Purchase of Products You agree to purchase from Us the hardware products, software licenses and services listed on the Order Form, together with all existing accessories, attachments, replacements, and additions (collectively the “Products”) upon the terms stated herein. For the avoidance of doubt, postage meters for use in mailing machines are excluded from the definition of Products. This Purchase Agreement is binding on You as of the date You sign it. This Purchase Agreement is not binding on Us until We sign it or until the Products are shipped, whichever happens first.
Supply of Products
3.1 The Supplier warrants that the Products shall:
(a) correspond with their description and any applicable Product Specification;
(b) conform in all respects with the Order and any relevant sample;
(c) be of satisfactory quality and fit for any purpose held out by the Supplier or made known to the Supplier by Ornua, expressly or by implication, and in this respect Ornua relies on the Supplier's skill and judgement;
(d) be manufactured by properly trained and qualified personnel using all reasonable skill, care and diligence and in a good and workmanlike manner;
(e) where they are manufactured products, be free from defects in design, materials and workmanship and remain so for the period set out in the Product Specification or, if none is specified, for at least 12 months after delivery;
(f) comply with all applicable statutory and regulatory requirements relating to the manufacture, labelling, packaging, storage, handling and delivery of the Products;
(g) comply with all relevant standards including any UK Standards, European Standards or International Standards applicable in the UK and the country or State where the Products are to be used; and
(h) in the case of Products containing food stuffs, when delivered to Ornua, comply with all applicable food and hygiene legislation and regulations and best industry practice.
3.2 The Supplier shall ensure that at all times it has and maintains all licences, permissions, authorisations, consents and permits needed to carry out its obligations under the Contract in respect of the supply of Products. Breach of this Condition shall be deemed a material breach of the Contract.
3.3 Ornua may inspect and test the Products at any time before delivery. The Supplier shall remain fully responsible for the Products despite any such inspection or testing and any such inspection or testing shall not reduce or otherwise affect the Supplier's obligations under the Contract.
3.4 If following such inspection or testing Ornua considers that the Products do not comply or are unlikely to comply with the Supplier's undertakings at clause 3.1, Ornua shall inform the Supplier and the Supplier shall immediately take such remedial action as is necessary to ensure compliance.
3.5 Ornua may conduct further inspections and tests after the Supplier has carried out its remedial actions.
Supply of Product Salix shall use reasonable efforts to supply the Product during the Co-Promotion Period in sufficient quantities to satisfy the levels of Product sales forecasted in the then current Marketing Plan. Salix shall maintain reasonable inventory levels of the Product in order to ensure their ability to fulfill this obligation. Salix shall have the sole responsibility and right to fill orders with respect to the Product. Altana shall not solicit orders for the Product but, if for any reason, Altana shall receive an order for the Product, Altana shall promptly forward to Salix any such orders. All orders for Product shall be subject to acceptance by Salix, in its sole discretion, which acceptance shall not be unreasonably withheld. Salix may cancel any order for Product at any time after acceptance without incurring any liability to Altana. Salix shall be solely responsible for responding to requests from Target Physicians for individual patients who need the Product but are unable to afford it. Any such request shall be forwarded by Altana to Salix for processing. Salix shall have the sole right and responsibility for establishing and modifying the terms and conditions of the sale of the Product, including (a) the price at which the Product will be sold, (b) whether the Product will be subject to trade or quantity discounts, (c) whether any discount will be provided for payments on accounts receivable, (d) whether the Product will be subject to rebates, returns and allowances or retroactive price reductions, (e) the channels of distribution of the Product, and (f) whether credit [*] Confidential treatment requested; certain information omitted and filed separately with the SEC. is to be granted or refused in connection with any sale of Product. In the event that Salix fails to supply the Product as required pursuant to this Agreement for any reason other than a Force Majeure, which such failure results in lost sales for Altana, the Parties shall meet and attempt to negotiate a mutually agreeable and commercially reasonable solution. If the Parties cannot reach such an agreement within a reasonable period of time, the issue will be dealt with as contemplated under Section 4.4 of this Agreement.
Licensed Products Lessee will obtain no title to Licensed Products which will at all times remain the property of the owner of the Licensed Products. A license from the owner may be required and it is Lessee's responsibility to obtain any required license before the use of the Licensed Products. Lessee agrees to treat the Licensed Products as confidential information of the owner, to observe all copyright restrictions, and not to reproduce or sell the Licensed Products.
Use of Products 3.28.1 In the performance of this Agreement, Consultant shall make maximum use of products containing recovered materials that are EPA-designated items unless the product cannot be acquired (i) competitively within a timeframe providing for compliance with the contract performance schedule; (ii) meeting contract performance requirements; or (iii) at a reasonable price.
3.28.2 Consultant shall abide by the list of EPA-designated items available on EPA’s Comprehensive Procurement Guidelines web site: xxxxx://xxx.xxx.xxx/smm/comprehensive-procurement-guideline-cpg-program.
Purchase Order Pricing/Product Deviation If a deviation of pricing/product on a Purchase Order or contract modification occurs between the Vendor and the TIPS Member, TIPS must be notified within five (5) business days of receipt of change order. TIPS reserves the right to terminate this agreement for cause or no cause for convenience with a thirty (30) days prior written notice. Termination for convenience is conditionally required under Federal Regulations 2 CFR part 200 if the customer is using federal funds for the procurement. All purchase orders presented to the Vendor, but not fulfilled by the Vendor, by a TIPS Member prior to the actual termination of this agreement shall be honored at the option of the TIPS Member. The awarded Vendor may terminate the agreement with ninety (90) days prior written notice to TIPS 0000 XX Xxx Xxxxx, Xxxxxxxxx, Xxxxx 00000. The vendor will be paid for goods and services delivered prior to the termination provided that the goods and services were delivered in accordance with the terms and conditions of the terminated agreement. This termination clause does not affect the sales agreements executed by the Vendor and the TIPS Member customer pursuant to this agreement. TIPS Members may negotiate a termination for convenience clause that meets the needs of the transaction based on applicable factors, such as funding sources or other needs. Usually, purchase orders or their equal are issued by participating TIPS Member to the awarded vendor and should indicate on the order that the purchase is per the applicable TIPS Agreement Number. Orders are typically emailed to TIPS at xxxxxx@xxxx-xxx.xxx. • Awarded Vendor delivers goods/services directly to the participating member. • Awarded Vendor invoices the participating TIPS Member directly. • Awarded Vendor receives payment directly from the participating member. • Fees are due to TIPS upon payment by the Member to the Vendor. Vendor agrees to pay the participation fee to TIPS for all Agreement sales upon receipt of payment including partial payment, from the Member Entity or as otherwise agreed by TIPS in writing and signed by an authorized signatory of TIPS.
Sale of Products (a) All shipments, services, sales, and quotations between Sierra Packaging and Converting, LLC, a Nevada limited liability company (“Seller”) and the undersigned purchaser (“Purchaser”) for the purchase of products (“Products”) shall be subject to these Terms and Conditions of Sale, including all exhibits and attachments hereto (these “Terms” or this “Agreement”). Purchaser acknowledges receipt hereof and accepts these Terms. ANY ADDITIONAL OR DIFFERENT TERMS OR CONDITIONS CONTAINED IN ANY RESPONSE HERETO BY PURCHASER OR IN PURCHASER’S INITIAL ORDER ARE HEREBY REJECTED BY SELLER WITHOUT NEED OF FURTHER NOTICE OF REJECTION AND SHALL BE OF NO EFFECT AND IN NO CIRCUMSTANCES BINDING ON SELLER. Seller’s acceptance of any order offered by Purchaser is EXPRESSLY MADE CONDITIONAL on Purchaser’s assent to these Terms, and under no circumstances will any terms other than these Terms apply to Seller’s sale of the Products.
(b) Seller’s quotations are binding on Seller for sixty (60) days after receipt by Purchaser. Each order of Products shall be in writing and no order of Purchaser shall be binding on Seller until the earlier of (i) shipment to Purchaser of Products or (ii) transmittal of a written acceptance by Seller. Seller’s failure to respond to Purchaser’s order within two (2) weeks after receipt of the order shall be a rejection of the order.
(c) Purchaser may not cancel any order after it has become binding pursuant to subsection (b) above. Notwithstanding the foregoing, either party may cancel an accepted order which has not yet been produced if the other party (i) makes an assignment for the benefit of creditors, (ii) becomes party to a voluntary or involuntary proceeding of insolvency, bankruptcy or reorganization, (iii) generally becomes unable to pay its debts as they become due, (iv) in the case of Seller, if Purchaser fails to remit payment to Seller in accordance with the terms hereof and such failure continues for 10 days after Purchaser's receipt of notice from Seller concerning Purchaser’s non-payment, or (v) breaches any other material term, provision or condition contained in these Terms which breach continues for 30 days after such party receives written notice of such breach. If Purchaser terminates an order in accordance with the foregoing, Purchaser shall nevertheless be liable to Seller for the full purchase price for all Products represented by such terminated order completed at the time of termination but not yet shipped and for all of Seller’s costs and expenses (but not the profit component) for all Products in process at the time of termination.
(d) All references in sales brochures, data sheets, and offers as to specifications, price, and other details of the Products are approximate and shall not be binding on the Seller unless expressly set out in an accepted quotation or order or otherwise agreed to in writing. Seller may, from time to time, update and replace Products in its line. Seller reserves the right to substitute updated Products, provided that such updated Products meet the requirements of this Agreement and the specifications of the ordered Products in all material respects and are sold for the same price as the ordered Products.
(e) Purchaser acknowledges that Seller’s acceptance of any purchase order is dependent on Seller’s prior approval of Purchaser’s credit. Purchaser shall cooperate should Seller from time to time request reasonable assurances of Purchaser’s continuing ability to pay by requesting such trade or banking references or a letter of credit or such other information as reasonably deemed adequate by Seller.
Marketing of Production Except for contracts listed and in effect on the date hereof on Schedule 7.19, and thereafter either disclosed in writing to the Administrative Agent or included in the most recently delivered Reserve Report (with respect to all of which contracts the Borrower represents that it or its Subsidiaries are receiving a price for all production sold thereunder which is computed substantially in accordance with the terms of the relevant contract and are not having deliveries curtailed substantially below the subject Property’s delivery capacity), no material agreements exist which are not cancelable on 60 days notice or less without penalty or detriment for the sale of production from the Borrower’s or its Subsidiaries’ Hydrocarbons (including, without limitation, calls on or other rights to purchase, production, whether or not the same are currently being exercised) that (a) pertain to the sale of production at a fixed price and (b) have a maturity or expiry date of longer than six (6) months from the date hereof.
Purchase and Sale of Products (a) Pursuant to Purchase Orders issued by MLNA/MLMX, Supplier shall sell and deliver to MLNA/MLMX, and MLNA/MLMX shall purchase from Supplier, Products specified in Purchase Orders. Such purchases and sales shall be for Products and Prices set forth on Schedule A. Any Affiliate of MLNA/MLMX shall also be entitled to issue Purchase Orders and purchase Products from Supplier under the terms of this Agreement. Only the specific MLNA/MLMX Party issuing a Purchase Order will be liable to Supplier for obligations in connection with a Purchase Order. Neither MLNA or MLMX or any Affiliate of either of them will be liable to Supplier for any obligations of any other MLNA/MLMX Party or Affiliate.
(b) During the term hereof, MLNA/MLMX may, but shall not be required to, provide Supplier with estimates or forecasts of MLNA/MLMX´s requirements for Products from Supplier. Any forecasts or estimates are for information purposes only and may be modified by MLNA/MLMX at any time and in its sole discretion. Any product quantities cited in or pursuant to this Agreement, except for quantities cited in a Purchase Order as firm, are preliminary and non-binding only. MLNA/MLMX makes no representation, warranty or agreement as to the quantity of products that it will purchase from Supplier, if any, or that MLNA/MLMX will buy Products exclusively from Supplier.
(c) MLNA/MLMX shall issue Purchase Orders to Supplier and Supplier shall confirm to MLNA/MLMX the receipt of each Purchase Order issued hereunder (each, a "Confirmation") within [NUMBER] Business Days following Supplier's receipt thereof. Each Confirmation must reference MLNA/MLMX's Purchase Order number and confirm acceptance of the Purchase Order unless Supplier timely advises MLNA/MLMX that Supplier is unwilling to accept any terms or conditions in the applicable Purchase Order that conflict with the terms and conditions of this Agreement. If Supplier fails to issue a Confirmation within the time set forth above or otherwise commences performance under such Purchase Order, Supplier will be deemed to have accepted the Purchase Order. MLNA/MLMX may withdraw any Purchase Order prior to Supplier's acceptance (or deemed acceptance) thereof.
(d) MLNA/MLMX may, in its sole discretion, on notice to Supplier, without liability or penalty, terminate all or any part of a Purchase Order with or without cause effective immediately or otherwise as specified in such notice. Upon any such termination, Supplier shall immediately cease work and purchasing materials relating to fulfilling the Purchase Order, and deliver to MLNA/MLMX on request all or any portion of Products under the relevant Purchase Order at the Prices.
(e) MLNA/MLMX may, on notice to Supplier, request changes to a Purchase Order. On or before the second Business Day after receiving the request, Supplier shall submit to MLNA/MLMX its good faith description of the impact of such changes on the Basic Purchase Order Terms. MLNA/MLMX may then submit an amended Purchase Order reflecting all MLNA/MLMX-accepted changes.
Product Changes Vocera shall have the right, in its absolute discretion, without liability to End User, to update to provide new functionality or otherwise change the design of any Product or to discontinue the manufacture or sale of any Product. Vocera shall notify End User at least 90 days prior to the delivery of any Product which incorporates a change that adversely affects form, fit or function (“Material Change”). Vocera shall also notify End User at least 90 days prior to the discontinuance of manufacture of any Product. Notification will be made as soon as reasonably practical for changes associated with regulatory or health and safety issues.
