Shipping and Delivery a. The prices are the delivered price to any Purchasing Entity. All deliveries shall be F.O.B. destination, freight pre-paid, with all transportation and handling charges paid by the Contractor. Responsibility and liability for loss or damage shall remain the Contractor’s until final inspection and acceptance when responsibility shall pass to the Purchasing Entity except as to latent defects, fraud and Contractor’s warranty obligations. The minimum shipment amount, if any, will be found in the special terms and conditions. Any order for less than the specified amount is to be shipped with the freight prepaid and added as a separate item on the invoice. Any portion of an Order to be shipped without transportation charges that is back ordered shall be shipped without charge.
b. All deliveries will be “Inside Deliveries” as designated by a representative of the Purchasing Entity placing the Order. Inside Delivery refers to a delivery to other than a loading dock, front lobby, or reception area. Specific delivery instructions will be noted on the order form or Purchase Order. Any damage to the building interior, scratched walls, damage to the freight elevator, etc., will be the responsibility of the Contractor. If damage does occur, it is the responsibility of the Contractor to immediately notify the Purchasing Entity placing the Order.
c. All products must be delivered in the manufacturer’s standard package. Costs shall include all packing and/or crating charges. Cases shall be of durable construction, good condition, properly labeled and suitable in every respect for storage and handling of contents. Each shipping carton shall be marked with the commodity, brand, quantity, item code number and the Purchasing Entity’s Purchase Order number.
ORDERING AND DELIVERY An Order will be binding on both parties when signed by authorized representatives of Licensee. Each Order shall include the following information: (a) the Software licensed or to which Support and Maintenance shall apply, and (b) the applicable fees. No additional or different terms in any purchase order or similar document shall modify the terms of this Agreement. For purposes of this Agreement, initial delivery of the Software and Documentation will be deemed to have occurred upon MyECheck providing Licensee with a password to access a web page from which Licensee may download the Software and Documentation. The Software will be deemed accepted upon initial delivery, subject to the warranties in Section 9.
Shipment and Delivery Seller grants the Company the right at any time to specify the carrier and/or method of transportation to be employed in conveying any part or all of the Goods covered herein. In the event that Seller uses an unauthorized carrier and/or method of transportation, then all shipping expenses shall be assumed by Seller. Unless otherwise stated in the Order, all Goods will be shipped FCA shipment point. FCA shall be interpreted in accordance with the version of Incoterms valid at the time of the Seller’s acceptance of the Order. The Seller shall be responsible for preparing and filing all export documentation for all shipments. The Company shall not be obligated to accept early deliveries, partial deliveries or excess deliveries. If Goods are incorrectly delivered, the Seller shall be responsible for any additional expense incurred in delivering the Goods to the correct destination. The delivery date set forth on the Order is of the essence of the Contract. If the Seller anticipates that it will not be able to deliver the Goods upon the agreed delivery date, then the Seller shall immediately notify the Company thereof in writing; provided, however, that such notice shall not relieve the Seller of its responsibilities and liabilities with respect to on-time delivery hereunder. In such event, the Company may request that the Seller expedite delivery to the maximum extent possible at the Seller’s sole expense. If the Seller does not deliver the Goods by the agreed delivery date, then the Company shall be entitled to liquidated damages as agreed between the parties, up to and including the total Order value. Notwithstanding the foregoing, the Company reserves the right to claim repayment for any and all costs, losses, expenses and damages incurred by the Company that are attributable to the Seller’s delay in delivery. Such liquidated damages shall be paid at the Company’s written demand. Partial deliveries shall not relieve the Seller from liability for any late delivery hereunder. If the Seller discovers that it has shipped any non-conforming Goods to the Company, it shall immediately (and not more than 24 hours after such discovery) notify the Company thereof in writing; provided, however, that such notice shall not relieve the Seller of its responsibilities and liabilities with respect to defective goods hereunder.
Transportation and Delivery Prices shall include all charges for packing, handling, freight, distribution, and inside delivery. Transportation of goods shall be FOB Destination to any point within thirty (30) days after the Customer places an Order. A Contractor, within five (5) days after receiving a purchase order, shall notify the Customer of any potential delivery delays. Evidence of inability or intentional delays shall be cause for Contract cancellation and Contractor suspension.
Project Delivery Contractor shall construct the Project in accordance with the Contract Documents, and Contractor shall deliver the Project completed in accordance with the Contract Documents, substantially free from defects, and within the Contract Time.
Orders and Delivery 4.1 The Purchaser may from time to time place Purchase Orders on the Supplier for the Goods and/or Services. Nothing in this Agreement shall prevent the Purchaser from purchasing the same or similar goods and services from a third party.
4.2 The Purchaser may at any time terminate a PO, or where applicable this Agreement, for convenience if the relevant contract in terms whereof Goods and/or Services are on-sold by the Purchaser to a Customer is terminated, by giving the Supplier 30 (thirty) days’ written notice to such effect, in which event the Purchaser shall be liable to pay only for Goods ordered under Purchase Orders placed prior to the delivery of such notice of termination.
4.3 The Goods to be supplied pursuant to this Agreement shall be delivered by the Supplier DDP Delivered Duty Paid (at the Purchaser’s or the Customer’s premises, Gauteng) on or before the delivery date/s stated in the relevant PO or delivery schedule. Time is of the essence in the performance of the Supplier’s obligations.
4.4 Subject to the Supplier’s strict compliance with this clause 4, the Purchaser shall grant to the Supplier an extension of time if and to the extent that delivery is or will be delayed by the following causes:
4.4.1 Additional Goods and/or Services are ordered under clause 5, or
4.4.2 Any delay, impediment or prevention caused by either force majeure or the Purchaser occurs.
4.5 If the Supplier considers itself entitled to an extension of time, the Supplier shall give notice to the Purchaser describing the event or circumstance giving rise to the requested extension of time (in this clause referred to as the “claim”). The notice shall be given as soon as practicable, and in any event not later than 2 (two) days after the Supplier became aware, or should have become aware, of the event or circumstance.
4.6 Within 7 (seven) days after the Supplier sent the notice referred to in clause 4.5 or within such other period as may be proposed by the Supplier and approved by the Purchaser, the Supplier shall send to the Purchaser a fully detailed claim and revised draft delivery schedule which includes full supporting particulars of the basis and duration of the claim. If the event or circumstance giving rise to the claim has a continuing effect:
4.6.1 this fully detailed claim shall be considered as interim;
4.6.2 the Supplier shall send further interim claims at weekly intervals, giving the accumulated delay, and such further particulars as the Purchaser may reasonably require; and
4.6.3 the Supplier shall send a final claim within 7 (seven) days after the end of the effects resulting from the event or circumstance, or within such other period as may be proposed by the Supplier and approved by the Purchaser.
4.7 Within 7 (seven) days after receiving a claim or any further particulars supporting a previous claim, or within such other period as may be proposed by the Purchaser and approved by the Supplier, the Purchaser shall respond with approval, or with disapproval and detailed comments. It may also request further clarification or additional particulars. Should the Purchaser fail to respond within the stated time, it shall be deemed to have rejected the claim.
4.8 A revised delivery schedule shall only become valid and binding once approved by the Purchaser, which approval shall not be unreasonably withheld.
Closing and Delivery The purchase price for the Purchased Units is payable by check or wire transfer payable to the Company or its designee in an amount equal to the applicable purchase price per unit multiplied by the number of Units being purchased by such Subscriber.
PACKING AND SHIPMENT (a) Unless otherwise specified, all Work is to be packed in accordance with good commercial practice.
(b) A complete packing list shall be enclosed with all shipments. SELLER shall mark containers or packages with necessary lifting, loading, and shipping information, including the LOCKHEED XXXXXX Contract number, item number, dates of shipment, and the names and addresses of consignor and consignee. Bills of lading shall include this Contract number.
(c) Unless otherwise specified, delivery shall be FOB Place of Shipment.
PACKING AND SHIPPING a. Seller shall pack the goods and materials to prevent damage and deterioration. Unless otherwise set forth in this Contract, Seller shall package the goods in accordance with the requirements of Boeing Document D37522-6 “Supplier Packaging”. Buyer may charge Seller for damage to or deterioration of any goods resulting from improper packing or packaging.
b. If the Contract specifies FOB destination (place of delivery), then in addition to any other shipping instructions, Seller shall forward goods freight prepaid. Seller shall make the transportation arrangements, pay the shipping costs, and remain responsible for the goods and materials until the goods and materials are delivered and the Buyer takes possession at the destination.
c. If the Contract specifies FOB origin (place of shipment), then in addition to any other shipping instructions, Seller shall forward goods collect. For goods shipped within the United States, Seller shall make no declaration concerning the value of the goods shipped except on goods where the tariff rating is dependent upon released or declared value. In such event, Seller shall release or declare such value at the maximum value within the lowest rating. Seller will ship the goods in accordance with the provisions set forth in the Boeing Domestic Shipment Routing Guide to be accessed through Buyer’s supplier portal at xxxxx://xxxxxx.xxxxxxx.xxx/. Sellers need a One Time Password (OTP) token to log into the Boeing Supplier Portal. Upon Xxxxx’s request, Seller will identify packaging charges showing material and labor costs for container fabrication.
d. Seller shall provide with each container shipped under this Contract an Advanced Shipping Notice (“ASN”). For each container shipped, Seller shall provide two (2) readable copies of the ASN barcode as follows: one (1) copy is to be securely affixed to the outside of each container and one (1) copy is to be loose inside each container. Non- conforming shipments are subject to rejection and repackaging at Seller’s expense. Instructions and guidelines related to the ASN process can be found on the Boeing Supplier Portal. Seller shall access by selecting the “Enterprise ASN Instructions” hyper-link under the header “Exostar Resources”. A copy of these instructions can also be found at xxx.xxxxxxx.xxx.
SHIPPING AND SHIPPING COSTS All delivered Equipment and Products must be properly packaged. Damaged Equipment and Products may be rejected. If the damage is not readily apparent at the time of delivery, Supplier must permit the Equipment and Products to be returned within a reasonable time at no cost to Sourcewell or its Participating Entities. Participating Entities reserve the right to inspect the Equipment and Products at a reasonable time after delivery where circumstances or conditions prevent effective inspection of the Equipment and Products at the time of delivery. In the event of the delivery of nonconforming Equipment and Products, the Participating Entity will notify the Supplier as soon as possible and the Supplier will replace nonconforming Equipment and Products with conforming Equipment and Products that are acceptable to the Participating Entity. Supplier must arrange for and pay for the return shipment on Equipment and Products that arrive in a defective or inoperable condition. Sourcewell may declare the Supplier in breach of this Contract if the Supplier intentionally delivers substandard or inferior Equipment or Products.
