Common use of Special Equipment, Warranties and Guaranties Clause in Contracts

Special Equipment, Warranties and Guaranties. (a) It is recognized that certain equipment of a highly technical and specialized nature may be installed at Project Work sites. The nature of the equipment, together with the requirements for manufacturer’s warranties, may dictate that it be prefabricated pre- piped and/or pre-wired and that it be installed under the supervision and direction of the District’s and/or manufacturer’s personnel. The Unions agree to install such equipment without incident. (b) The Parties recognize that the Contractor will initiate from time to time the use of new technology, equipment, machinery, tools, and other labor-savings devices and methods of performing Project Work. The Unions agree that they will not restrict the implementation of such devices or work methods. The Unions will accept and will not refuse to handle, install or work with any standardized and/or catalogue parts, assemblies, accessories, prefabricated items, preassembled items, partially assembled items, or materials whatever their source of manufacture or construction. (c) If there is any disagreement between the Contractor and the Unions concerning the methods of implementation or installation of any equipment, device or item, or method of work, or whether a particular part or pre-assembled item is a standardized or catalog part or item, the work will proceed as directed by the Contractor and the Parties shall immediately consult over the matter. If the disagreement is not resolved, the affected Union(s) shall have the right to use the procedures set forth in Article 10.

Special Equipment, Warranties and Guaranties. (a) It is recognized that certain equipment of a highly technical and specialized nature may be installed at Project Work sites. The nature of the equipment, together with the requirements for manufacturer’s warranties, may dictate that it be prefabricated pre- prefabricated, pre-piped and/or pre-wired and that it be installed under the supervision and direction of the DistrictCollege’s and/or manufacturer’s personnel. The Unions agree to install such equipment without incident. (b) The Parties recognize that the Contractor will initiate from time to time the use of new technology, equipment, machinery, tools, and other labor-savings devices and methods of performing Project Work. The Unions agree Union agrees that they will not restrict the implementation of such devices or work methods. The Unions will accept and will not refuse to handle, install or work with any standardized and/or catalogue catalogue: parts, assemblies, accessories, prefabricated items, preassembled items, partially assembled items, or materials whatever their source of manufacture or construction. (c) If there is any disagreement between the Contractor and the Unions concerning the methods of implementation or installation of any equipment, or device or item, or method of work, arises, or whether a particular part or pre-assembled item is a standardized or catalog part or item, the work will proceed as directed by the Contractor and the Parties shall immediately consult over the matter. If the disagreement is not resolved, the affected Union(s) shall have the right to use proceed through the procedures set forth in Article 1011.

Special Equipment, Warranties and Guaranties. (a) It is recognized that certain equipment of a highly technical and specialized nature may be installed at Project Work sites. The nature of the equipment, together with the requirements for manufacturer’s warranties, may dictate that it be prefabricated pre- prefabricated, pre-piped and/or pre-wired and that it be installed under the supervision and direction of the DistrictCollege’s and/or manufacturer’s personnel. The Unions agree to install such equipment without incident. (b) The Parties recognize that the Contractor will initiate from time to time the use of new technology, equipment, machinery, tools, and other labor-savings devices and methods of performing Project Work. The Unions agree Union agrees that they will not restrict the implementation of such devices or work methods. The Unions will accept and will not refuse to handle, install or work with any standardized and/or catalogue catalogue: parts, assemblies, accessories, prefabricated items, preassembled items, partially assembled items, or materials whatever their source of manufacture or construction. (c) If there is any disagreement between the Contractor and the Unions concerning the methods of implementation or installation of any equipment, or device or item, or method of work, arises, or whether a particular part or pre-assembled item is a standardized or catalog part or item, the work will proceed precede as directed by the Contractor and the Parties shall immediately consult over the matter. If the disagreement is not resolved, the affected Union(s) shall have the right to use proceed through the procedures set forth in Article 10.

Special Equipment, Warranties and Guaranties. (a) It is recognized that certain equipment of a highly technical and specialized nature may be installed at Project Work sites. The nature of the equipment, together with the requirements for manufacturer’s 's warranties, may dictate that it be prefabricated pre- prefabricated, pre-piped and/or pre-wired and that it be installed under the supervision and direction of the District’s 's and/or manufacturer’s 's personnel. The Unions agree to install that such equipment is to be installed without incident. (b) The Parties recognize that the Contractor will initiate from time to time the use of new technology, equipment, machinery, tools, and other labor-savings devices and methods of performing Project Work. The Unions agree that they will not restrict the implementation of such devices or work methods. methods The Unions will accept and will not refuse to handle, install or work with any standardized and/or catalogue parts, assemblies, accessories, prefabricated items, preassembled items, partially assembled items, or materials whatever their source of manufacture or construction. (c) If there is any disagreement between the Contractor and the Unions concerning the methods of implementation or installation of any equipment, device or item, or method of work, arises, or whether a particular part or pre-assembled item is a standardized or catalog part or item, the work will proceed as directed by the Contractor and the Parties shall immediately consult over the matter. If the disagreement is not resolved, the affected Union(s) shall have the right to use proceed through the procedures set forth in Article 1012.

Special Equipment, Warranties and Guaranties. (a) 9.4.1 It is recognized that certain equipment of a highly technical and specialized nature may be installed at Project Work sites. The nature of the equipment, together with the requirements for manufacturer’s warranties, may dictate that it be prefabricated pre- pre-piped and/or pre-wired and that it be installed under the supervision and direction of the DistrictCity’s and/or manufacturer’s personnel. The Unions agree to install such equipment without incident. (b) 9.4.2 The Parties recognize that the Contractor will initiate from time to time the use of new technology, equipment, machinery, tools, and other labor-savings devices and methods of performing Project Work. The Unions agree Union agrees that they will not restrict the implementation of such devices or work methods. The Unions will accept and will not refuse to handle, install or work with any standardized and/or catalogue catalogue: parts, assemblies, accessories, prefabricated items, preassembled items, partially assembled items, or materials whatever their source of manufacture or construction. (c) 9.4.3 If there is any disagreement between the Contractor and the Unions concerning the methods of implementation or installation of any equipment, or device or item, or method of work, arises, or whether a particular part or pre-assembled item is a standardized or catalog part or item, the work will proceed precede as directed by the Contractor and the Parties shall immediately consult over the matter. If the disagreement is not resolved, the affected Union(s) shall have the right to use proceed through the procedures set forth in Article 10.

Special Equipment, Warranties and Guaranties. (a) It is recognized that certain equipment of a highly technical and specialized nature may be installed at Project Work sites. The nature of the equipment, together with the requirements for manufacturer’s warranties, may dictate that it be prefabricated pre- prefabricated, pre-piped and/or pre-wired and that it be installed under the supervision and direction of the DistrictCity’s and/or manufacturer’s personnel. The Unions agree to install that such equipment is to be installed without incident. (b) The Parties parties recognize that the Contractor will initiate from time to time the use of new technology, equipment, machinery, tools, and other labor-savings devices and methods of performing Project Work. The Unions agree that they will not restrict the implementation of such devices or work methods. The Unions will accept and will not refuse to handle, install or work with any standardized and/or catalogue parts, assemblies, accessories, prefabricated items, preassembled pre-assembled items, partially assembled items, or materials whatever their source of manufacture or construction. (c) If there is any disagreement between the Contractor and the Unions concerning the methods of implementation or installation of any equipment, or device or item, or method of work, arises, or whether a particular part or pre-assembled item is a standardized or catalog part or item, the work will proceed precede as directed by the Contractor and the Parties parties shall immediately consult over the matter. If the disagreement is not resolved, the affected Union(s) shall have the right to use proceed through the procedures set forth in Article 10.

Special Equipment, Warranties and Guaranties. (a) It is recognized that certain equipment of a highly technical and specialized nature may be installed at Project Work sites. The nature of the equipment, together with the requirements for manufacturer’s 's warranties, may dictate that it be prefabricated pre- pre-piped and/or pre-wired and that it be installed under the supervision and direction of the District’s 's and/or manufacturer’s 's personnel. The Unions agree to install that such equipment is to be installed without incident. (b) The Parties parties recognize that the Contractor will initiate from time to time the use of new technology, equipment, machinery, tools, and other labor-savings devices and methods of performing Project Work. The Unions agree that they will not restrict the implementation of such devices or work methods. The Unions will accept and will not refuse to handle, install or work with any standardized and/or catalogue catalogue: parts, assemblies, accessories, prefabricated items, preassembled items, partially assembled items, or materials whatever their source of manufacture or construction. (c) If there is any disagreement between the Contractor and the Unions concerning the methods of implementation or installation of any equipment, or device or item, or method of work, arises, or whether a particular part or pre-assembled item is a standardized or catalog part or item, the work will proceed precede as directed by the Contractor and the Parties parties shall immediately consult over the matter. If the disagreement is not resolved, the affected Union(s) shall have the right to use proceed through the procedures set forth in Article 10.

Special Equipment, Warranties and Guaranties. (a) It is recognized that certain equipment of a highly technical and specialized nature may be installed at Project Work sites. The nature of the equipment, together with the requirements for manufacturer’s 's warranties, may dictate that it be prefabricated pre- prefabricated, pre-piped and/or pre-wired and that it be installed under the supervision and direction of the District’s 's and/or manufacturer’s 's personnel. The Unions agree to install that such equipment is to be installed without incident. (b) The Parties recognize that the Contractor will initiate from time to time the use of new technology, equipment, machinery, tools, and other labor-labor- savings devices and methods of performing Project Work. The Unions agree that they will not restrict the implementation of such devices or work methods. The Unions will accept and will not refuse to handle, install or work with any standardized and/or catalogue parts, assemblies, accessories, prefabricated items, preassembled items, partially assembled items, or materials whatever their source of manufacture or construction. (c) If there is any disagreement between the Contractor and the Unions concerning the methods of implementation or installation of any equipment, device or item, or method of work, arises, or whether a particular part or pre-assembled item is a standardized or catalog part or item, the work will proceed as directed by the Contractor and the Parties shall immediately consult over the matter. If the disagreement is not resolved, the affected Union(s) shall have the right to use proceed through the procedures set forth in Article 1012.

Special Equipment, Warranties and Guaranties. (a) 8.4.1 It is recognized that certain equipment of a highly technical and specialized nature may be installed at Project Work sites. The nature of the equipment, together with the requirements for manufacturer’s warranties, may dictate that it be prefabricated pre- prefabricated, pre-piped and/or pre-wired and that it be installed under the supervision and direction of the DistrictCollege’s and/or manufacturer’s personnel. The Unions agree to install such equipment without incident. (b) 8.4.2 The Parties recognize that the Contractor will initiate from time to time the use of new technology, equipment, machinery, tools, and other labor-savings devices and methods of performing Project Work. The Unions agree Union agrees that they will not restrict the implementation of such devices or work methods. The Unions will accept and will not refuse to handle, install or work with any standardized and/or catalogue catalogue: parts, assemblies, accessories, prefabricated items, preassembled items, partially assembled items, or materials whatever their source of manufacture or construction. (c) 8.4.3 If there is any disagreement between the Contractor and the Unions concerning the methods of implementation or installation of any equipment, or device or item, or method of work, arises, or whether a particular part or pre-assembled item is a standardized or catalog part or item, the work will proceed precede as directed by the Contractor and the Parties shall immediately consult over the matter. If the disagreement is not resolved, the affected Union(s) shall have the right to use proceed through the procedures set forth in Article 109.