Rights to the Contingents for API Calls Sample Clauses

Rights to the Contingents for API Calls a) The Provider grants the Customer the right to use the contingents for API calls within the scope specified in the agreement. Unless otherwise specified in this agreement the Customer shall be granted only a simple, non- exclusive, non-transferable right to use the contingents for the full duration of their validity. The right of use is limited to the use for the Customer's own business purposes to which the Provider is entitled under data protection law within the meaning of Section 2.3. Further use must always be contractually agreed beforehand. b) The Customer is obliged not to pass the contingents - or any parts thereof - on to or make them accessible to third parties. An exception is provided for other authorized persons pursuant to Section 3.1 lit. a) and b) who have a valid App ID pursuant to Section 3.1 lit. c). c) To the extent permitted by law, the Customer shall also impose these obligations on its staff. d) In the event that, in breach of Sections 3.4 lit. a) - 3.4 lit. c), the contingents fall into the hands of third parties, whether this is because the Customer has disclosed them without authorization or has failed to secure them properly from access to third parties, the Customer shall owe an appropriate contractual penalty to be set as the Provider sees fit, whereby in the event of disputes the competent court may review whether this penalty is appropriate. The minimum amount is EUR 25,000.00 per ordered contingent. This does not affect the right to enforce damages claims, although such claims will then be offset against the penalty. e) The Provider can take appropriate technical measures to establish protection against non-conforming contractual use. The use of the services as contractually agreed may not be impaired as a result.
Sample 1Sample 2
AutoNDA by SimpleDocs

Related to Rights to the Contingents for API Calls

  • Applications for Payment 9.3.1 At least ten days before the date for each progress payment established in the State- Contractor Agreement, the Contractor shall submit to the Architect an itemized Application for Payment, notarized if required, supported by such data substantiating the Contractor's right to payment as the State or the Architect may require. The application for payment must, at a minimum, reflect retainage and the required waivers of lien and any other support documentation enumerated elsewhere in the Contract Documents. 9.3.2 Unless otherwise provided in the Contract Documents, payments will be made on account of materials or equipment not incorporated in the Work but delivered and suitably stored at the site and, if approved in advance by the State, payments may similarly be made for materials or equipment suitably stored at some other location agreed upon in writing. Payments for materials or equipment stored on or off the site shall be conditioned upon submission by the Contractor of bills of sale or such other procedures satisfactory to the State to establish the State's title to such materials or equipment or otherwise protect the State's interest, including applicable insurance and transportation to the site for those materials and equipment stored off the site. 9.3.3 The Contractor warrants that title to all Work, materials and equipment covered by an Application for Payment will pass to the State either by incorporation in the construction or upon the receipt of payment by the Contractor, whichever occurs first, free and clear of all liens, claims, security interests or encumbrances, hereinafter referred to in this Article 9 as "liens"; and that no Work, materials or equipment covered by an Application for Payment will have been acquired by the Contractor, or by any other person performing Work at the site or furnishing materials and equipment for the Project, subject to an agreement under which an interest therein or an encumbrance thereon is retained by the seller or otherwise imposed by the Contractor or such other person.

  • Denominations: Provisions for Payment The Securities shall be issuable as registered Securities and in the denominations of one thousand U.S. dollars ($1,000) or any integral multiple thereof, subject to Section 2.01(a)(13). The Securities of a particular series shall bear interest payable on the dates and at the rate specified with respect to that series. Subject to Section 2.01(a)(23), the principal of and the interest on the Securities of any series, as well as any premium thereon in case of redemption or repurchase thereof prior to maturity, and any cash amount due upon conversion or exchange thereof, shall be payable in the coin or currency of the United States of America that at the time is legal tender for public and private debt, at the office or agency of the Company maintained for that purpose. Each Security shall be dated the date of its authentication. Interest on the Securities shall be computed on the basis of a 360-day year composed of twelve 30-day months. The interest installment on any Security that is payable, and is punctually paid or duly provided for, on any Interest Payment Date for Securities of that series shall be paid to the Person in whose name said Security (or one or more Predecessor Securities) is registered at the close of business on the regular record date for such interest installment. In the event that any Security of a particular series or portion thereof is called for redemption and the redemption date is subsequent to a regular record date with respect to any Interest Payment Date and prior to such Interest Payment Date, interest on such Security will be paid upon presentation and surrender of such Security as provided in Section 3.03. Any interest on any Security that is payable, but is not punctually paid or duly provided for, on any Interest Payment Date for Securities of the same series (herein called “Defaulted Interest”) shall forthwith cease to be payable to the registered holder on the relevant regular record date by virtue of having been such holder; and such Defaulted Interest shall be paid by the Company, at its election, as provided in clause (1) or clause (2) below: (1) The Company may make payment of any Defaulted Interest on Securities to the Persons in whose names such Securities (or their respective Predecessor Securities) are registered in the Security Register at the close of business on a special record date for the payment of such Defaulted Interest, which shall be fixed in the following manner: the Company shall notify the Trustee in writing of the amount of Defaulted Interest proposed to be paid on each such Security and the date of the proposed payment, and at the same time the Company shall deposit with the Trustee an amount of money equal to the aggregate amount proposed to be paid in respect of such Defaulted Interest or shall make arrangements satisfactory to the Trustee for such deposit prior to the date of the proposed payment, such money when deposited to be held in trust for the benefit of the Persons entitled to such Defaulted Interest as in this clause provided. Thereupon the Trustee shall fix a special record date for the payment of such Defaulted Interest which shall not be more than 15 nor less than 10 days prior to the date of the proposed payment and not less than 10 days after the receipt by the Trustee of the notice of the proposed payment. The Trustee shall promptly notify the Company of such special record date and, in the name and at the expense of the Company, shall cause notice of the proposed payment of such Defaulted Interest and the special record date therefor to be sent, to each Securityholder not less than 10 days prior to such special record date. Notice of the proposed payment of such Defaulted Interest and the special record date therefor having been sent as aforesaid, such Defaulted Interest shall be paid to the Persons in whose names such Securities (or their respective Predecessor Securities) are registered in the Security Register on such special record date. (2) The Company may make payment of any Defaulted Interest on any Securities in any other lawful manner not inconsistent with the requirements of any securities exchange on which such Securities may be listed, and upon such notice as may be required by such exchange, if, after notice given by the Company to the Trustee of the proposed payment pursuant to this clause, such manner of payment shall be deemed practicable by the Trustee. Unless otherwise set forth in a Board Resolution or one or more indentures supplemental hereto establishing the terms of any series of Securities pursuant to Section 2.01 hereof, the term “regular record date” as used in this Section with respect to a series of Securities and any Interest Payment Date for such series shall mean either the fifteenth day of the month immediately preceding the month in which an Interest Payment Date established for such series pursuant to Section 2.01 hereof shall occur, if such Interest Payment Date is the first day of a month, or the first day of the month in which an Interest Payment Date established for such series pursuant to Section 2.01 hereof shall occur, if such Interest Payment Date is the fifteenth day of a month, whether or not such date is a Business Day. Subject to the foregoing provisions of this Section, each Security of a series delivered under this Indenture upon transfer of or in exchange for or in lieu of any other Security of such series shall carry the rights to interest accrued and unpaid, and to accrue, that were carried by such other Security.

  • DOMESTIC PREFERENCES FOR PROCUREMENTS To the extent applicable, Supplier certifies that during the term of this Contract will comply with applicable requirements of 2 C.F.R. § 200.322.

  • Additional Voting Powers and Voting Requirements for Certain Actions Notwithstanding any other provision of this Agreement, the Shareholders shall have power to vote to approve any amendment to Article VIII of this Agreement that would have the effect of reducing the indemnification provided thereby to Covered Persons or to Shareholders or former Shareholders, and any repeal or amendment of this sentence, and any such action shall require the affirmative vote or consent of Shareholders owning at least sixty-six and two-thirds percent (66 2/3%) of the Outstanding Shares entitled to vote thereon. In addition, the removal of one or more Trustees by the Shareholders shall require the affirmative vote or consent of Shareholders owning at least sixty-six and two-thirds percent (66 2/3%) of the Outstanding Shares entitled to vote thereon. The voting requirements set forth in this Section 6.2 shall be in addition to, and not in lieu of, any vote or consent of the Shareholders otherwise required by applicable law (including, without limitation, any separate vote by Portfolio (or Class) that may be required by the 1940 Act or by other applicable law) or by this Agreement.

  • Modifications and Updates to the Wire Center List and Subsequent Transition Periods 5.4.6.1 In the event AT&T identifies additional wire centers that meet the criteria set forth in Sections 5.4.2.1 or 5.4.2.2 above, but that were not included in the Master List of Unimpaired Wire Centers or AT&T’s List of Unimpaired Wire Centers, AT&T shall include such additional wire centers in a CNL. Each such list of additional wire centers shall be considered a Subsequent Wire Center List. AT&T will follow any limitations on the frequency with which it may issue such lists and notification procedures set forth in applicable Commission orders. 5.4.6.2 TWTC shall have thirty (30) business days to dispute the additional wire centers listed on AT&T’s CNL. Absent such dispute, effective thirty (30) business days after the date of a AT&T CNL providing a Subsequent Wire Center List, AT&T shall not be required to provide DS1 and DS3 Dedicated Transport, as applicable, in such additional wire center(s), except pursuant to the self-certification process as set forth in Section 1.9.1 of this Attachment. 5.4.6.3 For purposes of Section 5.4.6.1 above, AT&T shall make available DS1 and DS3 Dedicated Transport that were in service for TWTC in a wire center on the Subsequent Wire Center List as of the thirtieth (30th) business day after the date of AT&T’s CNL identifying the Subsequent Wire Center List (Subsequent Embedded Base) until one hundred eighty (180) days after the thirtieth (30th) business day Version: 4Q06 Standard ICA 11/30/06 from the date of AT&T’s CNL identifying the Subsequent Wire Center List (Subsequent Transition Period). 5.4.6.4 The rates set forth in Exhibit B shall apply to the Subsequent Embedded Base during the Subsequent Transition Period. 5.4.6.5 No later than one hundred eighty (180) days from AT&T’s CNL identifying the Subsequent Wire Center List, TWTC shall submit an LSR(s) or spreadsheet(s) as applicable, identifying the Subsequent Embedded Base of circuits to be disconnected or converted to other AT&T services. 5.4.6.5.1 In the case of disconnection, the applicable disconnect charges set forth in this Agreement shall apply. 5.4.6.5.2 If TWTC chooses to convert DS1 and/or DS3 Dedicated Transport to special access circuits in existence as of the Effective Date of this Agreement, AT&T will include such DS1 and/or DS3 Dedicated Transport within TWTC’s total special access circuits, and apply any discounts to which TWTC is entitled from the transition period of 3/11/2006 to the conversion date. Conversions will be subject to the switch-as-is charge set forth in Exhibit A to this Attachment 2. 5.4.6.5.3 AT&T shall not impose disconnect or nonrecurring installation charges when transitioning the Subsequent Embedded Base of DS1 and DS3 Dedicated Transport in existence as of the Effective Date of this Agreement. 5.4.6.6 If TWTC fails to submit the LSR(s) or spreadsheet(s) for all of its Subsequent Embedded Base by one hundred eighty (180) days after the date of AT&T’s CNL identifying the Subsequent Wire Center List, AT&T will identify TWTC’s remaining Subsequent Embedded Base, if any, and will transition such circuits to the equivalent tariffed AT&T service(s), or in the case of Georgia, to the equivalent 271 service(s) set forth in Exhibit 1. In the states of Florida, Kentucky, Mississippi and South Carolina, those circuits identified and transitioned by AT&T shall be subject to the applicable disconnect charges as set forth in this Agreement and the full nonrecurring charges for installation of the equivalent tariffed AT&T service as set forth in AT&T’s tariffs. In the states of Alabama, Georgia, North Carolina and Tennessee, those circuits identified and transitioned by AT&T shall be subject to the applicable switch-as-is rates set forth in Exhibit A of Attachment

  • 200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, glass, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes

  • CFR PART 200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, class, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes

  • Please see the current Washtenaw Community College catalog for up-to-date program requirements Conditions & Requirements

  • Engineer Payment of Subproviders No later than ten (10) days after receiving payment from the State, the Engineer shall pay all subproviders for work performed under a subcontract authorized hereunder. The State may withhold all payments that have or may become due if the Engineer fails to comply with the ten-day payment requirement. The State may also suspend the work under this contract or any work authorization until subproviders are paid. This requirement also applies to all lower tier subproviders, and this provision must be incorporated into all subcontracts.

  • Paid Claims without Supporting Documentation Any Paid Claim for which Xxxxxxx cannot produce documentation shall be considered an error and the total reimbursement received by Xxxxxxx for such Paid Claim shall be deemed an Overpayment. Replacement sampling for Paid Claims with missing documentation is not permitted.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!