Common use of Special Equipment, Warranties and Guaranties Clause in Contracts

Special Equipment, Warranties and Guaranties. (a) It is recognized that certain equipment of a highly technical and specialized nature may be installed at Covered Project sites. The nature of the equipment, together with the requirements for manufacturer's warranties, may dictate that it be prefabricated, pre-piped, and/or pre-wired and that it be installed under the supervision and direction of the City's and/or manufacturer's personnel. The Unions agree that such equipment is to be installed without incident. (b) The Parties recognize that the Contractor will initiate from time to time the use of new technology, equipment, machinery, tools, and other labor-savings devices and methods of performing Project Work. The Unions agree that they will not restrict the implementation of such devices or work methods. The Unions will accept and will not refuse to handle, install, or work with any standardized and/or catalogue parts, assemblies, accessories, prefabricated items, preassembled items, partially assembled items, or materials whatever their source of manufacture or construction. (c) If any disagreement between the Contractor and the Unions concerning the methods of implementation or installation of any equipment, device, or item, or method of work arises, or whether a particular part or pre-assembled item is a standardized or catalog part or item, the work will proceed as directed by the Contractor, and the Parties shall immediately consult over the matter. If the disagreement is not resolved, the affected Union(s) shall have the right to proceed through the procedures set forth in Article 10.

Special Equipment, Warranties and Guaranties. (a) It is recognized that certain equipment of a highly technical and specialized nature may be installed at Covered Project sites. The nature of the equipment, together with the requirements for manufacturer's warranties, may dictate that it be prefabricated, pre-piped, and/or pre-wired and that it be installed under the supervision and direction of the City's and/or manufacturer's personnel. The Unions agree that such equipment is to be installed without incident. (b) The Parties recognize that the Contractor will initiate from time to time the use of new technology, equipment, machinery, tools, and other labor-savings devices and methods of performing Project Covered Work. The Unions agree that they will not restrict the implementation of such devices or work methods. The Unions will accept and will not refuse to handle, install, or work with any standardized and/or catalogue parts, assemblies, accessories, prefabricated items, preassembled items, partially assembled items, modular products or materials materials, whatever their source of manufacture or construction. (c) If any disagreement between the Contractor and the Unions concerning the methods of implementation or installation of any equipment, device, or item, or method of work arises, or whether a particular part or pre-assembled item is a standardized or catalog part or item, the work will proceed as directed by the Contractor, and the Parties shall immediately consult over the matter. If the disagreement is not resolved, the affected Union(s) shall have the right to proceed through the procedures set forth in Article 10.

Special Equipment, Warranties and Guaranties. (a) It is recognized that certain equipment of a highly technical and specialized nature may be installed at Covered Project Work sites. The nature of the equipment, together with the requirements for manufacturer's ’s warranties, may dictate that it be prefabricated, pre-piped, piped and/or pre-wired and that it be installed under the supervision and direction of the City's District’s and/or manufacturer's ’s personnel. The Unions agree that such equipment is to be installed without incident. (b) The Parties parties recognize that the Contractor will initiate from time to time-to-time the use of new technology, equipment, machinery, tools, and other labor-savings saving devices and methods of performing Project Work. The Unions agree Union agrees that they will not restrict the implementation of such devices or work methods. The Unions will accept and will not refuse to handle, install, install or work with any standardized and/or catalogue catalog parts, assemblies, accessories, prefabricated pre-fabricated items, preassembled pre-assembled items, partially assembled items, or materials materials, whatever their source of manufacture or construction. (c) If any disagreement between the Contractor and the Unions Union(s) concerning the methods of implementation or installation of any equipment, device, device or item, or method of work work, arises, or whether a particular part or pre-assembled item is a standardized or a catalog part or item, the work will proceed as directed by the Contractor, Contractor and the Parties parties shall immediately consult over the matter. If the disagreement is not resolved, the affected Union(s) shall have the right to proceed through the procedures set forth in Article 10.

Special Equipment, Warranties and Guaranties. (a) It is recognized that certain equipment of a highly technical and specialized nature may be installed at Covered Project Work sites. The nature of the equipment, together with the requirements for manufacturer's ’s warranties, may dictate that it be prefabricated, pre-piped, piped and/or pre-wired and that it be installed under the supervision and direction of the City's District’s and/or manufacturer's ’s personnel. The Unions agree that to install such equipment is to be installed without incident. (b) The Parties recognize that the Contractor will initiate from time to time the use of new technology, equipment, machinery, tools, and other labor-savings devices and methods of performing Project Work. The Unions agree Union agrees that they will not restrict the implementation of such devices or work methods. The Unions will accept and will not refuse to handle, install, install or work with any standardized and/or catalogue catalogue: parts, assemblies, accessories, prefabricated items, preassembled items, partially assembled items, or materials whatever their source of manufacture or construction. (c) If any disagreement between the Contractor and the Unions concerning the methods of implementation or installation of any equipment, device, or device or item, or method of work work, arises, or whether a particular part or pre-assembled item is a standardized or catalog part or item, the work will proceed precede as directed by the Contractor, Contractor and the Parties shall immediately consult over the matter. If the disagreement is not resolved, the affected Union(s) shall have the right to proceed through the procedures set forth in Article 10. (d) In limited circumstances requiring special knowledge of the particular item(s), the installation of specialty process equipment or systems may be performed by employees of a manufacturer, or by designated representatives of the manufacturer, if necessary to maintain the manufacturer’s warranty or guarantee, provided, however, that the manufacturer can demonstrate by an enumeration of specific tasks that the work cannot be performed by craft workers covered by this Agreement

Special Equipment, Warranties and Guaranties. (a) It is recognized that certain equipment of a highly technical and specialized nature may be installed at Covered Project Work sites. The nature of the equipment, together with the requirements for manufacturer's warranties, may dictate that it be prefabricated, pre-piped, piped and/or pre-wired and that it be installed under the supervision and direction of the CityDistrict's and/or manufacturer's personnelpersonnel with or without application of the PLA. The Unions agree that such equipment is to be installed without incident. (b) The Parties recognize that the Contractor will initiate from time to time the use of new technology, equipment, machinery, tools, and other labor-savings devices and methods of performing Project Work. The Unions agree that they will not restrict the implementation of such devices or work methods. methods The Unions will accept and will not refuse to handle, install, install or work with any standardized and/or catalogue parts, assemblies, accessories, prefabricated items, preassembled items, partially assembled items, or materials whatever their source of manufacture or construction. (c) If any disagreement between the Contractor and the Unions concerning the methods of implementation or installation of any equipment, device, device or item, or method of work work, arises, or whether a particular part or pre-assembled item is a standardized or catalog part or item, the work will proceed as directed by the Contractor, Contractor and the Parties shall immediately consult over the matter. If the disagreement is not resolved, the affected Union(s) shall have the right to proceed through the procedures set forth in Article 1012.

Special Equipment, Warranties and Guaranties. (a) It is recognized that certain equipment of a highly technical and specialized nature may be installed at Covered Project Work sites. The nature of the equipment, together with the requirements for manufacturer's ’s warranties, may dictate that it be prefabricated, pre-piped, and/or or pre-wired wired, and that it be installed under the supervision and direction of the City's District’s and/or manufacturer's ’s personnel. The Unions agree that to install such equipment is to be installed without incidentdisruption. (b) The Parties recognize that the Contractor Contractors will initiate initiate, from time to time time-to-time, the use of new technology, equipment, machinery, tools, and other labor-savings devices and methods of performing Project Work. The Unions agree that they will not restrict the implementation of such devices or work methods. The Unions will accept and will not refuse to handle, install, or work with any standardized and/or catalogue or catalog parts, assemblies, accessories, prefabricated items, preassembled items, partially assembled items, or materials materials, whatever their source of manufacture or construction. (c) If any disagreement between the Contractor and the Unions concerning the methods of implementation or installation of any equipment, device, or item, or method of work arises, or whether a particular part or pre-assembled item is a standardized or catalog part or item, the work will proceed as directed by the Contractor, and the Parties shall immediately promptly consult over the matter. If the disagreement is not resolved, the affected Union(s) Unions shall have the right to proceed through the procedures set forth in Article 10herein.

Special Equipment, Warranties and Guaranties. (a) It is recognized that certain equipment of a highly technical and specialized nature may be installed at Covered Project sites. The nature of the equipment, together with the requirements for manufacturer's warranties, may dictate that it be prefabricated, pre-piped, and/or pre-wired and that it be installed by and/or under the supervision and direction of the City's and/or manufacturer's personnel. The Unions agree that such equipment is to be installed without incident. (b) The Parties recognize that the Contractor will initiate from time to time the use of new technology, equipment, machinery, tools, and other labor-savings devices and methods of performing Project Work. The Unions agree that they will not restrict the implementation of such devices or work methods. The Unions will accept and will not refuse to handle, install, or work with any standardized and/or catalogue parts, assemblies, accessories, prefabricated items, preassembled items, partially assembled items, modular products or materials materials, whatever their source of manufacture or construction. (c) If any disagreement between the Contractor and the Unions concerning the methods of implementation or installation of any equipment, device, or item, or method of work arises, or whether a particular part or pre-assembled item is a standardized or catalog part or item, the work will proceed as directed by the Contractor, and the Parties shall immediately consult over the matter. If the disagreement is not resolved, the affected Union(s) shall have the right to proceed through the procedures set forth in Article 10.

Special Equipment, Warranties and Guaranties. (a) It is recognized that certain equipment of a highly technical and specialized nature may be installed at Covered Project Work sites. The nature of the equipment, together with the requirements for manufacturer's ’s warranties, may dictate that it be prefabricated, prefabricated pre-piped, piped and/or pre-wired and that it be installed under the supervision and direction of the City's District’s and/or manufacturer's ’s personnel. The Unions agree that such equipment is to be installed without incident. (b) The Parties recognize that the Contractor will initiate from time to time the use of new technology, equipment, machinery, tools, and other labor-savings devices and methods of performing Project Work. The Unions agree Union agrees that they will not restrict the implementation of such devices or work methods. The Unions will accept and will not refuse to handle, install, install or work with any standardized and/or catalogue catalogue: parts, assemblies, accessories, prefabricated items, preassembled items, partially assembled items, or materials whatever their source of manufacture or construction. (c) If any disagreement between the Contractor and the Unions concerning the methods of implementation or installation of any equipment, device, or device or item, or method of work work, arises, or whether a particular part or pre-assembled item is a standardized or catalog part or item, the work will proceed precede as directed by the Contractor, Contractor and the Parties shall immediately consult over the matter. If the disagreement is not resolved, the affected Union(s) shall have the right to proceed through the procedures set forth in Article 10.

Special Equipment, Warranties and Guaranties. (a) 9.4.1 It is recognized that certain equipment of a highly technical and specialized nature may be installed at Covered Project Work sites. The nature of the equipment, together with the requirements for manufacturer's warranties, may dictate that it be prefabricated, prefabricated pre-piped, piped and/or pre-wired and that it be installed under the supervision and direction of the City's and/or manufacturer's personnel. The Provided that Union employees are qualified and/or certified to perform such specialized work, Unions agree that to install such equipment is without incident to be insure compliance with the specifications for the equipment being installed without incidentand to insure compliance with contract documents, including but not limited to, plans, specifications, warranty requirements and scope of work under contract documents. (b) 9.4.2 The Parties recognize that the Contractor will initiate from time to time the use of new technology, equipment, machinery, tools, and other labor-savings devices and methods of performing Project Work. The Unions agree Union agrees that they will not restrict the implementation of such devices or work methods. The Unions will accept and will not refuse to handle, install, install or work with any standardized and/or catalogue catalogue: parts, assemblies, accessories, prefabricated items, preassembled items, partially assembled items, items or materials whatever their source of manufacture or construction. (c) 9.4.3 If any disagreement between the Contractor and the Unions concerning the methods of implementation or installation of any equipment, device, or device or item, or method of work work, arises, or whether a particular part or pre-assembled item is a standardized or catalog part or item, the work will proceed precede as directed by the Contractor, Contractor and the Parties shall immediately consult over the matter. If the disagreement is not resolved, the affected Union(s) shall have the right to proceed through the procedures set forth in Article 10.

Special Equipment, Warranties and Guaranties. (a) It is recognized that certain equipment of a highly technical and specialized nature may be installed at Covered Project sites. The nature of the equipment, together with the requirements for manufacturer's warranties, may dictate that it be prefabricated, pre-piped, and/or pre-wired and that it be installed under the supervision and direction of the City's and/or manufacturer's personnel. The Unions agree that such equipment is to be installed without incident. (b) The Parties recognize that the Contractor will initiate from time to time the use of new technology, equipment, machinery, tools, and other labor-savings devices and methods of performing Project Work. The Unions agree that they will not restrict the implementation of such devices or work methods. The Unions will accept and will not refuse to handle, install, or work with any standardized and/or catalogue parts, assemblies, accessories, prefabricated items, preassembled items, partially assembled items, modular products or materials materials, whatever their source of manufacture or construction. (c) If any disagreement between the Contractor and the Unions concerning the methods of implementation or installation of any equipment, device, or item, or method of work arises, or whether a particular part or pre-assembled item is a standardized or catalog part or item, the work will proceed as directed by the Contractor, and the Parties shall immediately consult over the matter. If the disagreement is not resolved, the affected Union(s) shall have the right to proceed through the procedures set forth in Article 10.

Special Equipment, Warranties and Guaranties. (a) It is recognized that certain equipment of a highly technical and specialized nature may be installed at Covered Project Work sites. The nature of the equipment, together with the requirements for manufacturer's warranties, may dictate that it be prefabricated, pre-piped, pre- piped and/or pre-wired and that it be installed under the supervision and direction of the CityDistrict's and/or manufacturer's personnel. The Unions agree that such equipment is to be installed without incident. (b) The Parties recognize parties recognized that the Contractor contractor will initiate from time to time the use of new technology, equipment, machinery, tools, and other labor-savings devices and methods of performing Project Work. The Unions agree Union agrees that they will not restrict the implementation of such devices or work methods. The Unions will accept and will not refuse to handle, install, install or work with any standardized and/or catalogue catalogue: parts, assemblies, accessories, . prefabricated items, preassembled items, partially assembled items, or materials whatever their source of manufacture or construction. (c) If any disagreement between the Contractor contractor and the Unions concerning the methods of implementation or installation of any equipment, device, or device or item, or method of work work, arises, or whether a particular part or pre-assembled item is a standardized or catalog part or item, the work will proceed precede as directed by the Contractor, contractor and the Parties parties shall immediately consult over the matter. If the disagreement is not resolved, the affected Union(s) shall have the right to proceed through the procedures set forth in Article 10.