Provisioning IPC Sample Clauses

Provisioning IPC. Boeing will, on or about July 1, 1997, furnish to Buyer a Boeing Illustrated Parts Catalog (IPC), (Provisioning IPC). The Provisioning IPC will be as complete as possible and will cover Provisioning Items selected by Boeing for review by Customer for initial provisioning for the Aircraft. Boeing will, from time to time, until a date approximately 90 days following delivery of the last Aircraft, or until the delivery configuration of each of the Aircraft is reflected in the Provisioning IPC, whichever is later, furnish to Customer revisions to the Provisioning IPC.
AutoNDA by SimpleDocs
Provisioning IPC. Boeing will, on or about January 15, 1997 for the 737-524 Aircraft, March 1, 1997 for the 737- 724/824 Aircraft and January 1, 1998 for the 737-624 Aircraft, furnish to Buyer a Boeing Illustrated Parts Catalog (IPC), hereinafter referred to as the "Provisioning IPC." The Provisioning IPC will be as complete as possible and will cover Provisioning Items selected by Boeing for review by Buyer for initial provisioning for the Aircraft. Boeing will, from time to time, until a date approximately 90 days following delivery of the last Aircraft, or until the delivery configuration of each of the Aircraft is reflected in the Provisioning IPC, whichever is later, furnish to Buyer revisions to the Provisioning IPC.
Provisioning IPC. Boeing will, on or about ninety (90) days after Aircraft implementation which is approximately 12 months before delivery, furnish to Customer a Boeing Illustrated Parts Catalog (IPC), hereinafter referred to as the "Provisioning IPC". The Provisioning IPC will be as complete as possible and will cover Provisioning Items selected by Boeing for review by Customer for initial provisioning for the Aircraft. Boeing will, from time to time, until a date approximately 90 days following delivery of the last Aircraft, or until the delivery configuration of each of the Aircraft is reflected in the Provisioning IPC, whichever is later, furnish to Customer revisions to the Provisioning IPC.
Provisioning IPC. Seller will as soon as is reasonably practical furnish to Buyer a Seller Illustrated Parts Catalog (IPC), hereinafter referred to as the "Provisioning IPC." The Provisioning IPC will be as complete as possible and will cover Provisioning Items selected by Seller for review by Buyer for initial provisioning for the Aircraft. Seller will, from time to time, until a date approximately 90 days following delivery of the last Aircraft, or until the delivery configuration of each of the Aircraft is reflected in the Provisioning IPC, whichever is later, furnish to Buyer revisions to the Provisioning IPC.

Related to Provisioning IPC

  • Provisioning 2.4.1 BellSouth shall provision services during its regular working hours. To the extent OneTone requests provisioning of service to be performed outside BellSouth’s regular working hours, or the work so requested requires BellSouth’s technicians or project managers to work outside of regular working hours, overtime charges set forth in BellSouth’s intrastate Access Services Tariff, Section E13.2, shall apply. Notwithstanding the foregoing, if such work is performed outside of regular working hours by a BellSouth technician or project manager during his or her scheduled shift and BellSouth does not incur any overtime charges in performing the work on behalf of OneTone, BellSouth will not assess OneTone additional charges beyond the rates and charges specified in this Agreement. 2.4.2 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by OneTone (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will xxxx OneTone for each additional dispatch required to provision the circuit due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s XXX Xx. 0 Xxxxxx, Xxxxxxx 13.3.1.

  • Scope of Works (a) Users with an appropriate licence type may be able to create and access Scope of Works. (b) The parties acknowledge and agree that: (i) any wording contained in a Scope of Works is established by the Customer, is customisable and within the Customer's absolute control; (ii) Users make decisions within ProcurePro on how to draft Scope of Works and ProcurePro is not responsible for those decisions; (iii) the Supplier is not liable for the Customer's use or reliance upon any Scope of Works; and (iv) the Supplier is not responsible for controlling the use, copying, modification or export of a Scope of Works by any User to which the Customer allows access to that Scope of Works.

  • Scope of Work For the 2022/2023 Grant Period, the Provider will maintain a victim services program that will be available to provide direct services to victims of crime who are identified by the Provider or are presented to the Provider, as specified in the Provider’s 2022/2023 Grant Application as approved by the OAG and incorporated herein by reference.

  • Ordering and Provisioning 53.3.1 CenturyLink will provide necessary ordering and provisioning business process support as well as those technical and systems interfaces as may be required to enable CLEC to provide resale services, including the functions, features, and capabilities of such services, and Unbundled Network Elements. If CenturyLink deploys any enhanced electronic capability CenturyLink will notify CLEC of availability and CLEC shall use the processes for performing transaction(s) to the extent practicable and the use of any other interface or process will be discontinued. 53.3.2 The Parties agree that orders for services under this Agreement will not be submitted or accepted until thirty (30) Days after the completion of all account establishment activities, including but not limited to, the documents and information subscribed in Section 45.1, unless the Parties mutually agree upon a different date based on the specific circumstances of the Parties’ relationship. 53.3.3 Except as specifically provided otherwise in this Agreement, pre- ordering, ordering and provisioning of resold services shall be governed in accordance with CenturyLink’s Standard Practices. 53.3.4 CenturyLink will provide provisioning intervals and procedures for design and complex services on a nondiscriminatory basis. Complex Service Order charges pursuant to Tariff terms may apply. 53.3.5 Where Technically Feasible, the NEAC will coordinate support for all designed and/or complex services provided to CLEC. 53.3.6 To the extent required by Applicable Law, and upon request from CLEC, employing CenturyLink’s LSR, CenturyLink will provide blocking of 700, 900, and 976 services, or other services of similar type as may now exist or be developed in the future, and shall provide Billed Number Screening (BNS), including required LIDB updates, or equivalent service for blocking completion of bill-to-third party and collect calls, on a line, PBX, or individual service basis. Blocking shall be provided to the extent (a) it is an available option for the Telecommunications Service resold by CLEC, or (b) it is Technically Feasible when requested by CLEC as a function of Unbundled Network Elements. 53.3.7 When ordering a resale service via an LSR Service Order, CLEC may order separate interLATA and IintraLATA service providers (i.e., two PICs) on a line or trunk basis, and CLEC agrees to pay the applicable Service Order and PIC charges associated with such order. CenturyLink will accept PIC change orders for IntraLATA toll and long distance services through the service provisioning process. 53.3.8 The standard Service Order charges as listed in the Table 1 of this Agreement shall apply to all orders.

  • Deployment (a) In filling a position vacancy at a location NAV CANADA may proceed by the transfer of an employee at the same level. (b) For the purposes of this Article, a “transfer” shall be considered to be a lateral change in position. (c) Transfer requiring relocation under the NCJC Travel Program shall be subject to the employee’s written consent.

  • General Scope of Work The Scope of Work and projected level of effort required for these SERVICES is described in Exhibit “A” attached hereto and by this reference made a part of this AGREEMENT. The General Scope of Work was developed utilizing performance based contracting methodologies.

  • Programming Phase Schematic Design Phase: 2.2.1.3. Design Development Phase:

  • Technical Specifications The Technical Specifications furnished on the CD are intended to establish the standards for quality, performance and technical requirements for all labor, workmanship, material, methods and equipment necessary to complete the Work. When specifications and drawings are provided or referenced by the County, these are to be considered part of the Scope of Work, and to be specifically documented in the Detailed Scope of Work. For convenience, the County supplied specifications, if any, and the Technical Specifications furnished on the CD.

  • Interoperability To the extent required by applicable law, Cisco shall provide You with the interface information needed to achieve interoperability between the Software and another independently created program. Cisco will provide this interface information at Your written request after you pay Cisco’s licensing fees (if any). You will keep this information in strict confidence and strictly follow any applicable terms and conditions upon which Cisco makes such information available.

  • Software Development Software designs, prototypes, and all documentation for the final designs developed under this agreement must be made fully transferable upon direction of NSF. NSF may make the software design, prototype, and documentation for the final design available to competitors for review during any anticipated re-competition of the project.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!