Payment Application Times Sample Clauses

Payment Application Times. The date for each progress payment is indicated in the Agreement between Owner and Contractor. The period of construction work covered by each Application for Payment is the period indicated in the Agreement.
AutoNDA by SimpleDocs
Payment Application Times. The date for each progress payment is indicated in the Agreement between Owner and Contractor. The period covered by each Application for Payment is one month, ending on the last day of the month.
Payment Application Times. Each progress payment date is as indicated in the Agreement or as specified at pre-construction meeting. The period of construction work covered by each Application for Payment is the period indicated in the Agreement or as specified at pre-construction meeting.

Related to Payment Application Times

  • Provisional Application Upon signature of this Compact, and until this Compact has entered into force in accordance with Section 7.3, the Parties will provisionally apply the terms of this Compact; provided that, no MCC Funding, other than Compact Implementation Funding, will be made available or disbursed before this Compact enters into force.

  • Notice, Application In the case of any Loan, the Administrative Agent shall have received a Notice of Borrowing and, in the case of any Issuance of any Letter of Credit, the Issuing Lender and the Administrative Agent shall have received an L/C Application or L/C Amendment Application, as required under Section 3.2.

  • New Application for Licensure Any time after the three-month period has lapsed from the Effective Date of this Agreement and Respondent has paid the Administrative Penalty set forth in Section III, Paragraph 1 of this Order, Respondent may apply for a new mortgage loan originator license or, as applicable, petition for the reinstatement of an MLO Activity Endorsement in any or all of the Participating States with the understanding that each State Mortgage Regulator reserves the rights to fully investigate such application for licensure or petition for reinstatement of an MLO Activity Endorsement and may either approve or deny such application or petition pursuant to the normal process for such licensing or endorsement investigations. No license application or petition described in this paragraph will be denied solely based on the facts, circumstances, or consensual resolution provided for in this Agreement. Respondent further agrees that Respondent must satisfy the Administrative Penalty provision prior to submitting an application for a new mortgage loan originator license or, as applicable, petition for the reinstatement of an MLO Activity Endorsement.

  • DISTRIBUTION OF CONTRACTOR PRICE LIST AND CONTRACT APPENDICES Contractor shall provide Authorized Users with electronic copies of the Contract, including price lists and Appendices, upon request. Contract Updates will be handled as provided in Appendix C – Contract Modification Procedures.

  • Determination of Pass-Through Rates for LIBOR Certificates (a) On each Interest Determination Date so long as any LIBOR Certificates are outstanding, the Trustee will determine LIBOR on the basis of the British Bankers' Association ("BBA") "Interest Settlement Rate" for one-month deposits in U.S. dollars as found on Telerate page 3750 as of 11:00 a.m. London time on each LIBOR Determination Date. "Telerate Page 3750" means the display page currently so designated on the Moneyline Telerate Service (formerly the Dow Jones Markets) (or such other pagx xx may replace that page on that service for the purpose of displaying comparable rates or prices).

  • Application Form To apply for a pole attachment or conduit occupancy license under this Agreement, Applicant shall submit to SWBT two signed copies of the appropriate application forms. SWBT represents that the forms specified in subsections (a)-(b) are forms in use prior to the effective date of this Agreement and that SWBT is in the process of revising such forms to conform to the provisions of this Agreement and to streamline the application process. The parties therefore agree that the forms specified in subsections (a) and (b) will be interim forms only. SWBT reserves the right to change the format and content of these forms upon 60 days written notice to Applicant. (a) To apply for a pole attachment license, Applicant shall submit to SWBT two signed copies of SWBT’s Form SW-9434 (“Access Application and Make- Ready Authorization”) together with completed Form SW-9433 (“Pole Attachments”). An application for a pole attachment license will not be complete or subject to processing by SWBT until these forms have been submitted to SWBT; provided, however, that such forms will be deemed to be substantially complete if they contain the information specified in subsections (c)-(h) below, as applicable. Copies of Forms SW-9433 and SW-9434 are attached to this Agreement as parts of APPENDIX III. (b) To apply for a conduit occupancy license, Applicant shall submit to SWBT two signed copies of SWBT’s Form SW-9434 (“Access Application and Make-Ready Authorization”) together with completed Form SW-9435 (“Conduit Occupancy”). An application for a conduit occupancy license will not be complete or subject to processing by SWBT until these forms have been submitted to SWBT; provided, however, that such forms will be deemed to be substantially complete if they contain the information specified in subsections (c)-(h) below, as applicable. Copies of Forms SW-9434 and SW-9435 are attached to this Agreement as parts of APPENDIX III. (c) Each application for a license under this Agreement shall include, at a minimum, the following information: (1) the poles, ducts, and conduits (including all manholes) along Applicant’s proposed route to or within which Applicant desires to attach or place its facilities; (2) a description of the facilities to be attached to SWBT’s poles and a description of the facilities to be placed within each component of SWBT’s conduit system (including but not limited to ducts, conduits, manholes, and handholes) along the proposed route; (3) for poles, the proposed points of attachment; (4) for building entrance or building distribution ducts or conduits or other space within a building, a conspicuous statement, as required by Section 5.06 of this Agreement, that the application pertains to a building entrance or building distribution duct or conduit or other space within a building; (5) if applicable, a conspicuous notation that the space requested is not to be assigned (or billed) to Applicant until SWBT has received Applicant’s written instruction to make such assignment or issued a license authorizing Applicant to occupy the space requested; and (6) if applicable, a conspicuous statement that Applicant intends to occupy the space before the issuance of a license, as provided in Section 8.03 of this Agreement. (d) Facilities descriptions which apply to multiple pole attachments or conduit occupancies need only be described once on any form. Facilities descriptions shall include, at a minimum, the following information: (1) the number and types of cables, including the physical size (diameter) and weight (weight per foot); (2) the number and types of strands, if any, which will be used to support the cables, including the rated holding capacity expressed in thousand pound increments (e.g., 2.2M) of such strands; and (3) sufficient information to identify and describe the physical characteristics (size, dimensions, and weight) of apparatus enclosures and other facilities to be attached to SWBT’s poles or placed in SWBT’s conduit system. (e) When it appears to Applicant that facilities modification, capacity expansion, or make-ready work may be required to accommodate Applicant’s access requests, Applicant shall describe the facilities modification, capacity expansion, or make-ready work which Applicant proposes. Applicant shall also describe its plans, if any, to use any infrequent construction technique or connectivity solution authorized under Section 6.03 to avoid high or unusual expenditures and state its reasons for the use of such technique or solution. (f) Applicant acknowledges that the poles along a particular pole line or route may include poles owned by firms (such as electric utilities) other than SWBT, that it may be necessary for SWBT to rearrange its facilities or perform other make-ready work on poles other than poles it owns or controls in order to accommodate Applicant’s request for access to SWBT’s poles and that, at the time an application is submitted, it may be difficult for Applicant to determine with certainty whether a particular pole is owned or controlled by SWBT or by another entity. Accordingly, the application shall, to the extent feasible, identify all poles utilized by SWBT (without regard to ownership) along Applicant’s proposed route. (g) Each application for a license under this Agreement shall be accompanied by a construction schedule showing Applicant’s projected dates for beginning and completing construction at the sites specified in the application. Information on this schedule may be used by SWBT’s engineering and outside plant construction personnel in scheduling work required to process Applicant’s applications and scheduling such capacity expansions, make- ready work, and facilities modifications, if any, as may be necessary to accommodate Applicant’s facilities. (h) Applicant may include multiple cables in a single license application and may provide multiple services (e.g., CATV and non-CATV services) under the same cable sheath or jacket. When both CATV and non-CATV services are provided under the same cable sheath or jacket, or CATV and non-CATV services are provided using different cables attached or lashed to the same strand or otherwise occupying the same space on a pole or the same duct or inner duct within a conduit, Applicant will so advise SWBT and SWBT shall, if permitted by law, adjust its charges to enable SWBT to charge Applicant the rate applicable to telecommunications carriers rather than the rate applicable to cable television systems solely to provide cable service.

  • Patent Applications It is understood by the parties that, pursuant to the Baylor Technology Transfer Agreement, MAS has the initial responsibility for filing, prosecution and maintenance of Patents and Patent Applications covering the Baylor Technology. The parties agree that, as between MAS and CTI, MAS shall be responsible for deciding whether and how to file, prosecute and maintain the Patents and Patent Applications, provided that: (a) all decisions of MAS (whether substantive or procedural) concerning whether and how to file, prosecute and/or maintain any Patents and Patent Applications shall be acceptable to CTI, such acceptance not to be unreasonably withheld; (b) with respect to any action permitted under Section 5.5 of the Baylor Technology Transfer Agreement or Section 5.5 of this Agreement, MAS will use legal counsel reasonably acceptable to CTI; (c) MAS will provide CTI with (i) drafts of all filings relating to the Patents and Patent Applications and (ii) drafts of all correspondence to be sent by MAS to Baylor, the Patent and Trademark Office (the “PTO”) or any third party relating to the Patents and Patent Applications. Final versions of all such filings and correspondence shall be acceptable to CTI, such acceptance not to be unreasonably withheld; (d) MAS will promptly provide CTI with copies of any notices and other correspondence received by CTI from Baylor, the PTO or any other third party relating to the Patents and Patent Applications, including, but not limited to, any notices received by MAS pursuant to Section 5.5 of the Baylor Technology Transfer Agreement; (e) MAS will, if requested by CTI, provide notice to Baylor under any of the circumstances permitting notice pursuant to Section 5.5 of the Baylor Technology Transfer Agreement; (f) MAS agrees to cooperate with CTI to whatever extent is reasonably necessary to procure patent protection of any rights regarding the Licensed Technology and agrees to execute any and all documents to give CTI the full benefit of the sublicenses and licenses granted herein; (g) MAS represents and warrants that, as of the Effective Date, it has not received any notices from Baylor pursuant to Section 5.5(c) or Section 5.5(d) of the Baylor Technology Transfer Agreement. In the event MAS receives any notices from Baylor pursuant to Section 5.5(c) or Section 5.5(d) of the Baylor Technology Transfer Agreement after the Effective Date. MAS will provide a copy of such notice to CTI within five (5) business days of receipt of such notice by MAS. MAS will then take all actions requested by CTI to allow CTI to retain its rights granted under this Agreement, including, but not limited to, promptly notifying Baylor in the event CTI wishes MAS to proceed with any actions in connection with the Patents or Patent Applications.

  • Paid Claims without Supporting Documentation Any Paid Claim for which Xxxxxxx cannot produce documentation shall be considered an error and the total reimbursement received by Xxxxxxx for such Paid Claim shall be deemed an Overpayment. Replacement sampling for Paid Claims with missing documentation is not permitted.

  • Application Process The employees wishing to enter into a job share arrangement will apply in writing to the Employer and forward a copy to the Union outlining the proposed commencement date of the job share, how the hours and days of work will be shared and how communication and continuity of work will be maintained. The Employer shall communicate a decision on a job share request in writing to the applicants. Applications to Job Sharing shall not be unreasonably denied.

  • Interest Rates; Benchmark Notification The interest rate on a Loan denominated in dollars may be derived from an interest rate benchmark that may be discontinued or is, or may in the future become, the subject of regulatory reform. Upon the occurrence of a Benchmark Transition Event, Section 2.14(b) provides a mechanism for determining an alternative rate of interest. The Administrative Agent does not warrant or accept any responsibility for, and shall not have any liability with respect to, the administration, submission, performance or any other matter related to any interest rate used in this Agreement, or with respect to any alternative or successor rate thereto, or replacement rate thereof, including without limitation, whether the composition or characteristics of any such alternative, successor or replacement reference rate will be similar to, or produce the same value or economic equivalence of, the existing interest rate being replaced or have the same volume or liquidity as did any existing interest rate prior to its discontinuance or unavailability. The Administrative Agent and its affiliates and/or other related entities may engage in transactions that affect the calculation of any interest rate used in this Agreement or any alternative, successor or alternative rate (including any Benchmark Replacement) and/or any relevant adjustments thereto, in each case, in a manner adverse to the Borrower. The Administrative Agent may select information sources or services in its reasonable discretion to ascertain any interest rate used in this Agreement, any component thereof, or rates referenced in the definition thereof, in each case pursuant to the terms of this Agreement, and shall have no liability to the Borrower, any Lender or any other person or entity for damages of any kind, including direct or indirect, special, punitive, incidental or consequential damages, costs, losses or expenses (whether in tort, contract or otherwise and whether at law or in equity), for any error or calculation of any such rate (or component thereof) provided by any such information source or service.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!