiliates is a party, including this Agreement and any other contract, agreement, arrangement or understanding with Supplier and/or its Affiliates, (ii) infringe on any trademark, service xxxx, copyright, patent, trade secret or other intellectual property rights of any Person, or (iii) violate any Applicable Law. Buyer shall indemnify and hold Supplier and its Affiliates harmless (including with respect to reasonable attorneys’ fees and disbursements) from any breach of this representation and warranty.
Product Labeling The labeling of all Licensed Products sold or offered for sale under this Agreement shall expressly state that the Licensed Product is manufactured under a license from the Medicines Patent Pool.
Returns of Inventory No Borrower shall return any Inventory to a supplier, vendor or other Person, whether for cash, credit or otherwise, unless (a) such return is in the Ordinary Course of Business; (b) no Default, Event of Default or Overadvance exists or would result therefrom; (c) Agent is promptly notified if the aggregate Value of all Inventory returned in any month exceeds $1,000,000; and (d) any payment received by a Borrower for a return is promptly remitted to Agent for application to the Obligations.
