Certain State Law Requirements for Contracts The contents of this Section are required by Texas Law and are included by County regardless of content. For purposes of Sections 2252.152, 2271.002, and 2274.002, Texas Government Code, as amended, C&T hereby verifies that C&T and any parent company, wholly owned subsidiary, majority-owned subsidiary, and affiliate:
a. Unless affirmatively declared by the United States government to be excluded from its federal sanctions regime relating to Sudan or Iran or any federal sanctions regime relating to a foreign terrorist organization, is not identified on a list prepared and maintained by the Texas Comptroller of Public Accounts under Sections 806.051, 807.051, or 2252.153 of the Texas Government Code.
b. If employing ten (10) or more full-time employees and this Agreement has a value of
Requirements for Protection In compliance with NPCC requirements and Good Utility Practice, Developer shall provide, install, own, and maintain relays, circuit breakers and all other devices necessary to remove any fault contribution of the Large Generating Facility to any short circuit occurring on the New York State Transmission System not otherwise isolated by Connecting Transmission Owner’s equipment, such that the removal of the fault contribution shall be coordinated with the protective requirements of the New York State Transmission System. Such protective equipment shall include, without limitation, a disconnecting device or switch with load- interrupting capability located between the Large Generating Facility and the New York State Transmission System at a site selected upon mutual agreement (not to be unreasonably withheld, conditioned or delayed) of the Developer and Connecting Transmission Owner. Developer shall be responsible for protection of the Large Generating Facility and Developer’s other equipment from such conditions as negative sequence currents, over- or under-frequency, sudden load rejection, over- or under-voltage, and generator loss-of-field. Developer shall be solely responsible to disconnect the Large Generating Facility and Developer’s other equipment if conditions on the New York State Transmission System could adversely affect the Large Generating Facility.
Audit Requirements for Recipients of State Financial Assistance For purposes of this paragraph, the word "Contractor" shall be deemed to mean "nonstate entity," as that term is defined in section 4-230 of the Connecticut General Statutes. The Contractor shall provide for an annual financial audit acceptable to the Client Agency for any expenditure of State awarded funds made by the Contractor. Such audit shall include management letters and audit recommendations. The State Auditors of Public Accounts shall have access to all records and accounts for the fiscal year(s) in which the award was made. The Contractor shall comply with federal and State single audit standards as applicable.
SERVICE REQUIREMENTS FOR REFERRED CLIENTS A. Agent agrees to respond to any communications from a Referred Client within two (2) hours after receipt if such communication is received between 9:00am to 5:00pm local time. For communications received outside of these hours, Agent agrees to respond by 10:00am the next day.
B. Agent agrees to update XXXX.xxx with status updates within 48 hours after initial communication with a Referred Client and upon every significant status change until closing or abandoned. Updates shall be made by Agent via email to xxxxxxxxxxxx@xxxx.xxx.
C. Vacations or extended absences shall be reported, with length of pause, to XXXX.xxx via email to
D. Agent will not add Referred Client to any email list or calling list without the express permission of Referred Client.
E. Agent agrees XXXX.xxx has the right to survey the Referred Client at any time.
F. If Agent is contacted by a Referred Client that Agent is unwilling or unable to assist, Agent shall direct such Referred Client back to XXXX.xxx for assistance and notify XXXX.xxx at xxxxxxxxxxxx@xxxx.xxx.
G. Agent agrees that XXXX.xxx has no obligation to provide Agent with any number of referrals and that prospective clients are free to select the agent they wish to work with for any particular real estate transaction.
Minimum Shipping Requirements for TIPS Sales Vendor shall ship, deliver, or provide ordered goods and services within a commercially reasonable time after acceptance of the order. If a delay in delivery is anticipated, Vendor shall notify the TIPS Member as to why delivery is delayed and provide an updated estimated time for completion. The TIPS Member may cancel the order if the delay is not commercially acceptable or not consistent with the Supplemental Agreement applicable to the order.
Minimum Site Requirements for TIPS Sales (when applicable to TIPS Sale). Cleanup: When performing work on site at a TIPS Member’s property, Vendor shall clean up and remove all debris and rubbish resulting from their work as required or directed by the TIPS Member or as agreed by the parties. Upon completion of work, the premises shall be left in good repair and an orderly, neat, clean and unobstructed condition. Preparation: Vendor shall not begin a project for which a TIPS Member has not prepared the site, unless Vendor does the preparation work at no cost, or until TIPS Member includes the cost of site preparation in the TIPS Sale Site preparation includes, but is not limited to: moving furniture, installing wiring for networks or power, and similar pre‐installation requirements. Registered Sex Offender Restrictions: For work to be performed at schools, Vendor agrees that no employee of Vendor or a subcontractor who has been adjudicated to be a registered sex offender will perform work at any time when students are, or reasonably expected to be, present unless otherwise agreed by the TIPS Member. Vendor agrees that a violation of this condition shall be considered a material breach and may result in the cancellation of the TIPS Sale at the TIPS Member’s discretion. Vendor must identify any additional costs associated with compliance of this term. If no costs are specified, compliance with this term will be provided at no additional charge. Safety Measures: Vendor shall take all reasonable precautions for the safety of employees on the worksite, and shall erect and properly maintain all necessary safeguards for protection of workers and the public. Vendor shall post warning signs against all hazards created by the operation and work in progress. Proper precautions shall be taken pursuant to state law and standard practices to protect workers, general public and existing structures from injury or damage. Smoking: Persons working under Agreement shall adhere to the TIPS Member’s or local smoking statutes, codes, ordinances, and policies.
Additional Requirements for Sleeping Rooms The Contractor shall provide departing Attendees a secured area for storing belongings.
Minimum Customer Support Requirements for TIPS Sales Vendor shall provide timely and commercially reasonable support for TIPS Sales or as agreed to in the applicable Supplemental Agreement.
CFR PART 200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, class, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes
Annual Reports on Assessment of Compliance with Servicing Criteria (a) On or before March 1 of each year commencing in March 2018, the Master Servicer, the Special Servicer, the Certificate Administrator, the Custodian, the Operating Advisor and, if it has made (or is required to make) an Advance during the applicable calendar year, the Trustee, each at its own expense, shall furnish (and each of the preceding parties, as applicable, (i) with respect to any Servicing Function Participant of such party that is a Mortgage Loan Seller Sub-Servicer, shall use commercially reasonable efforts to cause such Servicing Function Participant to furnish, and (ii) with respect to any other Servicing Function Participant of such party (other than any party to this Agreement), shall cause such Servicing Function Participant to furnish) (each Master Servicer, the Special Servicer, the Certificate Administrator, the Custodian, the Operating Advisor, any Servicing Function Participant and, if it has made (or is required to make) an Advance during the applicable calendar year, the Trustee, as the case may be, a “Reporting Servicer”) to the Certificate Administrator, the Trustee, the Serviced Companion Loan Holders (or, in the case of a Serviced Companion Loan that is part of an Other Securitization Trust, the applicable Other Depositor and Other Exchange Act Reporting Party), the Operating Advisor (only in the case of a report furnished by the Special Servicer) and the Depositor, a report on an assessment of compliance with the Relevant Servicing Criteria (together with a copy thereof in XXXXX-Compatible Format, or in such other format as otherwise agreed upon by the Depositor, the Certificate Administrator, the applicable Other Depositor, the applicable Other Exchange Act Reporting Party and the applicable Certifying Servicer) that complies in all material respects with the requirements of Item 1122 of Regulation AB and contains (A) a statement by such Reporting Servicer of its responsibility for assessing compliance with the Relevant Servicing Criteria, (B) a statement that such Reporting Servicer used the Servicing Criteria to assess compliance with the Relevant Servicing Criteria, (C) such Reporting Servicer’s assessment of compliance with the Relevant Servicing Criteria as of the end of and for the preceding calendar year, including, if there has been any material instance of noncompliance with the Relevant Servicing Criteria, a discussion of each such failure and the nature and status thereof and (D) a statement that a registered public accounting firm has issued an attestation report on such Reporting Servicer’s assessment of compliance with the Relevant Servicing Criteria as of and for such period. Copies of all compliance reports delivered pursuant to this Section 10.09 shall be provided to any Certificateholder, upon the written request thereof, by the Certificate Administrator. Each such report shall be addressed to the Depositor and each Other Depositor (if addressed) and signed by an authorized officer of the applicable company, and shall address each of the Relevant Servicing Criteria specified on a certification substantially in the form of Exhibit O to this Agreement delivered to the Depositor on the Closing Date. Promptly after receipt of each such report, (i) the Depositor and each Other Depositor may review each such report and, if applicable, consult with the each Reporting Servicer as to the nature of any material instance of noncompliance with the Relevant Servicing Criteria, and (ii) the Certificate Administrator shall confirm that the assessments, taken individually address the Relevant Servicing Criteria for each party as set forth on Exhibit O to this Agreement and notify the Depositor of any exceptions. For the avoidance of doubt, the Trustee shall have no obligation or duty to determine whether any such report (other than any such report furnished by the Trustee or any Servicing Function Participant of the Trustee) is in form and substance in compliance with the requirements of Regulation AB.
(b) On the Closing Date, the Master Servicer, the Special Servicer, the Certificate Administrator, the Custodian, the Trustee and the Operating Advisor each acknowledge and agree that Exhibit O to this Agreement sets forth the Relevant Servicing Criteria for such party.
(c) No later than the end of each fiscal year for the Trust, the Master Servicer, the Special Servicer, the Certificate Administrator, the Custodian, the Operating Advisor and, if it has made (or is required to make) an Advance during such fiscal year, the Trustee shall notify the Certificate Administrator, the Depositor, each Other Exchange Act Reporting Party and each Other Depositor as to the name of each Servicing Function Participant utilized by it, and the Certificate Administrator shall notify the Depositor and each Other Depositor as to the name of each Servicing Function Participant utilized by it, during such fiscal year, and each such notice will specify what specific Servicing Criteria will be addressed in the report on assessment of compliance prepared by such Servicing Function Participant. When the Master Servicer, the Special Servicer, the Certificate Administrator, the Custodian, the Trustee (if applicable), the Operating Advisor and any Servicing Function Participant submit their assessments pursuant to Section 10.09(a) of this Agreement, such parties will also at such time include the assessment (and related attestation pursuant to Section 10.10 of this Agreement) of each Servicing Function Participant engaged by it. The fiscal year for the Trust shall be January 1 through and including December 31 of each calendar year.
(d) In the event the Master Servicer, the Special Servicer, the Certificate Administrator, the Custodian, the Trustee (if it has made, or is required to make, an Advance during the applicable period) or the Operating Advisor is terminated or resigns pursuant to the terms of this Agreement, such party shall provide, and each such party shall cause (or, if the Servicing Function Participant is a Mortgage Loan Seller Sub-Servicer, shall use commercially reasonable efforts to cause) any Servicing Function Participant of such party to provide (and the Master Servicer, the Special Servicer and the Certificate Administrator shall, with respect to any Servicing Function Participant that resigns or is terminated under any applicable servicing agreement, cause such Servicing Function Participant (or, in the case of each Servicing Function Participant that is a Mortgage Loan Seller Sub-Servicer, shall use commercially reasonable efforts to cause such Servicing Function Participant) to provide) an annual assessment of compliance pursuant to this Section 10.09, coupled with an attestation as required in Section 10.10 of this Agreement with respect to the period of time that the Master Servicer, the Special Servicer, the Certificate Administrator, the Custodian, the Trustee (if it has made, or is required to make, an Advance during such period of time) or the Operating Advisor was subject to this Agreement or the period of time that the applicable Servicing Function Participant was subject to such other servicing agreement. With respect to each Outside Serviced Mortgage Loan serviced under the applicable Outside Servicing Agreement, the Certificate Administrator shall use commercially reasonable efforts to obtain, and upon receipt deliver to the Depositor, an annual report on assessment of compliance as described in this Section and an attestation as described in Section 10.10 from the related Outside Servicer, Outside Special Servicer, Outside Custodian, Outside Trustee and Outside Paying Agent or Outside Certificate Administrator and in form and substance similar to the annual report on assessment of compliance described in this Section 10.09 and the attestation described in Section 10.10.
