We use cookies on our site to analyze traffic, enhance your experience, and provide you with tailored content.

For more information visit our privacy policy.

PRODUCTION AND SCHEDULING Sample Clauses

PRODUCTION AND SCHEDULING. Xxxxx at the Xxxxx Facilities shall: (a) Manufacture into Chips all hemlock, balsam, cypress, spruce, fir, red cedar and pine wood not suitable for manufacture into veneer, plywood, lumber or specialty wood products in accordance with the terms, conditions and specifications of this Agreement; (b) Maintain all barking and chipping facilities at the Xxxxx Facilities in first class condition at all times including replacement and repair of equipment as is necessary in order to produce Chips conforming to the specifications, and maintain the chipper knives, face plates, knife holders and anvil in proper condition to produce cleanly cut Chips; and (c) Advise BCFP in writing in the first week of January, April, July and October in each Year of its estimated production of Chips to be sold to BCFP during the ensuing six months. If anticipated production or anticipated delivery of Chips to BCFP is to be less than (***) Units in any one Year then Xxxxx will give to BCFP six months prior written notice of such deficiency and the reasons for and the anticipated deficiency.
Sample 1
PRODUCTION AND SCHEDULING. Shipping dates are estimated and are based upon the Seller being promptly furnished with all information, including shipping instructions, necessary to enable it to proceed with processing the Buyer's order. If no instructions are given, the method and route of shipment are at Seller's discretion. In the event there is a delay in production, shipment or delivery for any reason caused by circumstances beyond the Seller's control, the dates for delivery will be extended for a period equal to the time lost by reason of such delay. The Seller shall not be liable for any damages incurred by the Buyer as a result of a delay in or failure of delivery caused by circumstances that are not entirely within Seller's control. In no event shall the Seller be liable for special, real, liquidated, or consequential damages.
Sample 1

Related to PRODUCTION AND SCHEDULING

  • Dispatch and Scheduling 6.1.1 The SPD shall be entirely responsible to schedule its power as per the applicable regulations / requirements / guidelines of CERC / SERC /SLDC / RLDC or any other competent agency and same being recognized by the RLDC/SLDC or any other competent authority / agency as per applicable regulation/ law / direction and maintain compliance to the applicable Codes/ Grid Code requirements and directions, if any, as specified by concerned SLDC/RLDC from time to time. Any deviation from the schedule will attract the provisions of applicable regulation / guidelines / directions and any financial implication on account of this shall be on the account of the SPD. 6.1.2 The SPD shall be responsible for directly coordinating and dealing with the Buying Entity, State Load Dispatch Centres, Regional Power Committees, and other authorities in all respects in regard to declaration of availability, scheduling and dispatch of power and due compliance with deviation and settlement mechanism and the applicable Grid code Regulations, acknowledging that the SPD and Buying Entity are the Grid connected entities and SECI as an Intermediary Procurer/ trading licensee is not a Grid connected entity in respect of the power contracted under this Agreement. 6.1.3 The SPD shall be responsible for any deviation from scheduling and for any resultant liabilities on account of charges for deviation as per applicable regulations. UI charges on this account shall be directly paid by the SPD. 6.1.4 Auxiliary power consumption will be treated as per the concerned Central/State regulations. 6.1.5 Further, in case of any difference in scheduled energy at the interfaces of all the RLDCs concerned for the corridor of the power flow, including the RLDC of the Buying Entity, SECI will make payments corresponding to the lowest of the individual energy values to the SPD, until rectification of the above error.

  • HOURS OF WORK AND SCHEDULING 15.01 The normal hours of work for an employee are not a guarantee of work per day or per week, or a guarantee of days of work per week. The normal hours of work shall be seven and one-half (7-1/2) hours per day, and seventy-five (75) hours in any bi-weekly period. 15.02 The normal daily shift shall consist of seven and one-half (7 ½) consecutive hours, exclusive of a one-half (1/2) hour unpaid meal period. For employees working the night shift, this one-half (1/2) hour will be paid. Employees shall be entitled to a fifteen (15) minute paid break during each half of the normal daily shift, at a time designated by the Employer. An employee may combine her rest periods in order to have one (1) thirty (30) minute break, providing she has prior approval from the Director of Nursing. When a meal period is interrupted requiring an employee to attend to a work related problem, then the balance of the unused meal period will be taken within two (2) hours of the interruption. If the employee is unable to reschedule such time, she shall be paid time and one-half (1½) her regular straight time hourly rate for all time worked in excess of her normal daily hours, in accordance with Article 16.01. 15.03 Employees required for reporting purposes shall remain at work for a period of up to fifteen (15) minutes which shall be unpaid. Should the reporting time extend beyond fifteen (15) minutes however, the entire period shall be considered overtime for the purposes of payment. 15.04 Requests for change in posted work schedules must be submitted in writing and co-signed by the employee willing to exchange days off or shifts and are subject to the discretion of the Administrator or her designate. In any event, it is understood that such a change initiated by the employee and approved by the Employer shall not result in overtime compensation or payment or any other claims on the Employer by any employee under the terms of this Agreement. 15.05 Where there is a change to Daylight Savings from Standard Time or vice-versa, an employee who is scheduled and works a full shift shall be paid for the actual hours worked at her regular straight time hourly rate. 15.06 There shall be no split shifts. (a) There shall be a minimum of sixteen (16) hours off between changes of shift unless mutually agreed otherwise. (b) An employee shall not be required to work more than seven (7) consecutive days without days off, unless mutually agreed to by the employee and the Employer. (a) Any employee who is working a permanent shift as of December 31, 1996 shall not be transferred to another shift without their consent. (b) Where possible, the employee will not be scheduled to work more than two

  • RECOGNITION AND SCOPE 1.01 The Company agrees to recognize the Union as the sole collective bargaining agent for employees covered by this Agreement. 1.02 This Agreement shall apply to all Craft and Services employees of the Company covered by the certification order of The Canada Labour Relations Board dated May 28, 1976. When the parties mutually agree that a new occupation established during the term of this Agreement has clearly a number of significant points in common with the other occupations within the unit, such new occupation shall fall within the scope of this Agreement.

  • Records and Schedules of Equipment Each Borrower shall keep accurate and complete records of its Equipment, including kind, quality, quantity, cost, acquisitions and dispositions thereof, and shall submit to Agent, on such periodic basis as Agent may request, a current schedule thereof, in form satisfactory to Agent. Promptly upon request, Borrowers shall deliver to Agent evidence of their ownership or interests in any Equipment.

  • Exhibits and Schedules The Exhibits and Schedules shall be construed with and as an integral part of this Agreement to the same extent as if the same had been set forth verbatim herein.

  • Introduction and Background The purpose of this Schedule 2 (Contract Services and Contract Supplies) is to set out the characteristics of the Contract Services and/or Contract Supplies (as the case may be) and Funding that the Provider will be required to make available to all Contracting Authorities in relation to Lot 1 and/or Lot 2 (as the case may be) and to provide a description of what the Contract Services and/or Contract Supplies (as the case may be) and Funding will entail.

  • Definitions and Schedules 1.1 Words and phrases contained in this Agreement (whether capitalized or not) that are not defined in this Agreement have the meanings given to them in the Electricity Act, 1998, the Ontario Energy Board Act, 1998, any regulations made under either of those Acts, or the Code. 1.2 The following schedules form part of this Agreement: Schedule A – Application and Connection Cost Agreement (recitals) Schedule B – Single Line Diagram, Connection Point and Location of Facilities (section 2.3) Schedule C – List of Other Contracts (section 3.4) Schedule D – Technical and Operating Requirements (section 4.1(d)) Schedule E – Billing and Settlement Procedures (section 5.3) Schedule F – Contacts for Notice (section 12.1) Schedule G – Dispute Resolution (section 16.1) 1) Where a schedule is to be completed by the Parties, the Parties may not include in that schedule a provision that would be contrary to or inconsistent with the Code or the remainder of this Agreement.

  • Clauses and Schedules Any reference in this Agreement to a Clause or a sub-clause or a Schedule is, unless otherwise stated, to a clause or a sub-clause hereof or a schedule hereto.

  • Introduction and Purpose Introduction • Neighbourhood Development Plans • Neighbourhood Development Orders

  • Production of Witnesses; Records; Cooperation (a) After the Effective Time, each Party shall use its commercially reasonable efforts to make available to the other Party, upon written request, the former, current and future directors, officers, employees, other personnel and agents of the members of its respective Group as witnesses and any books, records or other documents within its control or which it otherwise has the ability to make available without undue burden, to the extent that any such Person (giving consideration to business demands of such directors, officers, employees, other personnel and agents) or books, records or other documents may reasonably be required in connection with any Action in which the requesting Party (or member of its Group) may from time to time be involved, regardless of whether such Action is a matter with respect to which indemnification may be sought hereunder. The requesting Party shall bear all costs and expenses in connection therewith. (b) If an Indemnifying Party chooses to defend or to seek to compromise or settle any Third-Party Claim, the other Party shall make available to such Indemnifying Party, upon written request, the former, current and future directors, officers, employees, other personnel and agents of the members of its respective Group as witnesses and any books, records or other documents within its control or which it otherwise has the ability to make available without undue burden, to the extent that any such Person (giving consideration to business demands of such directors, officers, employees, other personnel and agents) or books, records or other documents may reasonably be required in connection with such defense, settlement or compromise, or such prosecution, evaluation or pursuit, as the case may be, and shall otherwise cooperate in such defense, settlement or compromise, or such prosecution, evaluation or pursuit, as the case may be. (c) Without limiting the foregoing, the Parties shall cooperate and consult to the extent reasonably necessary with respect to any Actions. (d) Without limiting any provision of this Section 6.7, each of the Parties agrees to cooperate, and to cause each member of its respective Group to cooperate, with each other in the defense of any infringement or similar claim with respect any Intellectual Property and shall not claim to acknowledge, or permit any member of its respective Group to claim to acknowledge, the validity or infringing use of any Intellectual Property of a third Person in a manner that would hamper or undermine the defense of such infringement or similar claim. (e) The obligation of the Parties to provide witnesses pursuant to this Section 6.7 is intended to be interpreted in a manner so as to facilitate cooperation and shall include the obligation to provide as witnesses inventors and other officers without regard to whether the witness or the employer of the witness could assert a possible business conflict (subject to the exception set forth in the first sentence of Section 6.7(a)).

Most Referenced Clauses

Most Referenced Definitions