Seller Purchased Equipment (SPE) and/or Buyer Furnished Equipment Sample Clauses

Seller Purchased Equipment (SPE) and/or Buyer Furnished Equipment. (BFE). Provisions relating to the terms under which Boeing may offer or install SPE and/or BFE in the Slide Aircraft. [***] By [***] Its Attorney-In-Fact ACCEPTED AND AGREED TO this Date: [***] [***] [***] [***] The Boeing Company X.X. Xxx 0000 Xxxxxxx, XX 00000 2207 Subject: Advance Payment Matters – Slide Aircraft Reference: Purchase Agreement No. PA-3075 (Purchase Agreement) between The Boeing Company (Boeing) and Aerovias del Continente Americano S.A. Avianca (Customer) relating to Model 787-9 aircraft (Aircraft) This letter agreement (Letter Agreement) amends and supplements the Purchase Agreement. All terms used but not defined in this Letter Agreement will have the same meaning as in the Purchase Agreement. The Purchase Agreement incorporates the terms and conditions of AGTA-AVI between Boeing and Customer. This Letter Agreement modifies certain terms and conditions of the AGTA with respect to the Aircraft. Customer and Boeing have agreed to revise [***] (Slide Aircraft).
AutoNDA by SimpleDocs
Seller Purchased Equipment (SPE) and/or Buyer Furnished Equipment. (BFE). Provisions relating to the terms under which Boeing may offer or install SPE and/or BFE in the Aircraft. [**] Represents material which has been redacted and filed separately with the Securities and Exchange Commission pursuant to a request for confidential treatment pursuant to Rule 406 under the Securities Act of 1933, as amended. Very truly yours, THE BOEING COMPANY By /s/ Sydney X. Xxxx Its Attorney-In-Fact ACCEPTED AND AGREED TO this Date: September 19, 2017 AEROVIAS DEL CONTINENTE AMERICANO S.A. AVIANCA By /s/ Xxxxxxx Held Its Legal Representative Memo Number: B-R502-16-062 Revision: E Valid through 15-SEP-2017 This Memo consists of two sections; the current Boeing Qualified Supplier List and the Customer Specific Offerable Seat Product List. In order to support an airline’s contractual supplier selection dates, the Boeing Contracts Regional Director requests the Customer-Specific Offerable Passenger Seat Products List after the details for customer’s unique program are established. The Customer-Specific Offerable Passenger Seat Products List is developed based on considerations such as the customer’s unique program particulars — including airplane schedules, delivery stream, and configuration complexities — in conjunction with an assessment of each seat supplier’s performance, capacity, and capability. Certain seat products may be deemed not offerable or offerable with constraints based on this review, subject to Project Based Offerability. Boeing reserves the right to limit, change, or modify the Qualified Supplier List and Customer-Specific Offerable Passenger Seat Product List when required. Current release supersedes all prior revisions. Changes to delivery stream, aircraft quantity, or supplier performance might require a re-evaluation — and potential modification — of suppliers and seat products included in this list. This document contains supplier competitive sensitive information. In order to maintain the integrity of the data, Seat Procurement Management requests that security precautions be taken when sharing this information with Customers and/or internal Boeing personnel. This document is intended only for Boeing employees and non-Boeing persons with authorized access. Use and distribution of this document and its contents is subject to PRO-2227, “Information Protection,” and PRO-3439, “Release of Information Outside The Boeing Company,” as well as other applicable company, contractual, and government restrictions. Memo Number: B...
Seller Purchased Equipment (SPE) and/or Buyer Furnished Equipment. (BFE). Provisions relating to the terms under which Boeing may offer or install SPE and/or BFE in the Aircraft. GUN-PA-04666-LA-1703155 Open Configuration Matters Page 2 Very truly yours, AGREED AND ACCEPTED this Date THE BOEING COMPANY By Its Attorney-In-Fact CHINA SOUTHERN AIRLINES COMPANY LIMITED By Its CHINA SOUTHERN AIRLINES GROUP IMPORT AND EXPORT TRADING CORP., LTD. By Its GUN-PA-04666-LA-1703155 Open Configuration Matters Page 3 The Boeing Company X.X. Xxx 0000 Xxxxxxx, XX 00000 2207 XXX-XX-00000-XX-0000000 Xxxxx Southern Airlines Company Limited Xx. 000, Xxxxxxx Xxxx, Xxxxxx Xxxxxxxx, Xxxxxxxxx, People’s Republic of China, 510406 Subject: Integrated Performance Remedy Reference: Purchase Agreement No. PA-04666 (Purchase Agreement) between The Boeing Company (Boeing) and China Southern Airlines Company Limited (Customer) relating to Model 777-300ER aircraft (Aircraft) This letter agreement (Letter Agreement) amends and supplements the Purchase Agreement. All terms used but not defined in this Letter Agreement will have the same meaning as in the Purchase Agreement.
Seller Purchased Equipment (SPE) and/or Buyer Furnished Equipment. (BFE). Provisions relating to the terms under which Boeing may offer or install SPE and/or BFE in the Aircraft.

Related to Seller Purchased Equipment (SPE) and/or Buyer Furnished Equipment

  • Required Equipment Employees are expected to be at their individual work stations with required equipment in operable condition at the scheduled shift starting time.

  • Leased Equipment The risk of loss or damage to leased equipment, goods or property shall not transfer to the University except as provided in §680.219, Florida Statutes. Any security interest in the leased equipment, goods or property granted to the Contractor contrary to AGO 79-72 and AGO 80-9 is null and void. Limitations of remedies provisions, which are unconscionable under applicable Florida law, are void. MATERIAL SAFETY DATA SHEET (MSDS). In compliance with Florida Statutes, Ch. 442, a Material Safety Data Sheet (MSDS) must accompany any applicable item delivered under this Agreement.

  • Stored equipment We accept no responsibility for any stored equipment or other property brought on to or left at the premises, and all liability for loss or damage is hereby excluded. All equipment and other property (other than stored equipment) must be removed at the end of each hiring or we will charge fees each day or part of a day at the hire fee per hiring until the same is removed. We may, in our discretion, dispose of any items referred to below by sale or otherwise on such terms and conditions as we think fit, and charge you any costs we incur in storing and selling or otherwise disposing of the same, in any of the following circumstances: (i) your failure either to pay any charges in respect of stored equipment due and payable or to remove the same within seven days after the agreed storage period has ended (ii) your failure to dispose of any property brought on to the premises for the purposes of the hiring.

  • Transferred Assets (i) From the Closing Date to the Effective Date, OLS sold and/or contributed, assigned, transferred, and conveyed to the Depositor, and the Depositor acquired from OLS, without recourse except as provided under the Original Receivables Sale Agreement, all of OLS’s right, title and interest, whether now owned or hereafter acquired, in, to and under each Receivable (1) in existence on the Closing Date and in existence on any Business Day after the Closing Date and prior to the Effective Date that is listed as a “Designated Servicing Agreement” on the Designated Servicing Agreement Schedule as of the date such Receivable is created (the “Initial Receivables”), and (2) all monies due or to become due and all amounts received or receivable with respect thereto and all proceeds (including “proceeds” as defined in the Uniform Commercial Code in effect in all applicable jurisdictions (the “UCC”)), together with all rights of OLS to enforce such Initial Receivables (collectively, the “Original Transferred Assets”). (ii) Commencing on the Effective Date, and until the opening of business on the MSR Transfer Date for each Designated Servicing Agreement, pursuant to the Purchase Agreement, OLS will sell to HLSS, for a cash purchase price equal to 100% of the Receivable Balances thereof, (1) each Receivable, in existence on any Business Day on or after the Effective Date and until the opening of business on the related MSR Transfer Date, that arises under any Servicing Agreement that is listed as a “Designated Servicing Agreement” on the Designated Servicing Agreement Schedule as of the date such Receivable is created (“OLS Additional Receivables”) for which the MSR Transfer Date has not yet occurred, and (2) all monies due or to become due and all amounts received or receivable with respect thereto and all proceeds (including “proceeds” as defined in the UCC), together with all rights of HLSS to enforce such OLS Additional Receivables (collectively, the “OLS Transferred Assets”). (iii) Commencing on the Effective Date, and until the close of business on the Receivables Sale Termination Date, subject to the provisions of this Agreement, HLSS, as receivables seller, hereby sells and/or contributes, assigns, transfers, and conveys to the Depositor, and the Depositor acquires from HLSS, without recourse except as provided herein, all of HLSS’s right, title and interest, whether now owned or hereafter acquired, in, to and under (1) each Receivable in existence on any Business Day on or after the Effective Date and prior to the Receivables Sale Termination Date (including the OLS Additional Receivables) that arises under any Servicing Agreement that is listed as a “Designated Servicing Agreement” on the Designated Servicing Agreement Schedule as of the date such Receivable is created (“Additional Receivables”), and (2) all monies due or to become due and all amounts received or receivable with respect thereto and all proceeds (including “proceeds” as defined in the UCC) (including the OLS Transferred Assets), together with all rights of HLSS to enforce such Additional Receivables (collectively, the “Transferred Assets”). Until the Receivables Sale Termination Date, HLSS shall, automatically and without any further action on its part, sell and/or contribute, assign, transfer and convey to the Depositor, on each Business Day, each Additional Receivable not previously transferred to the Depositor and the Depositor shall purchase each such Additional Receivable together with all of the other Transferred Assets related to such Receivable.

  • Seller Deliverables At the Closing, Seller shall take the following actions (or cause such actions to be taken): (i) deliver to Purchaser a copy of the Escrow Agreement, duly executed by Xxxxxx; (ii) deliver to Purchaser a certification from the Company that complies with Section 1445 of the Code and Treasury Regulations Sections 1.1445-2(c)(3) and 1.897-2(h), dated as of the Closing Date and executed by a responsible corporate officer of the Company, certifying that the Company Shares are not “United States real property interests” (within the meaning of Section 897(c)(1) of the Code), which the Purchaser is hereby authorized to deliver to the Internal Revenue Service on behalf of the Company after the Closing; provided that, if no such certificate is delivered at the Closing, Purchaser’s sole remedy shall be to deduct and withhold pursuant to Section 3.6 of this Agreement; (iii) to the extent that the Company Shares are in certificate form, deliver to Purchaser stock certificates evidencing the Company Shares, free and clear of all Encumbrances, other than restrictions on transfer imposed by applicable securities laws, duly endorsed in blank or accompanied by stock powers or other instruments of transfer duly executed in blank, with all required stock transfer Tax stamps affixed thereto, and to the extent that the Company Shares are not in certificate form, deliver to the Purchaser stock powers or other instruments of transfer duly executed in form for transfer, free and clear of Encumbrances, with respect to the Company Shares and such other documentation as is reasonably required to transfer the Company Shares in full to Purchaser; (iv) deliver to Purchaser (a) duly executed payoff letters (each, a “Payoff Letter”) in form and substance reasonably satisfactory to Purchaser from all financial institutions and other Persons to which any of the Indebtedness listed in Section 2.3 of the Company Disclosure Schedule is owed, or the applicable agent, trustee or other representative on behalf of such Persons, each of which Payoff Letters shall (x) indicate the total amount required to be paid to fully satisfy all principal, interest, prepayment premiums, penalties, breakage costs or other outstanding and unpaid obligations related to such Indebtedness as of the Closing Date (the “Payoff Amount”) and (y) state that all indebtedness, commitments, obligations (including guarantees) in respect thereof (subject to contingent indemnification obligations not yet accrued and payable and other obligations that expressly survive pursuant to the terms governing such indebtedness) and Encumbrances in connection therewith on the assets of the Company or any of its Subsidiaries shall be, substantially concurrently with the receipt of the Payoff Amount on the Closing Date by the Persons holding such Indebtedness, discharged and terminated in full and released or arrangements reasonably satisfactory to Purchaser for such release shall have been made by such time, subject, as applicable, to the replacement (or cash collateralization or backstopping) of any then-outstanding letters of credit or similar Indebtedness thereunder and (b) all documents, filings, and instruments necessary or customary to evidence the termination and release referred to in the preceding clause (a) (the “Release Documents”, together with each Payoff Letter, the “Payoff Documentation”); (v) deliver to Purchaser the resignations referred to in Section 7.16; and (vi) deliver to Purchaser the closing certificate contemplated by Section 8.2(c).

  • Equipment Specifications All equipment must meet the contract specifications and all federal and State safety codes and regulations in effect at the date of manufacture. All equipment must be Original Equipment Manufacturer (OEM) equipment unless otherwise stated in the contract. All products, materials, supplies, replacement parts, and equipment offered and furnished must be new, of current manufacturer production, and must have been formally announced by the manufacturer as being commercially available, unless otherwise stated in this Contract.

  • Seller Closing Deliverables Seller shall have delivered to Purchaser each of the certificates, instruments, agreements, documents and other items required to be delivered pursuant to Section 3.5 at or prior to the Closing Date.

  • Purchased Assets Upon the terms set forth in this Agreement and subject to the conditions hereof and the provisions of Section 1.6, at the Closing, Seller will sell, transfer, assign, convey and deliver to Buyer, and Buyer will purchase and accept from Seller, all right, title and interest of Seller in, to and under the following properties (collectively, the “Purchased Assets”): (a) subject to Section 1.5, the Land, together with all structures, buildings, improvements, machinery, fixtures, and equipment affixed or attached to the Land and all easements and rights appurtenant thereto, including: (i) all easements, privileges and rights belonging or in any way appurtenant to the Land; and (ii) any and all air rights, subsurface rights, development rights, and water rights appurtenant to the Land (all of the foregoing being collectively referred to herein as the “Owned Real Property”), but expressly excluding the Removed Real Property; (b) all tangible personal property owned by Seller and used in connection with the Owned Real Property as of the date of this Agreement, including, specifically, without limitation, all equipment, furniture, tools and supplies (including all construction materials, work-in-process, finished goods, goods in transit, manufactured and purchased supplies and other materials) and any other personal property as is owned by the Seller, whether located on the Owned Real Property or with suppliers or others as of the date of this Agreement (collectively, the “Personal Property”); (c) the Home Sale Contracts as of the Closing Date (the “Assigned Home Sale Contracts”); (d) all xxxxxxx money deposits and other forms of security (whether or not held in escrow) held or controlled by or for Seller pursuant to the Assigned Home Sale Contracts (“Home Sale Contract Deposits”); (e) all customer and vendor lists, and business and financial records, books, and documents (including any books and records or documents relating to Taxes imposed on the Purchased Assets), to the extent any of the foregoing are related to or used with respect to the Owned Real Property, Personal Property or the Assigned Contracts, including all of Seller’s rights to architectural and engineering plans, subject to applicable fees for the reuse, signing and sealing of such plans, water and sewer, electrical and building plans, and all other plans and specifications, drawings and other similar documents, in each case relating to the Owned Real Property; (f) all rights, obligations, and duties of Seller arising out of Contracts relating to the construction of Housing Units in the Ordinary Course or otherwise listed on Section 1.1(f) of the Disclosure Schedule (other than those related to Housing Units that have been sold prior to the Closing) (collectively, the “Other Contracts” and, together with the Assigned Home Sale Contracts, the “Assigned Contracts”); (g) all Permits in the name of Seller and related to the Owned Real Property (the “Assigned Permits”); and (h) all of Seller’s rights as declarant or similar capacity under CC&Rs with respect to Associations.

  • Metering Equipment 13.01. Utility will furnish, install, own and maintain metering equipment capable of measuring the flow of kilowatt-hours (kWh) of energy. The Customer's service associated with the CRG will be metered at a single metering point. The metering equipment will measure energy delivered by Utility to Customer and also measure energy delivered by Customer to Utility. Customer agrees to provide safe and reasonable access to the premises for installation of this equipment and its future maintenance or removal.

  • Minimum Condition and Warranty Requirements for TIPS Sales All goods quoted or sold through a TIPS Sale shall be new unless clearly stated otherwise in writing. All new goods and services shall include the applicable manufacturers minimum standard warranty unless otherwise agreed to in the Supplemental Agreement.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!