Licensee Responsibilities Licensee is responsible for Licensee’s Users’ compliance with this Agreement. Licensee is responsible for all of Licensee’s uses and accounts. Licensee will be responsible for maintaining the security of Licensee’s accounts, passwords and files. Licensee and Users cannot share Licensee’s accounts or passwords or allow any third party to use Licensee’s accounts or passwords. Licensee will exercise reasonable precautions to prevent unauthorized use of the Software.
Development Activities The Development activities referred to in item “b” of paragraph 3.1 include: studies and projects of implementation of the Production facilities; drilling and completion of the Producing and injection xxxxx; and installation of equipment and vessels for extraction, collection, Treatment, storage, and transfer of Oil and Gas. The installation referred to in item “c” includes, but is not limited to, offshore platforms, pipelines, Oil and Gas Treatment plants, equipment and facilities for measurement of the inspected Production, wellhead equipment, production pipes, flow lines, tanks, and other facilities exclusively intended for extraction, as well as oil and gas pipelines for Production Outflow and their respective compressor and pumping stations.
Responsibilities of Both Parties 6.1 The CLEC providing the circuit between CLEC’s office and SBC-12STATE’s office shall make such circuits available for use in connection with the DA services covered herein. When the total traffic exceeds the capability of the existing circuits, additional circuits will be provided by the CLEC.
6.2 Where applicable, if additional ADAX cards and ASN Routers (with sync and token ring cards) are necessary, they will be provided by SBC-12STATE, and CLEC will reimburse SBC-12STATE for the cost, plus Engineering, Furnish and Installation.
Development Responsibilities From and after the Effective Date, BMS shall assume sole responsibility for the Development of Compounds and Products in the Field in the Territory during the Term at its own cost and expense (including responsibility for all funding, resourcing and decision-making, subject to Sections 3.3 and 3.4), except with respect to the performance by Ambrx of the Research Program activities assigned to Ambrx pursuant to the Research Plan and as otherwise may be agreed upon by the Parties in writing. BMS, by itself or through its Affiliates and Sublicensees, shall use Diligent Efforts to Develop a Compound or Product in the Field in accordance with the Development Plan for the purpose of obtaining a Regulatory Approval in each Major Market. For clarity, it is understood and acknowledged that Diligent Efforts in the Development of Compounds and Products may include sequential implementation of Clinical Trials and/or intervals between Clinical Trials for data interpretation and clinical program planning and approval.
Responsibilities of Business Associate Business Associate agrees:
Responsibilities of Client a. Client shall exclusively retain the services of Consultant to perform the Scope of Work, in accordance with, and subject to, the other provisions of this Agreement.
b. Client shall provide access for Consultant and its subcontractors to the Site, and shall enter into access agreements with other third party property owners, as necessary for Consultant to complete the performance of the Scope of Work.
c. Client shall, as necessary to complete the Scope of Work: (i) cooperate and assist Consultant with the preparation and submittal, to PADEP, PAUSTIF, local governing authorities and others, of all information and documents including, without limitation, correspondence, notices, reports, data submittals, restrictive covenants, engineering and institutional controls, and the like; and (ii) implement and maintain any engineering or institutional controls.
d. Client shall transmit to Consultant copies of all documentation, correspondence, reports, and the like, sent or received by Client, regarding the Scope of Work at the Site.
e. Client shall make a good faith effort to minimize any and all interference with the progress of the Scope of Work if the Site is remodeled or otherwise modified. Client shall also make a good faith effort to place this condition on third parties that are not a party to this Agreement including, but not limited to, current owners, future owners, current operators, future operators, current lessees and future lessees.
RESPONSIBILITIES OF THE UNIVERSITY The UNIVERSITY shall designate in writing a faculty member to coordinate with a designee of the FIELDWORK SITE.
Responsibilities of Customer 5.1 To the extent that the Supplier requires access to the Customer Site to perform the Services, the Customer shall provide such access during Normal Business Hours and to provide a suitable work environment to enable the Supplier to perform such Services subject to the Supplier complying with such internal policies and procedures of the Customer (including those relating to security and health and safety) as may be notified to the Supplier in writing from time to time.
5.2 The Customer shall co-operate with the Supplier in all matters relating to the Services and shall appoint a Representative (“Customer Representative”), who shall have authority to commit the Customer on all matters relating to the relevant Service.
5.3 The Customer agrees and acknowledges the terms of the applicable Licence Agreements, Customer Agreement and that such terms shall form part of this Agreement. For the avoidance of doubt, in the event the applicable Licence Agreements and/or Customer Agreement is not applicable to the Services being received or delivered by the Supplier to the Customer under this Agreement, such agreements shall not apply.
5.4 Customer shall;
(a) adhere to the Acceptable Use Policy;
(b) be a bona fide licenced user of all Third-Party Software used in the provision of the Services;
(c) co-operate with the Supplier in all matters relating to the Services as reasonably requested by the Supplier;
(d) adhere to the dates scheduled for provision of Services by the Supplier to the Customer as stated in the applicable Statement of Work or otherwise agreed between the Parties in writing. In the event the Customer wishes to reschedule or cancel the dates for the provision of Services, liquidated damages (“Liquidated Damages”) will become payable from the Customer to Supplier on the following basis:
(i) If dates are changed or cancelled at the Customer’s request more than 14 days before the scheduled start date no Liquidated Damages are payable.
(ii) If dates are changed or cancelled between 7 days and 14 days before the scheduled start date Liquidated Damages equivalent to 50% of the Fees for the Services to be provided at that time will be payable.
(iii) If dates are changed or cancelled less than 7 days before the scheduled start date Liquidated Damages equivalent to 100% of the Fees for the Services to be provided at that time will be payable.
(e) inform the Supplier of all health and safety rules and regulations and any other reasonable security requirements that apply at any of the Customer’s premises;
(f) in respect of any Microsoft funded services, sign and deliver the Microsoft Proof of Execution (XXX) within 7 days of the date of issue by Microsoft. In the event that the Customer does not return the XXX within the 7 days’ notice period, the Supplier may be entitled to charge the Customer the amounts directly and the Customer shall follow the payment terms in this Agreement.;
(g) maintain continuous global admin access to the Customer’s relevant Microsoft
(h) Where a Microsoft Cloud service is deployed / utilised within the project the Customer shall assign the Supplier to be the Digital Partner of Record for a minimum of twelve (12) months from project completion date;
(i) provide appropriate hardware interface, software and access authorisation to enable remote diagnosis, should such capability be required;
(j) provide all information and make available all resources as reasonably requested by Supplier in the execution of its obligations under this Agreement;
(k) use all reasonable efforts to follow the reasonable instructions of Supplier support personnel with respect to the resolution of defects;
(l) gather all relevant information prior to requesting assistance in respect of any defects including detailed defect description, and procedures required to replicate a problem if possible. Any additional information which may help in the diagnosis of a defect should be included such as network configuration details;
(m) agree that if, in the course of performing the Services, it is reasonably necessary for the Supplier’s performance of its obligations under a Statement of Work for Supplier to access or use any equipment, software or data of the Customer (or which is in the possession of the Customer) then it shall where it is able to do so grant to Supplier a non-exclusive, royalty free, terminable licence to use the same solely for the purpose of delivering the Services only for as long as is strictly necessary to deliver such Services; and
(n) provide network and user access between Customer’s and Supplier’s data centres.
5.5 To the extent that the Supplier requires access to the Customer’s Operating Environment to perform the Dedicated Support, the Customer shall use reasonable endeavours to provide such access during Normal Business Hours and to provide a suitable work environment to enable the Supplier to perform such Dedicated Support subject to the Supplier complying with such internal policies and procedures of the Customer (including those relating to security and health and safety) as may be notified to the Supplier in writing from time to time.
5.6 The Customer shall (unless otherwise specified in the Statement of Work or as otherwise set out in this Agreement):
(a) use the Services only for lawful purposes and in accordance with this Agreement;
(b) keep secure from third parties any passwords issued to the Customer by the Supplier;
(c) install or, permit the Supplier to install, the current version of software required to provide the Dedicated Support from time to time when upgrades or fixes occur and to provide a reasonable level of assistance in implementation and testing;
(d) provide notice of intention to change applicable Customer-side Equipment or Customer Operating Environment or data-feeds that will directly impact the Dedicated Support;
(e) comply with all applicable laws and regulations with respect to its activities under this Agreement, including those set out in Clause 20;
(f) carry out all other Customer responsibilities set out in this Agreement and the Statement of Work in a timely and efficient manner. In the event of any delays in the Customer's provision of such assistance as agreed by the Parties, the Supplier may adjust any timetable or delivery schedule set out in this Agreement as reasonably necessary;
(g) use the Third-Party Software and/or Software correctly in accordance with its operating instructions;
(h) notify Supplier promptly of any problems with the Third-Party Software and/or Software; and
(i) use only versions of the Third-Party Software and/or Software covered by Microsoft in mainstream or extended support unless otherwise agreed in writing.
5.7 In the event that the Customer is in breach of its obligations under the Agreement (excluding payment obligations) then the Supplier shall provide written notice of such breach, specifying in detail the nature of the breach and providing thirty (30) Business Days’ notice to remedy such breach if capable of remedy. If the Customer fails to remedy such breach the Supplier shall be entitled to terminate or suspend the Services without prejudice to any pre-existing rights and obligations of either Party. The Supplier shall have no liability or responsibility should the Services fail to comply with the Statement of Work and/or Service Level Agreements as a direct result of the Customer (including without limitation any of its employees, subcontractors or any of its staff) being in breach of the Agreement.
5.8 In the event that the Customer is in breach of its payment obligations under the Agreement then the Supplier shall provide written notice of such breach, specifying in detail the nature of the breach and providing thirty (30) days notice to remedy such breach if capable of remedy. If the Customer fails to remedy such breach the Supplier shall be entitled to terminate or suspend the Services without prejudice to any pre- existing rights and obligations of either Party. The Supplier shall have no liability or responsibility should the Services fail to comply with the Statement of Work and/or Service Level Agreements as a direct result of the Customer (including without limitation any of its employees, subcontractors or any of its staff) being in breach of the Agreement.
Responsibilities of Contractor A. The Contractor shall perform all work on the described project as required by the Contract documents. The work to be performed includes the labor and services necessary to produce such replacement, and all materials, supplies, tools, transportation, equipment, and machinery required for replacement.
B. This project bid includes all materials, labor and equipment to complete the reconstruction and resurfacing of streets as outlined in the Project Manual for WWREYN - XXXXXXXX SANITARY SEWER - PHASE 1 dated March 25th, 2021 as outlined in Attachment A.
Licensee’s Responsibilities Licensee will be responsible for any and all damage to or relocation of existing facilities. Further, Licensee shall reimburse the City for all costs of replacing or repairing any property of the City, or of others, that is damaged by or on behalf of Licensee as a result of activities under this Agreement.
