Proposed Cost Sample Clauses

Proposed Cost evaluation of the fee proposal, including both one-time and ongoing costs.
AutoNDA by SimpleDocs
Proposed Cost. Predesign / Programming (Phases 1-4): $291,495** Concept Design (Phases 5-7): $269,985*** Total: $561,480 *Per Fee Worksheet Dated 30 September 2019 **Includes Design Fees; Boundary / Topo Survey; Geotechnical Report; Stormwater Analysis; Traffic Impact Study; and standard reimbursables / travel (without markups). ***Includes Design Fees; Cost Estimates and standard reimbursables / travel.

Related to Proposed Cost

  • Increased Cost (a) If, after the Closing Date, the adoption of, or any change in, any applicable law, rule or regulation, or any change in the interpretation or administration of any applicable law, rule or regulation by any Governmental Authority, central bank or comparable agency charged with the interpretation or administration thereof, or compliance by any Lender with any request or directive (whether or not having the force of law) of any such authority, central bank or comparable agency: (i) shall impose, modify or deem applicable any reserve (including any reserve imposed by the FRB, but excluding any reserve included in the determination of the LIBOR Rate pursuant to Section 2.4), special deposit or similar requirement against assets of, deposits with or for the account of, or credit extended by any Lender; or (ii) shall impose on any Lender any other condition affecting its Loan, its Note or its obligation to make the Loan; and the result of anything described in clauses (i) above and (ii) is to increase the cost to (or to impose a cost on) such Lender of making or maintaining the Loan, or to reduce the amount of any sum received or receivable by such Lender under this Agreement or under its Note with respect thereto, then upon demand by such Lender (which demand shall be accompanied by a statement setting forth the basis for such demand and a calculation of the amount thereof in reasonable detail, a copy of which shall be furnished to Agent), Borrower shall pay directly to such Lender such additional amount as will compensate such Lender for such increased cost or such reduction, so long as such amounts have accrued on or after the day which is 180 days prior to the date on which such Lender first made demand therefor; provided, that if the event giving rise to such costs or reductions has retroactive effect, such 180 day period shall be extended to include the period of retroactive effect. (b) If any Lender shall reasonably determine that any change in, or the adoption or phase-in of, any applicable law, rule or regulation regarding capital adequacy, or any change in the interpretation or administration thereof by any Governmental Authority, central bank or comparable agency charged with the interpretation or administration thereof, or the compliance by any Lender or any Person controlling such Lender with any request or directive regarding capital adequacy (whether or not having the force of law) of any such authority, central bank or comparable agency, has or would have the effect of reducing the rate of return on such Lender’s or such controlling Person’s capital as a consequence of such Lender’s Commitments hereunder to a level below that which such Lender or such controlling Person could have achieved but for such change, adoption, phase-in or compliance (taking into consideration such Lender’s or such controlling Person’s policies with respect to capital adequacy) by an amount deemed by such Lender or such controlling Person to be material, then from time to time, upon demand by such Lender (which demand shall be accompanied by a statement setting forth the basis for such demand and a calculation of the amount thereof in reasonable detail, a copy of which shall be furnished to Agent), Borrower shall pay to such Lender such additional amount as will compensate such Lender or such controlling Person for such reduction, so long as such amounts have accrued on or after the day which is 180 days prior to the date on which such Lender first made demand therefor; provided, that if the event giving rise to such costs or reductions has retroactive effect, such 180 day period shall be extended to include the period of retroactive effect.

  • Increased cost claims (a) A Finance Party intending to make a claim pursuant to Clause 13.1 (Increased costs) shall notify the Agent of the event giving rise to the claim, following which the Agent shall promptly notify the Borrower. (b) Each Finance Party shall, as soon as practicable after a demand by the Agent, provide a certificate confirming the amount of its Increased Costs.

  • Estimated Cost Estimated costs by construction phases for Specified Roads listed in A7 are stated by segments in the Schedule of Items. Such estimated costs are subject to adjustment under B3.3, B5.2, B5.21, B5.212, B5.25, and B5.26. Appropriately adjusted costs shall be made a part of a revised Schedule of Items and shown as adjustments to Timber Sale Account. The revised Schedule of Items shall supersede any prior Schedule of Items when it is dated and signed by Contracting Officer and a copy is furnished to Purchaser.

  • Proposed Goods and Services Proposed Goods and Services pdf D/M/WBE Certification OPTIONAL No response Warranty No response

  • Project Cost An updated cost spreadsheet reflecting the current forecasted cost vs. the latest approved budget vs. the baseline budget should be included in this section. One way to track project cost is to show: (1) Baseline Budget, (2) Latest Approved Budget, (3) Current Forecasted Cost Estimate, (4) Expenditures or Commitments to Date, and (5) Variance between Current Forecasted Cost and Latest Approved Budget. Line items should include all significant cost centers, such as prior costs, right-of-way, preliminary engineering, environmental mitigation, general engineering consultant, section design contracts, construction administration, utilities, construction packages, force accounts/task orders, wrap-up insurance, construction contingencies, management contingencies, and other contingencies. The line items can be broken-up in enough detail such that specific areas of cost change can be sufficiently tracked and future improvements made to the overall cost estimating methodology. A Program Total line should be included at the bottom of the spreadsheet. Narratives, tables, and/or graphs should accompany the updated cost spreadsheet, basically detailing the current cost status, reasons for cost deviations, impacts of cost overruns, and efforts to mitigate cost overruns. The following information should be provided:

  • Response to Objections Each Party retains the right to respond to any objection raised by a Participating Class Member, including the right to file responsive documents in Court no later than five court days prior to the Final Approval Hearing, or as otherwise ordered or accepted by the Court.

  • NOTICE TO MEMBERS REGARDING ATTRIBUTE RESPONSES TIPS VENDORS RESPOND TO ATTRIBUTE QUESTIONS AS PART OF TIPS COMPETITIVE SOLICITATION PROCESS. THE VENDOR’S RESPONSES TO ATTRIBUTE QUESTIONS ARE INCLUDED HEREIN AS “SUPPLIER RESPONSE.” PLEASE BE ADVISED THAT DEVIATIONS, IF ANY, IN VENDOR’S RESPONSE TO ATTRIBUTE QUESTIONS MAY NOT REFLECT VENDOR’S FINAL ATTRIBUTE RESPONSE, WHICH IS SUBJECT TO NEGOTIATIONS PRIOR TO AWARD. PLEASE CONTACT THE TIPS OFFICE AT 866-839- 8477 WITH QUESTIONS OR CONCERNS REGARDING VENDOR ATTRIBUTE RESPONSE DEVIATIONS. PLEASE KEEP IN MIND THAT TIPS DOES NOT PROVIDE LEGAL COUNSEL TO MEMBERS. TIPS RECOMMENDS THAT YOU CONSULT YOUR LEGAL COUNSEL WHEN EXECUTING CONTRACTS WITH OR MAKING PURCHASES FROM TIPS VENDORS. Number: 220105 Addendum 1 Title: Technology Solutions, Products and Services Type: Request for Proposal Issue Date: 1/6/2022 Deadline: 2/18/2022 03:00 PM (CT) Notes: I F YO U ALREAD Y HOL D TIP S CONTRAC T 200105 TECHNOLOGY SOLUTIONS, PRODUCTS AND SERVICES (“200105”) OR 210101 TECHNOLOGY SOLUTIONS, PRODUCTS AND SERVICES ("210101"), YOU DO NOT NEED TO RESPOND TO THIS SOLICITATION UNLESS YOU WISH TO REPLACE 200105 OR 210101 AT THIS TIME. IF YOU HOLD 200105 OR ꞏ TIPS 190103 Web and Cloud Computing Services ꞏ TIPS 181203 Management Software and Services ꞏ TIPS 181204 Notification Systems Address: Region 8 Education Service Center 0000 XX Xxxxxxx 000 Xxxxx Xxxxxxxxx, XX 00000 Phone: +0 (000) 000-0000 Email: xxxx@xxxx-xxx.xxx Address: 000 X XXX 00 Xxxxx 00 Xxxxxxxxxx, XX 00000 Phone: (000) 000-0000 Web Address: xxxxxxxxxxxxx.xxx By submitting your response, you certify that you are authorized to represent and bind your company. If you have not taken exception or deviation to the agreement language in the solicitation attributes, download the AGREEMENT SIGNATURE FORM from the "ATTACHMENTS" tab. This PDF document is a fillable form. Download the document to your computer, fill in the requested company information, print the file, SIGN the form, SCAN the completed and signed AGREEMENT SIGNATURE FORM, and upload here. If you have taken exception to any of the agreement language and noted the exception in the deviations section of the attributes for the agreement, complete the AGREEMENT SIGNATURE FORM, but DO NOT SIGN until those deviations have been negotiated and resolved with TIPS management. Upload the unsigned form here, because this is a required document. All Other Certificates (if applicable) must be scanned and uploaded. If vendor has more than one other certification scan into one document. (PDF Format ONLY) DO NOT UPLOAD encrypted or password protected files. The vendor must download the PRICING SPREADSHEET SHEET from the attachment tab, fill in the requested information and upload the completed spreadsheet. DO NOT UPLOAD encrypted or password protected files.

  • Quality- and Cost-Based Selection Except as ADB may otherwise agree, the Borrower shall apply quality- and cost-based selection for selecting and engaging consulting services.

  • Loop Testing/Trouble Reporting 2.1.6.1 Telepak Networks will be responsible for testing and isolating troubles on the Loops. Telepak Networks must test and isolate trouble to the BellSouth portion of a designed/non-designed unbundled Loop (e.g., UVL-SL2, UCL-D, UVL-SL1, UCL-ND, etc.) before reporting repair to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, Telepak Networks will be required to provide the results of the Telepak Networks test which indicate a problem on the BellSouth provided Loop. 2.1.6.2 Once Telepak Networks has isolated a trouble to the BellSouth provided Loop, and had issued a trouble report to BellSouth on the Loop, BellSouth will take the actions necessary to repair the Loop if a trouble actually exists. BellSouth will repair these Loops in the same time frames that BellSouth repairs similarly situated Loops to its End Users. 2.1.6.3 If Telepak Networks reports a trouble on a non-designed or designed Loop and no trouble actually exists, BellSouth will charge Telepak Networks for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Loop’s working status. 2.1.6.4 In the event BellSouth must dispatch to the end-user’s location more than once due to incorrect or incomplete information provided by Telepak Networks (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will xxxx Xxxxxxx Networks for each additional dispatch required to repair the circuit due to the incorrect/incomplete information provided. BellSouth will assess the applicable Trouble Determination rates from BellSouth’s FCC or state tariffs.

  • PROPOSED MOBILITY PROGRAMME The proposed mobility programme includes the indicative start and end months of the agreed study programme that the student will carry out abroad. The Learning Agreement must include all the educational components to be carried out by the student at the receiving institution (in table A) and it must contain as well the group of educational components that will be replaced in his/her degree by the sending institution (in table B) upon successful completion of the study programme abroad. Additional rows can be added as needed to tables A and B. Additional columns can also be added, for example, to specify the study cycle-level of the educational component. The presentation of this document may also be adapted by the institutions according to their specific needs. However, in every case, the two tables A and B must be kept separated, i.e. they cannot be merged. The objective is to make clear that there needs to be no one to one correspondence between the courses followed abroad and the ones replaced at the sending institutions. The aim is rather that a group of learning outcomes achieved abroad replaces a group of learning outcomes at the sending institution, without having a one to one correspondence between particular modules or courses. A normal academic year of full-time study is normally made up of educational components totalling 60 ECTS* credits. It is recommended that for mobility periods shorter than a full academic year, the educational components selected should equate to a roughly proportionate number of credits. In case the student follows additional educational components beyond those required for his/her degree programme, these additional credits must also be listed in the study programme outlined in table A. When mobility windows are embedded in the curriculum, it will be enough to fill in table B with a single line as described below: Component code (if any) Component title (as indicated in the course catalogue) at the sending institution Semester [autumn / spring] [or term] Number of ECTS* credits Mobility window … Total: 30 Otherwise, the group of components will be included in Table B as follows: Component code (if any) Component title (as indicated in the course catalogue) at the sending institution Semester [autumn / spring] [or term] Number of ECTS* credits Course x … 10 Module y … 10 Laboratory work … 10 Total: 30 The sending institution must fully recognise the number of ECTS* credits contained in table A if there are no changes to the study programme abroad and the student successfully completes it. Any exception to this rule should be clearly stated in an annex of the Learning Agreement and agreed by all parties. Example of justification for non-recognition: the student has already accumulated the number of credits required for his/her degree and does not need some of the credits gained abroad. Since the recognition will be granted to a group of components and it does not need to be based on a one to one correspondence between single educational components, the sending institution must foresee which provisions will apply if the student does not successfully complete some of the educational components from his study programme abroad. A web link towards these provisions should be provided in the Learning Agreement. The student will commit to reach a certain level of language competence in the main language of instruction by the start of the study period. The level of the student will be assessed after his/her selection with the Erasmus+ online assessment tool when available (the results will be sent to the sending institution) or else by any other mean to be decided by the sending institution. A recommended level has been agreed between the sending and receiving institutions in the inter-institutional agreement. In case the student would not already have this level when he/she signs the Learning Agreement, he/she commits to reach it with the support to be provided by the sending or receiving institution (either with courses that can be funded by the organisational support grant or with the Erasmus+ online tutored courses). All parties must sign the document; however, it is not compulsory to circulate papers with original signatures, scanned copies of signatures or digital signatures may be accepted, depending on the national legislation. * In countries where the "ECTS" system it is not in place, in particular for institutions located in partner countries not participating in the Bologna process, "ECTS" needs to be replaced in all tables by the name of the equivalent system that is used and a weblink to an explanation to the system should be added. The section to be completed during the mobility is needed only if changes have to be introduced into the original Learning Agreement. In that case, the section to be completed before the mobility should be kept unchanged and changes should be described in this section. Changes to the mobility study programme should be exceptional, as the three parties have already agreed on a group of educational components that will be taken abroad, in the light of the course catalogue that the receiving institution has committed to publish well in advance of the mobility periods and to update regularly as ECHE holder. However, introducing changes might be unavoidable due to, for example, timetable conflicts. Other reasons for a change can be the request for an extension of the duration of the mobility programme abroad. Such a request can be made by the student at the latest one month before the foreseen end date. These changes to the mobility study programme should be agreed by all parties within four to seven weeks (after the start of each semester). Any party can request changes within the first two to five-week period after regular classes/educational components have started for a given semester. The exact deadline has to be decided by the institutions. The shorter the planned mobility period, the shorter should be the window for changes. All these changes have to be agreed by the three parties within a two-week period following the request. In case of changes due to an extension of the duration of the mobility period, changes should be made as timely as possible as well. Changes to the study programme abroad should be listed in table C and, once they are agreed by all parties, the sending institution commits to fully recognise the number of ECTS credits as presented in table C. Any exception to this rule should be documented in an annex of the Learning Agreement and agreed by all parties. Only if the changes described in table C affect the group of educational components in the student's degree (table B) that will be replaced at the sending institution upon successful completion of the study programme abroad, a revised version should be inserted and labelled as "Table D: Revised group of educational components in the student's degree that will be replaced at sending institution". Additional rows and columns can be added as needed to tables C and D. All parties must confirm that the proposed amendments to the Learning Agreement are approved. For this specific section, original or scanned signatures are not mandatory and an approval by email may be enough. The procedure has to be decided by the sending institution, depending on the national legislation.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!