REQUIREMENTS FOR ATTACHMENT Sample Clauses

REQUIREMENTS FOR ATTACHMENT. A. Qualified Electrical Workers. The Licensee must employ or hire certified electricians as defined in WAC 000-00-000. B. Access / Climbing Space. The Licensee's Attachments shall not impede access to climbing space or in any way disturb or conflict with Tacoma Power's equipment or any other entity's equipment. C. Costs / Make-Ready Work. The Licensee is responsible for, and shall pay, all costs associated with its Attachments on Tacoma Power Poles including, but not limited to, Tacoma Power Make-Ready Work and maintenance of such Attachments. Section V Make-Ready Work, discusses requirements associated with Tacoma Power and Third Party Make-Ready Work that must be performed to accommodate the Licensee's Attachments relative to Tacoma Power Poles and equipment. The Licensee shall pay and/or reimburse Tacoma Power for Tacoma Power Make-Ready Work performed, and for costs incurred, by Tacoma Power pursuant to this Section VII. D. Abandonment, Relocation, Replacement, Rebuild, or Removal of Pole. 1. If at any time Tacoma Power desires or is required to abandon, relocate, replace, rebuild or remove any of its Poles on which Licensee Attachments are located, Tacoma Power shall provide Licensee thirty (30) day written notice prior to the date it intends to abandon, relocate, replace, rebuild or remove said Pole or Poles. The Licensee shall change the location of its Attachments as necessitated by Tacoma Power's abandonment, relocation, replacement, rebuild or removal of a Pole. All such Attachment changes shall be made at Licensee’s sole cost and expense. If the Licensee fails to make or complete any changes required hereunder within thirty (30) days of notification, Tacoma Power, at its discretion, may perform such changes, at Licensee’s sole risk, and invoice Licensee for reimbursement of all costs incurred. 2. For Poles located in unincorporated Xxxxxx County, pursuant to Xxxxxx County policy, utilities may receive a “Utility in Good Standing” designation if they maintain compliance with Xxxxxx County policies and regulations relative to utility facilities in Xxxxxx County right of ways. A utility that receives the “Utility in Good Standing” designation is not required to obtain permits for a certain defined class of work. This designation, therefore, provides a “Utility in Good Standing” with significant benefits in terms of avoided permit fees and avoided costs associated with time spent obtaining permits. Licensee’s failure to remove Attachments as directe...
AutoNDA by SimpleDocs
REQUIREMENTS FOR ATTACHMENT. A security agreement attaches, i.e., it becomes enforceable against the debtor and third parties, if (and only if) (i) the secured party gives value, (ii) the debtor has rights in the material, and (iii) one of the conditions of 9-203(b)(3) is met. Section 9-203(b).

Related to REQUIREMENTS FOR ATTACHMENT

  • Certain State Law Requirements for Contracts The contents of this Section are required by Texas Law and are included by County regardless of content. For purposes of Sections 2252.152, 2271.002, and 2274.002, Texas Government Code, as amended, C&T hereby verifies that C&T and any parent company, wholly owned subsidiary, majority-owned subsidiary, and affiliate: a. Unless affirmatively declared by the United States government to be excluded from its federal sanctions regime relating to Sudan or Iran or any federal sanctions regime relating to a foreign terrorist organization, is not identified on a list prepared and maintained by the Texas Comptroller of Public Accounts under Sections 806.051, 807.051, or 2252.153 of the Texas Government Code. b. If employing ten (10) or more full-time employees and this Agreement has a value of

  • CONTRACTUAL PROVISIONS ATTACHMENT Important: This form contains mandatory contract provisions and must be attached to or incorporated in all copies of any contractual agreement. If it is attached to the vendor/contractor's standard contract form, then that form must be altered to contain the following provision: "The Provisions found in Contractual Provisions Attachment (Form DA-146a, Rev. 06-12), which is attached hereto, are hereby incorporated in this contract and made a part thereof." The parties agree that the following provisions are hereby incorporated into the contract to which it is attached and made a part thereof, said contract being the day of , 20 .

  • Requirements for Protection In compliance with NPCC requirements and Good Utility Practice, Developer shall provide, install, own, and maintain relays, circuit breakers and all other devices necessary to remove any fault contribution of the Large Generating Facility to any short circuit occurring on the New York State Transmission System not otherwise isolated by Connecting Transmission Owner’s equipment, such that the removal of the fault contribution shall be coordinated with the protective requirements of the New York State Transmission System. Such protective equipment shall include, without limitation, a disconnecting device or switch with load- interrupting capability located between the Large Generating Facility and the New York State Transmission System at a site selected upon mutual agreement (not to be unreasonably withheld, conditioned or delayed) of the Developer and Connecting Transmission Owner. Developer shall be responsible for protection of the Large Generating Facility and Developer’s other equipment from such conditions as negative sequence currents, over- or under-frequency, sudden load rejection, over- or under-voltage, and generator loss-of-field. Developer shall be solely responsible to disconnect the Large Generating Facility and Developer’s other equipment if conditions on the New York State Transmission System could adversely affect the Large Generating Facility.

  • of Attachment Z The Interconnection Customer shall be responsible for all System Upgrade Facility costs as required by Section 32.3.5.3.2 of Attachment Z or its share of any System Upgrade Facilities and System Deliverability Upgrades costs resulting from the final Attachment S process, as applicable, and Attachment 6 to this Agreement shall be revised accordingly.

  • Requirements for Transfer (a) This Warrant and the Warrant Shares shall not be sold or transferred unless either (i) they first shall have been registered under the Securities Act of 1933, as amended (the "Act"), or (ii) the Company first shall have been furnished with an opinion of legal counsel, reasonably satisfactory to the Company, to the effect that such sale or transfer is exempt from the registration requirements of the Act. (b) Notwithstanding the foregoing, no registration or opinion of counsel shall be required for (i) a transfer by a Registered Holder which is a corporation to a wholly owned subsidiary, parent or affiliate of such corporation, a transfer by a Registered Holder which is a partnership to a partner of such partnership or a retired partner of such partnership or to the estate of any such partner or retired partner, or a transfer by a Registered Holder which is a limited liability company to a member of such limited liability company or a retired member or to the estate of any such member or retired member, provided that the transferee in each case agrees in writing to be subject to the terms of this Section 4, or (ii) a transfer made in accordance with Rule 144 under the Act. (c) Each certificate representing Warrant Shares shall bear a legend substantially in the following form: "The securities represented by this certificate have not been registered under the Securities Act of 1933, as amended, and may not be offered, sold or otherwise transferred, pledged or hypothecated unless and until such securities are registered under such Act or an opinion of counsel satisfactory to the Company is obtained to the effect that such registration is not required." The foregoing legend shall be removed from the certificates representing any Warrant Shares, at the request of the holder thereof, at such time as they become eligible for resale pursuant to Rule 144(k) under the Act.

  • Minimum Site Requirements for TIPS Sales (when applicable to TIPS Sale). Cleanup: When performing work on site at a TIPS Member’s property, Vendor shall clean up and remove all debris and rubbish resulting from their work as required or directed by the TIPS Member or as agreed by the parties. Upon completion of work, the premises shall be left in good repair and an orderly, neat, clean and unobstructed condition. Preparation: Vendor shall not begin a project for which a TIPS Member has not prepared the site, unless Vendor does the preparation work at no cost, or until TIPS Member includes the cost of site preparation in the TIPS Sale Site preparation includes, but is not limited to: moving furniture, installing wiring for networks or power, and similar pre‐installation requirements. Registered Sex Offender Restrictions: For work to be performed at schools, Vendor agrees that no employee of Vendor or a subcontractor who has been adjudicated to be a registered sex offender will perform work at any time when students are, or reasonably expected to be, present unless otherwise agreed by the TIPS Member. Vendor agrees that a violation of this condition shall be considered a material breach and may result in the cancellation of the TIPS Sale at the TIPS Member’s discretion. Vendor must identify any additional costs associated with compliance of this term. If no costs are specified, compliance with this term will be provided at no additional charge. Safety Measures: Vendor shall take all reasonable precautions for the safety of employees on the worksite, and shall erect and properly maintain all necessary safeguards for protection of workers and the public. Vendor shall post warning signs against all hazards created by the operation and work in progress. Proper precautions shall be taken pursuant to state law and standard practices to protect workers, general public and existing structures from injury or damage. Smoking: Persons working under Agreement shall adhere to the TIPS Member’s or local smoking statutes, codes, ordinances, and policies.

  • SERVICE REQUIREMENTS FOR REFERRED CLIENTS A. Agent agrees to respond to any communications from a Referred Client within two (2) hours after receipt if such communication is received between 9:00am to 5:00pm local time. For communications received outside of these hours, Agent agrees to respond by 10:00am the next day. B. Agent agrees to update XXXX.xxx with status updates within 48 hours after initial communication with a Referred Client and upon every significant status change until closing or abandoned. Updates shall be made by Agent via email to xxxxxxxxxxxx@xxxx.xxx. C. Vacations or extended absences shall be reported, with length of pause, to XXXX.xxx via email to D. Agent will not add Referred Client to any email list or calling list without the express permission of Referred Client. E. Agent agrees XXXX.xxx has the right to survey the Referred Client at any time. F. If Agent is contacted by a Referred Client that Agent is unwilling or unable to assist, Agent shall direct such Referred Client back to XXXX.xxx for assistance and notify XXXX.xxx at xxxxxxxxxxxx@xxxx.xxx. G. Agent agrees that XXXX.xxx has no obligation to provide Agent with any number of referrals and that prospective clients are free to select the agent they wish to work with for any particular real estate transaction.

  • Minimum Shipping Requirements for TIPS Sales Vendor shall ship, deliver, or provide ordered goods and services within a commercially reasonable time after acceptance of the order. If a delay in delivery is anticipated, Vendor shall notify the TIPS Member as to why delivery is delayed and provide an updated estimated time for completion. The TIPS Member may cancel the order if the delay is not commercially acceptable or not consistent with the Supplemental Agreement applicable to the order.

  • Minimum Customer Support Requirements for TIPS Sales Vendor shall provide timely and commercially reasonable support for TIPS Sales or as agreed to in the applicable Supplemental Agreement.

  • Attachment C, Standard State Provisions for Contracts and Grants Attachment C is hereby deleted in its entirety and replaced by the Attachment C December 15, 2017 attached to this Amendment. Child Support (Applicable to natural persons only; not applicable to corporations, partnerships or LLCs). Contractor is under no obligation to pay child support or is in good standing with respect to or in full compliance with a plan to pay any and all child support payable under a support order as of the date of this amendment.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!