Payment for Hardware Sample Clauses

Payment for Hardware. Subject to the parties’ agreement that Contractor will provide any Hardware under this Contract, Agency will pay Contractor for any Hardware delivered under this Contract upon Agency’s Acceptance of the Hardware in accordance with the prices and delivery terms negotiated by the parties and memorialized in Exhibit L.
AutoNDA by SimpleDocs
Payment for Hardware. Payment for hardware ordered by Channel Partner is due to UMBRA upon receipt of the order. Minimum Order Quantity is 20 units, with lead time on delivery of hardware by UMBRA after receiving payment being three weeks. Hardware must be paid for to UMBRA’s Hong Kong account with HSBC. Bank name:Hong Kong and Shanghai Banking Corporation Bank address:HSBC Xxxxxxxx, Xx.0 Xxxxxx Xxxx Xxxxxxx, Xxxx Xxxx Account Name:UMBRA Technologies (HK) Limited Account No.:000-000000-000 SWIFT Code:XXXXXXXXXXX For payments originating outside of Hong Kong, a USD 00 XX charge applies to cover bank handling fees.
Payment for Hardware. Unless otherwise agreed to in writing, payment for Hardware shall in no case be contingent upon performance or delivery of consulting or Managed Services purchased with such Hardware.
Payment for Hardware. Subject to Sections 6.3 and 6.5, Agency shall pay Contractor for Hardware delivered under this Contract upon Agency’s acceptance of the Hardware, in the amount set forth for the Hardware in Contractor’s Proposal, unless different prices are approved by Agency in the Statement of Work.

Related to Payment for Hardware

  • PAYMENT FOR WORK The H-GAC Customer is responsible for making payment to the Contractor upon delivery and acceptance of the goods or completion of the services and submission of the subsequent invoice.

  • PAYMENT FOR GOODS AND SERVICES a. DIR Customer shall comply with Chapter 2251, Texas Government Code, or applicable local law, in making payments to the Vendor. Payment under a DIR Contract shall not foreclose the right to recover wrongful payments. b. Payments must be made in accordance with laws and procedures applicable to DIR Customer. c. DIR Customer agrees to pay the rates and/or prices set by DIR with its vendors. DIR Customer understands these rates and/or prices include a DIR administrative fee. d. All purchases executed under a DIR Contract will require a DIR Customer purchase order.

  • Payment for Services Contractor shall exert reasonable and diligent efforts to collect prompt payment from the Commonwealth. Contractor shall pay Subcontractor in proportion to amounts received from the Commonwealth which are attributable to the Services performed by Subcontractor. Contractor shall pay Subcontractor within fourteen (14) days after the Contractor receives such payment from the Commonwealth, unless the parties expressly agree upon a different payment schedule or structure as set forth below: ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________.

  • Payment for Improvements If payment is made directly to contractors, Tenant shall (i) comply with Landlord's requirements for final lien releases and waivers in connection with Tenant's payment for work to contractors, and (ii) sign Landlord's standard contractor's rules and regulations. If Tenant orders any work directly from Landlord, Tenant shall pay to Landlord an amount equal to five percent of the cost of such work to compensate Landlord for all overhead, general conditions, fees and other costs and expenses arising from Landlord's involvement with such work. If Tenant does not order any work directly from Landlord, Tenant shall reimburse Landlord for Landlord's reasonable, actual, out-of-pocket costs and expenses actually incurred in connection with Landlord's review of such work.

  • Payment for TIPS Sales TIPS Members may make payments for TIPS Sales directly to Vendor, Vendor’s Authorized Reseller, or as otherwise agreed to in the applicable Supplemental Agreement after receipt of the invoice and in compliance with applicable payment statutes. Regardless of how payment is issued or received for a TIPS Sale, Vendor is responsible for all reporting and TIPS Administration Fee payment requirements as stated herein.

  • Payment for Overtime 1. Except as provided in 2.C.3., below, overtime shall be compensated at one and one-half (1 1/2) times the regular rate. 2. Except as provided in 2.C.3., below, for all regular, limited-term and probationary employees, overtime may be converted to compensatory time or paid for at the option of the agency/department. Consideration shall be given to effectuating the wishes of employees. The maximum number of CTO hours which may be accrued by any employee is eighty (80). If an employee accrues 80 hours of CTO, he/she cannot accrue additional CTO until he/she uses some of the hours in his/her bank; instead, employees will be paid for all overtime work performed in excess of that amount. 3. Overtime hours worked by extra help employees shall be paid. 4. Compensatory time earned and accrued by an employee in excess of thirty-two (32) hours may be scheduled off for an employee by his or her agency/department; however, consideration shall be given to effectuating the wishes of those employees requesting specific compensatory time off periods. 5. No scheduled compensatory time off will be cancelled except in cases of emergency. 6. In no case may an employee's work schedule be changed during the workweek when the purpose of such change is to avoid overtime compensation. 7. Time worked as overtime shall not be used to earn fringe benefits or to serve out probation or merit increase periods. Compensatory time off may be used as part of the established workweek to earn fringe benefits and to serve out probationary and merit increase periods. 8. An employee separating from the County service shall be paid for accumulated compensatory time in a lump sum payment.

  • Payment for Working Overtime (a) For all work done outside ordinary hours, the rates of pay will be time and a half for the first two hours and double time thereafter. (b) Except as provided in clause 8.4, in computing overtime each day’s work will stand alone. (c) To avoid doubt, overtime provisions for shift workers are contained in clause 10.7.

  • Payment for Project Services As full consideration for the Services to be performed by Contractor, City agrees to pay Contractor as set forth in accordance with the bid and not to exceed fee of $215,500.00 for the project. A monthly progress payment in the amount of ninety-five percent (95%) of the value of the work completed may be made every thirty (30) days upon application by the Contractor and certification by the Project Manager that such work has been completed. Partial payments will be made once each month as the work satisfactorily progresses and after acceptance by the authorized City representative. The progress estimates shall be based upon materials in place, or on the job site and invoiced, and labor expended thereon. From the total of the amount ascertained will be deducted an amount equivalent to five percent (5%) of the whole, which five percent (5%) will be retained by the City until after completion of the entire Contract in an acceptable manner. Any time after fifty percent (50%) of the value of the work has been completed, the City will make any of the remaining partial payments in full. No such estimates or payments shall be required to be made, when, in the judgment of the City Project Manager, the work is not proceeding in accordance with the provision of the Contract, or when in his judgment the total value of the work done since last estimate amounts to less than Five Hundred Dollars ($500.00). The cost of materials conforming to the plans and specifications (materials being those which are required to be contained and incorporated in a finished contract bid item) delivered to the project and not at the time incorporated in the work, may also be included in the estimate for payment. No such estimate or payment shall be construed to be an acceptance of any defective work or improper material. The Contractor shall be responsible for, and shall not remove from the project any material that has been included in the estimate for payment. Final payment shall be made upon the Project Manager certifying that the Contractor has satisfactorily completed the work in conformity with the Contract Documents.

  • Payment for Forest Products Delivered Purchaser agrees to pay the State for delivered forest products at the following rate: $0.00/MBF $250.00/MBF for incorrect species delivery* $20/mbf for Utility logs (Adjusted Gross). Purchaser agrees to increase the above delivered payment rate as approved by the State in the event the location of delivery is changed per the G-026.2 clause. Purchaser will not be billed for any delivered logs that are scaled as containing metal. *When two or more log sorts from this project are delivered to the same destination, the species contained in them are not eligible for the species price reduction. Forest Products delivered that do not meet the sorting specifications in G-022.2 are considered mis-sorts. Purchaser receiving mis-sort Forest Products is required to pay the State at the bid price under this contract. However, when mis-sorted Forest Products amount to more than 5% of the total delivered sort volume, Purchaser may request approval for payment reduction for delivered volume exceeding the mis-sort threshold. Requests for payment reduction must be submitted to the State in writing prior to contract expiration. Eligibility for mis-sort payment reduction is subject to State approval and shall be determined by the State’s delivered product analysis. Forest Products determined by the State eligible for mis-sort price reduction are not eligible for any other price adjustments. Payment reduction for Forest Products deemed mis-sorted will be calculated as follows: Payment Reduction = (B x M) x R M = Mis-sorted volume exceeding threshold excluding utility R = Reduction factor* 0.2 for diameter mis-sort 0.3 for high quality mis-sort *Logs eligible for payment reduction based on multiple reduction factors will be calculated at the higher payment reduction factor. Third-party scaling organization information is required to determine Xxxxxxxx mbf for payment reduction purposes. Value will be derived from the applicable sort value as described in this contract. Scale information for determining mis-sort payment reduction eligibility must be obtained from roll-out scale. Truck-ramp, sample scaling, and/or bundle scaling information is not acceptable for determining eligibility. Purchaser’s exclusive remedy for mis-sorts shall be the payment reduction described in this clause, notwithstanding other provisions in the Uniform Commercial Code Forest Products delivered that do not meet preferred log length specifications or multiples or combinations of preferred lengths and Forest Products delivered not meeting manufacturing standards as described in clause G-024.2 are considered mis- manufactured. Purchaser receiving mis-manufactured Forest Products is required to pay the State at the bid price under this contract. However, when mis-manufactured Forest Products amount to more than 8% of the total delivered sort volume, Purchaser may request approval for payment reduction for delivered volume exceeding the mis-manufacture threshold. Requests for payment reduction must be submitted to the State in writing prior to contract expiration. Eligibility for mis-manufacture payment reduction is subject to State approval and shall be determined by the State’s delivered product analysis. Forest Products determined by the State eligible for mis-manufacture price reductions are not eligible for any other price adjustments. Payment reduction for Forest Products deemed mis-manufactured will be calculated as follows: Payment Reduction = (B x M) x (0.2) Where: B = Bid rate from P-028.2 clause M = Mis-manufactured volume exceeding threshold excluding utility Third-party scaling organization information is required to determine Xxxxxxxx mbf for payment reduction purposes. Value will be derived from the applicable sort value as described in this contract. Scale information for determining mis-manufacture payment reduction eligibility must be obtained from roll-out scale. Truck-ramp, sample scaling, and/or bundle scaling information is not acceptable for determining eligibility. Purchaser’s exclusive remedy for mis-manufacture shall be the payment reduction described in this clause, notwithstanding other provisions in the Uniform Commercial Code.

  • Payment for Labor and Materials (a) Borrower will promptly pay when due all bills and costs for labor, materials, and specifically fabricated materials ("LABOR AND MATERIAL COSTS") incurred in connection with the Property and never permit to exist beyond the due date thereof in respect of the Property or any part thereof any lien or security interest, even though inferior to the liens and the security interests hereof, and in any event never permit to be created or exist in respect of the Property or any part thereof any other or additional lien or security interest other than the liens or security interests hereof except for the Permitted Encumbrances. (b) After prior written notice to Lender, Borrower, at its own expense, may contest by appropriate legal proceeding, promptly initiated and conducted in good faith and with due diligence, the amount or validity or application in whole or in part of any of the Labor and Material Costs, provided that (i) no Event of Default has occurred and is continuing under the Loan Agreement, the Note, this Security Instrument or any of the other Loan Documents, (ii) Borrower is permitted to do so under the provisions of any other mortgage, deed of trust or deed to secure debt affecting the Property, (iii) such proceeding shall suspend the collection of the Labor and Material Costs from Borrower and from the Property or Borrower shall have paid all of the Labor and Material Costs under protest, (iv) such proceeding shall be permitted under and be conducted in accordance with the provisions of any other instrument to which Borrower is subject and shall not constitute a default thereunder, (v) neither the Property nor any part thereof or interest therein will be in danger of being sold, forfeited, terminated, canceled or lost, and (vi) Borrower shall have furnished the security as may be required in the proceeding, or as may be reasonably requested by Lender to insure the payment of any contested Labor and Material Costs, together with all interest and penalties thereon.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!