Sanitary Appliances Clause Samples
The 'Sanitary Appliances' clause defines the requirements and standards for the installation, quality, and maintenance of fixtures such as toilets, sinks, showers, and other plumbing-related equipment within a property or construction project. Typically, this clause specifies the types of appliances to be used, their compliance with relevant codes or regulations, and the responsibilities for their upkeep or replacement. By setting clear expectations for sanitary facilities, the clause ensures health, safety, and functionality for occupants, while also preventing disputes over the adequacy or condition of these essential installations.
Sanitary Appliances. All sanitary appliances shall be carefully stored under cover to prevent damage. When accepting and storing appliances, advance planning shall be made regarding the sequence of removal from the store to the assembly positions. Supporting brackets shall be so stored as to be readily accessible for use with the appliances.
Sanitary Appliances. The Lessee shall not use or permit to be used the toilets sinks drains and other plumbing facilities in the Premises for any purpose other than that for which they were respectively designed constructed or provided and shall not deposit or permit to be deposited therein any sweepings rubbish or other matter.
Sanitary Appliances. 18.2.1 All sanitary appliances shall be of vitreous China, unless otherwise indicated and shall conform to IS 2556(Part I) -1994; Specification for vitreous sanitary appliances, Part I. General requirements and shall be ofapproved make. Appliances shall be strong, of high grade and shall be coated on all exposed surface with animpervious white vitreous glaze. The glaze shall be uniform, free from craze and discolouration and shallpossess an impervious surface.
18.2.2 Sanitary appliances shall be of one piece construction. Water closets and urinals shall have anintegral flushing rim. Inside of the pans shall be regular and smooth in order to ensure efficient flush.
18.2.3 All waste pipe and fittings upto floor/nahani trap shall be galvanized tubing light grade all as specified in clause 18.4 of MES schedule Part I.
18.2.4 Flush pipe and socket of flushing rim of WC shall be jointed with white cement and red lead (white cement and red lead in equal proportion by weight) and linseed oil to form paste.
18.2.5 ‘P’ or ‘S’ trap shall be jointed to WC pan with cement joints as per specified in clauses 18.48.5 of MES Schedule Part I.
Sanitary Appliances. The installation of sanitary appliances shall be in accordance with C.P. 305 : 1952 and B.S. 3202 : 1959 The appliances shall be fixed in the positions shown on the Drawings or as directed by the Architect. For all sanitary appliances, the necessary number of supports, brackets, plugs, screws, washers, jointing materials, etc., shall be provided. Where supports, brackets, etc., are screwed to wall or structures, "Rawlplugs" or similar shall be used. Notraps for any appliance whatsoever shall have a seal less than 75 mm. Fixing shall, if required by the Architect, include for temporarily erecting appliances in the required position of service and discharge pipes, taking down, storing and permanently fixing after completion of wall finishings and connecting to service and discharge pipes. Care shall be taken at all times and particularly after fixing, to protect appliances from damage. Upon completion of the work, all appliances shall be cleaned of plaster, paint, etc., and carefully examined for defects.
Sanitary Appliances. White ceramic sanitary-▇▇▇▇, provision for disabled facility, full height mirrors over limestone vanity units with inset bowls, stainless steel/chrome taps and towel dispenser.
Sanitary Appliances