Common use of Recycling Services Clause in Contracts

Recycling Services. The following shall apply to fiber and non-fiber recyclables (“Recyclable Materials”) and recycling services All Recyclable Materials must be clean, dry, unshredded, empty, loose and unbagged (i) Single stream Recyclable Materials (“Single Stream”) will consist of Customer’s entire volume of uncoated office and writing paper, magazines, pamphlets, mail, newspaper; flattened, uncoated cardboard, paperboard boxes; aluminum food and beverage containers, tin or steel cans; glass, and rigid container plastics #1, #2 and #5, including narrow neck containers and tubs Any material not specifically set forth above, including but not limited to foam, film plastics, plastic bags, napkins, tissue, paper towels, or paper that has been in contact with food, is unacceptable Glass may not be accepted at all locations Customer shall provide source-separated wastepaper, cardboard, plastics and metals in accordance with the most current ISRI Scrap Specifications Circular and any amendments thereto or replacements thereof All other Recyclable Materials will be delivered in accordance with industry standards or such specifications communicated to Customer by Company from time-to-time Company reserves the right, upon notice to Customer, to discontinue acceptance of any category of Recyclable Materials set forth above as a result of market conditions related to such materials and makes no representations as to the recyclability of the materials (ii) Notwithstanding anything to the contrary contained herein, Recyclable Materials may not contain Special Waste, Excluded Materials or other materials that are deleterious or capable of causing material damage to any part of Company’s property, its personnel or the public or materially impair the strength or the durability of Company’s structures or equipment

Recycling Services. The following shall apply to fiber and non-fiber recyclables (“Recyclable Materials”) and recycling services services. All Recyclable Materials must be clean, dry, unshredded, empty, loose and unbagged unbagged. (i) Single stream Recyclable Materials (“Single Stream”) will consist of Customer’s entire volume of uncoated office and writing paper, magazines, pamphlets, mail, newspaper; flattened, uncoated cardboard, paperboard boxes; aluminum food and beverage containers, tin or steel cans; glass, and rigid container plastics #1, #2 and #5, including narrow neck containers and tubs tubs. Any material not specifically set forth above, including but not limited to foam, film plastics, plastic bags, napkins, tissue, paper towels, or paper that has been in contact with food, is unacceptable unacceptable. Glass may not be accepted at all locations locations. Customer shall provide source-separated wastepaper, cardboard, plastics and metals in accordance with the most current ISRI Scrap Specifications Circular and any amendments thereto or replacements thereof thereof. All other Recyclable Materials will be delivered in accordance with industry standards or such specifications communicated to Customer by Company from time-to-time time. Company reserves the right, upon notice to Customer, to discontinue acceptance of any category of Recyclable Materials set forth above as a result of market conditions related to such materials and makes no representations as to the recyclability of the materials materials. (ii) Notwithstanding anything to the contrary contained herein, Recyclable Materials may not contain Special Waste, Excluded Materials or other materials that are deleterious or capable of causing material damage to any part of Company’s property, its personnel or the public or materially impair the strength or the durability of Company’s structures or equipment. (iii) Company may reject in whole or in part, or may process, in its sole discretion, Recyclable Materials not meeting the specifications. Customer shall pay Company for all increased costs, losses and expenses incurred with respect to such non-conforming Recyclable Materials which charges may include an amount for Company’s operating or profit margin (collectively the “Cost”). Without limiting the foregoing, Customer shall pay a contamination charge for additional handling, processing, transporting and/or disposing of such non-conforming Recyclable Materials, Special Waste, Excluded Materials, and/or all of part of non-conforming loads and additional charges may be assessed for bulky items such as appliances, concrete, furniture, mattresses, tires, electronics, pallets, yard waste, propane tanks, etc. Collected Recyclable Materials for which no commercially reasonable market exists may be landfilled at Customer’s Cost. (iv) Recycling Services are subject to a Recyclable Material Offset (RMO) charge to the extent that (a) Company’s processing cost per ton, including costs of disposal for contamination, plus profit margin, exceeds (b) an amount equal to recyclables value per ton minus an amount for profit margin. The RMO charge, including profit margin, processing and disposal costs and recyclable value shall be determined by Company from time-to-time, in its sole discretion, based on applicable operating data and market information. If recyclables value exceeds processing costs, plus profit margin, a RMO credit may apply, at Company’s sole discretion. (v) Where Company has agreed in writing to provide a market-based rebate to Customer, the following shall apply. Customer acknowledges that the market value for Recyclable Materials will fluctuate based upon various factors, and such materials may at times have no value or that the value may be negative. Company will establish the value of Recyclable Materials each month based upon such various factors, including but not limited to quantity, quality and location. For recycling services, Company shall pay or charge Customer on or about the last day of each month for Recyclable Materials accepted during the preceding month, after deduction of any charges owed to Company by Customer. Any invoice shall be payable upon receipt. Where recycling services are provided, charges may include separate fuel and environmental surcharges as set forth at xxx.xx.xxx. (vi) Notwithstanding anything to the contrary set forth above, the liquidated damages calculation set forth in Section 7 of this Agreement shall not apply to any Customer breach of the Agreement pertaining to Services for Recyclable Materials which have been determined by Company to have a positive value. If a breach occurs under such circumstances, the damages shall be determined by calculating actual damages rather than such liquidated damages. (vii) Service arrangements will be agreed upon between Customer and Company for the service location(s) set forth in this Agreement. For trailer load quantities, Customer shall load trailers to full visible capacity to achieve 40,000 pounds minimum shipping weight and trailers shall be loaded or caused to be loaded in accordance with the most current ISRI/AF&PA Shipping Guide. Freight and/or adjustments may apply to light loads. For baled wastepaper picked up by bale route service, the minimum quantity for pickup is six (6) xxxxx and for purposes of payment, weights shall be estimated weights.

Recycling Services. The following shall apply to fiber and non-fiber recyclables (“Recyclable Materials”) and recycling services services. All Recyclable Materials must be clean, dry, unshredded, empty, loose and unbagged unbagged. (i) Single stream Recyclable Materials (“Single Stream”) will consist of Customer’s entire volume of uncoated office and writing paper, magazines, pamphlets, mail, newspaper; flattened, uncoated cardboard, paperboard boxes; aluminum food and beverage containers, tin or steel cans; glass, and rigid container plastics #1, #2 and #5, including narrow neck containers and tubs tubs. Any material not specifically set forth above, including but not limited to foam, film plastics, plastic bags, napkins, tissue, paper towels, or paper that has been in contact with food, is unacceptable unacceptable. Glass may not be accepted at all locations locations. Customer shall provide source-separated wastepaper, cardboard, plastics and metals in accordance with the most current ISRI Scrap Specifications Circular and any amendments thereto or replacements thereof thereof. All other Recyclable Materials will be delivered in accordance with industry standards or such specifications communicated to Customer by Company from time-to-time time. Company reserves the right, upon notice to Customer, to discontinue acceptance of any category of Recyclable Materials set forth above as a result of market conditions related to such materials and makes no representations as to the recyclability of the materials materials. (ii) Notwithstanding anything to the contrary contained herein, Recyclable Materials may not contain Special Waste, Excluded Materials or other materials that are deleterious or capable of causing material damage to any part of Company’s property, its personnel or the public or materially impair the strength or the durability of Company’s structures or equipment.

Recycling Services. The following shall apply to fiber and non-fiber recyclables (“Recyclable Materials”) and recycling services Services: All Recyclable Materials must be clean, dry, unshredded, empty, loose and unbagged (i) unbagged. Single stream Recyclable Materials (“Single Stream”) will consist of Customer’s entire volume of uncoated office and writing paper, magazines, pamphlets, mail, newspaper; flattened, uncoated cardboard, paperboard boxes; aluminum food and beverage containers, tin or steel cans; glass, and rigid container plastics #1, #2 and #5, including narrow neck containers and tubs tubs. Any material not specifically set forth above, including but not limited to foam, film plastics, plastic bags, napkins, tissue, paper towels, or paper that has been in contact with food, is unacceptable unacceptable. Glass may not be accepted at all locations locations. Customer shall provide source-separated wastepaper, cardboard, plastics and metals in accordance with the most current ISRI Scrap Specifications Circular and any amendments thereto or replacements thereof thereof. All other Recyclable Materials will be delivered in accordance with industry standards or such specifications communicated to Customer by Company WMNS from time-to-time Company time. WMNS reserves the right, upon notice to Customer, to discontinue acceptance of any category of Recyclable Materials set forth above as a result of market conditions related to such materials and makes no representations as to the recyclability of the materials (ii) materials. Collected Recyclable Materials for which no commercially reasonable market exists may be landfilled at Customer’s Cost. Notwithstanding anything to the contrary contained herein, Recyclable Materials may not contain Special Nonconforming Waste, Excluded Materials Hazardous Waste, Special Waste or other materials that are deleterious or capable of causing material damage to any part of Company’s WMNS' property, its personnel or the public or materially impair the strength or the durability of Company’s WMNS' structures or equipment. WMNS may reject in whole or in part, or may process, in its sole discretion, Recyclable Materials not meeting the specifications. Customer shall pay WMNS for all increased costs, losses and expenses incurred with respect to such non-conforming Recyclable Materials which charges may include an amount for WMNS’ operating or profit margin (collectively the “Cost”). Without limiting the foregoing, and Customer shall pay a contamination charge for additional handling, processing, transporting and/or disposing of such non-conforming Recyclable Materials, Hazardous Waste, Special Waste, Nonconforming Waste, and/or all of part of non-conforming loads and additional charges may be assessed for bulky items such as appliances, concrete, furniture, mattresses, tires, electronics, pallets, yard waste, propane tanks, etc. Recycling Services are subject to a Recyclable Material Offset (RMO) charge to the extent that (a) WMNS’ processing cost per ton, including costs of disposal for contamination and profit margin, exceeds (b) an amount equal to recyclables value per ton minus an amount for profit margin. The RMO charge, including profit margin, processing and disposal costs and recyclable value shall be determined by WMNS from time-to-time, in its sole discretion, based on applicable operating data and market information. If recyclables value exceeds processing costs, plus profit margin, a RMO credit may apply, at WMNS’ sole discretion.